Category Bids

Transportation & vehicles — open bids

750 open bids, newest first. Full details live here — you only leave for the official posting when you bid.

Northern California Area Office (NCAO) Low Bed Tra

Dept. of the Interior · Reclamation Contracting Activity  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesSolicitationSmall Business Set Aside - Total

NCAO Low Bed Trailer with Gooseneck Attachment

Closes Nov 16, 2026 · 11:00 AM
Read more →

Northern California Area Office (NCAO) Low Bed Tra

Dept. of the Interior · Reclamation Contracting Activity  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesSolicitationSmall Business Set Aside - Total

NCAO Low Bed Trailer with Gooseneck Attachment

Closes Nov 16, 2026 · 11:00 AM
Read more →

CUSHION,SURVIVAL KI

Department of Defense · DLA Weapons Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesCombined Synopsis/Solicitation

Proposed procurement for NSN 1680010680384 CUSHION,SURVIVAL KI: Line 0001 Qty 21 UI EA Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0222 DAYS ADO Approved source is 04577 194-780127-1. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.

Closes Nov 19, 2026
Read more →

Notice of Intent to Award Sole Source Contract

Federal Retirement Thrift Investment Board · OCFO - Contracting Office  |  Washington, District of Columbia  |  Posted Nov 5, 2026
Transportation & vehiclesSpecial NoticeNo Set aside used

This is a Special Notice of the Federal Retirement Thrift Investment Board's (FRTIB) intent to award a sole source contract to the Washington Metropolitan Area Transit Authority (WMATA), 300 Seventh Street, SW, Washington, DC 20024, for transit subsidy administration services. The contemplated award will provide access to WMATA's SmartBenefits� Program, which enables the electronic distribution and administration of transit benefits for eligible FRTIB employees participating in the Federal Transit Benefit Program. The anticipated period of performance is one (1) twelve-month base period and nineteen (19) twelve-month option periods. Exercise of any option period is at the sole discretion of the Government. Authority The Government intends to award this requirement on a sole source basis pursuant to FAR 13.106-1(b), Soliciting from a Single Source, as only one source is reasonably available to satisfy the agency's requirements. Sole Source Rationale WMATA is the sole owner, operator, and administrator of the SmartBenefits� Program, the transit benefit system utilized throughout the National Capital Region. The SmartBenefits� Program provides the infrastructure required to electronically distribute transit subsidies directly to employee transit accounts for use with participating regional transit providers. FRTIB has determined that WMATA is the only source capable of fulfilling this requirement because: WMATA exclusively administers the SmartBenefits� Program. The SmartBenefits� Program is the established regional transit benefit platform accepted by participating transit providers throughout the Washington metropolitan area. No other vendor possesses the rights, authority, or capability to provide access to, administer, or distribute benefits through the SmartBenefits� Program. The use of an alternate source would not satisfy the Government's requirement for participation in the regional transit subsidy program. Capability Statements This notice is not a request for competitive quotations or proposals. However, any responsible source that believes it can satisfy the requirement may submit a capability statement demonstrating its ability to provide the required services. Capability statements shall include sufficient information to clearly demonstrate the ability to provide transit subsidy administration services equivalent to those provided through WMATA's SmartBenefits� Program. Responses must be submitted via email to the Contracting Officer by 1:30 pm, Thursday, November 19, 2026. The Government will consider all capability statements received by the closing date solely for the purpose of determining whether competitive sources exist. A determination by the Government not to compete this requirement based upon responses to this notice is solely within the discretion of the Government.

Closes Nov 19, 2026 · 1:30 PM ET
Read more →

RFQ SHUTTLE SERVICES FOR VA CENTRAL CALIFORNIA HEALTH CARE SYSTEM

Dept. of Veterans Affairs · 261-NETWORK Contract Office 21 (36C261)  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesSolicitation

End of Amendment

Closes Nov 19, 2026 · 3:00 PM
Read more →

Supply and delivery of 2 x new Right-Hand Vehicles

Dept. of State · Embassy Pretoria  |  Pretoria, ZA-GT  |  Posted Nov 5, 2026
Transportation & vehiclesSolicitationNo Set aside used

The U.S. Embassy, Homeland Security Section in Pretoria, South Africa, is requesting quotes for the supply and delivery of 2 x new Right-Hand Vehicles, as per scope of work attached. The reference number for this quotation is: 19SF7527Q0002 Quotations: Quotes to be submitted by no later than close of business, November 19, 2026 and must be sent electronically to: Pretoria_Contracting_Office-dl@state.gov Firm fixed pricing is to be quoted. Delivery: DDP to Pretoria, South Africa, with all transport costs included. Quotes to be submitted on company letterhead, indicating the company�s address, contact details and name and email of the contact person. ALL vendors wishing to quote MUST be registered in the American System for Award Management (SAM). You can access the SAM database at https://sam.gov/ where you will find step by step instructions on how to register or update your SAM registration. Guidance on how to register in SAM.gov - https://www.fsd.gov Proof of your SAM registration must be submitted as part of your quotation package. NB!! To facilitate our evaluation process, we kindly request that you submit your quotation as two separate documents: Pricing Proposal � This document should include pricing only Technical Proposal � This document should contain the detailed technical specifications only. Please do not include any pricing information in this document. Separating the pricing and technical proposals will help ensure an efficient and impartial review process. U.S. Embassy Payment terms: Note that NO DEPOSIT payments will be authorized. The Embassy issues only fixed priced contracts: therefore, you must confirm that your prices will remain fixed. EFT � Payment will be made in 30 calendar days after delivery of services AND receipt of a proper invoice, whichever is later. Kindly be advised that as a Diplomatic Mission we represent the U.S. Government and are unable to sign any legal documents, including credit applications and T�s & C�s. By submitting a proposal, you waiver any such requirement. The following documents are attached to this email and need to be signed when submitting your quotations: The SCOPE OF WORK. The successful offeror will be required to: Must be registered on the SAM website (www.sam.gov). Must comply with the US Clauses (attached) signed document to be submitted with the quotes. South African Terms and Conditions do not apply; by submitting a quote, you accept the U.S. Embassy�s Terms and Conditions. Comply with the U.S. National Defense Authorization Act (NDAA) Section 889(a)(1)(B) (please refer to the attached PDF document)

Closes Nov 19, 2026 · 5:00 PM ET
Read more →

Oxygen Monitor, Acft

Department of Defense · DLA Aviation AT Oklahoma City, OK  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesPresolicitationNo Set aside used

Synopsis PR: FD2030-26-01346 1. Estimated issue date and estimated closing/response date: Issue: November 20, 2026 Closes: December 21, 2026 2. RFP# SPRTA1-27-R-0108 Request for Proposal 3. Service/Spare/Repair/OH: Spares 4. AMC: 1/C 5. Nomenclature/Noun: Oxygen Monitor, Acft 6. NSN: 1660-01-473-3548 7. PN: 16VK058-2, 3270074-0201 8. History: 26 Aug 2026, 2 each, Lockheed Martin Corporation (81755) 25 Aug 2026, 60 each, Lockheed Martin Corporation (81755) 9. Description/Function: Oxygen Monitor, Acft. DIMENSIONS, 5.0 INCH (L) BY 3.0 INCH (W) BY 2.5 INCH (H). WEIGHT, 2 POUNDS (LB). MATERIAL CONTENT, ALUMINUM. MEASURES THE OXYGEN CON- CENTRATION OF THE CONCENTRATOR PRODUCT GAS. APPL. F-16C ACFT. 10. Total Line Item Quantity: L/I 0001 � 1 each L/I 0002 � 2 each L/I 0003 � 3 each L/I 0004 � 4 each Total: 10 each 11. Application (Engine or Aircraft): F-16 12. Destination: Ship to: L/I 0001 � DLO002 L/I 0002 � TTK002 L/I 0003 � DPL002 L/I 0004 � DPL002 13. Required Delivery: L/I 0001 � On or before 31 JUL 2027 L/I 0002 � On or before 14 OCT 2027 L/I 0003 � On or before 21 OCT 2027 L/I 0004 � On or before 23 MAR 2028 14. Qualification Requirements: Qualification requirements are set forth in OC-ALC Source Approval Information Booklet. Due to the complexity and criticality of this part, only actual manufacturers that have successfully completed all testing required by the original company responsible for the design, can be considered approved sources for this item. 15. Export Control Requirements: Yes 16. UID: UID requirements will apply. 17. Qualified Sources: Lockheed Martin Corporation (81755) Mission Systems Davenport Inc (99251) 18. Set-aside: This acquisition will not be set aside. 19. Surplus: Surplus is not authorized. 20. Mandatory Language: The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM to inquire about the data or rights to the data. In accordance with FAR 5.207(c) (16) (i), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contract with the firms(s) listed. This acquisition involves technology that has a military or space application. The extent of foreign participation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation, regarding eligible sources (e.g., if this is a small business set aside, foreign sources may not participate as potential prime contractors but could, if otherwise eligible, participate as subcontractors). Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.sam.gov. Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. This notice of intent is not a request for competition. However, all proposals received within 45 days (30 days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at 385-591-1672. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for written quotation will be issued. Only written or faxed request received directly from the requestors are acceptable. The anticipated award date will be 90 days after the issuance of this notice. 21. Buyer name and email address: Questions concerning this synopsis or subsequent solicitation can be directed to the buyer Chrissy Turnage at christine.turnage@us.af.mil.

Closes Nov 20, 2026 · 4:00 PM
Read more →

Actuator, Electro-Mechanical

Department of Defense · DLA Aviation AT Oklahoma City, OK  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesPresolicitation

1. Estimated solicitation issue date and estimated closing/response date: Issue: 23 Nov 2026 Closes: 23 Dec 2026 2. RFP# SPRTA1-27-R-0061 3. Service/Spare/Repair/OH: Spares 4. AMC: 1/P 5. Nomenclature/Noun: Actuator, Electro-Mech 6. NSN: 1680-01-329-7411; 1680-01-378-1631 7. PN: 880T100-3; L16-8-5 8. History: 16 Apr 2018, 23 each, Whippany Actuation Systems, LLC (81039) 9. Description/Function: 12.5000" LG X6.0000" HI X 6.5000" WI,5.3750 LB Weight. Steel and aluminum. C-130 oil cooler door actuator opens and closes cooler door providing air flow. 10. Total Line Item Quantity: L/I 0001 100 Each (Range: 25-150) 11. Application (Engine or Aircraft): C-130 12. Destination: L/I 0001 Ship to SW3210 13. Required Delivery: L/I 0001 Ship To SW3210, On or Before 25 Feb 2028 14. Qualification Requirements: Do not exist. 15. Export Control Requirements: No 16. UID: Note to Contractor: UID requirements will apply. 17. Qualified Sources: Whippany Actuation Systems, LLC (81039); Aerocontrolex Group, Inc. (98889) 18. Set-aside: This acquisition will not be set aside. 19. Surplus: Surplus is not authorized. 20. Mandatory Language: The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM, to inquire about the data or rights to the data. In accordance with FAR 5.101(c)(4)(vi), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contract with the firms(s) listed. This acquisition involves technology that has a military or space application. The extent of foreign participation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation, regarding eligible sources (e.g., if this is a small business set aside, foreign sources may not participate as potential prime contractors but could, if otherwise eligible, participate as subcontractors). Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.sam.gov. Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.103. This notice of intent is not a request for competition. However, all proposals received within 45 days (30 days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (385) 591-1672. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for written quotation will be issued. Only written or faxed request received directly from the requestors are acceptable. The anticipated award date will be 90 days after the issuance of this notice. 21. Buyer name and email address: Questions concerning this synopsis or subsequent solicitation can be directed to the buyer Kristian Hollingshead at kristian.hollingshead.1@us.af.mil.

Closes Nov 20, 2026 · 2:00 PM
Read more →

SPRRA127RA008/ MOTOR-PUMP, HYDRAU

Department of Defense · DLA Aviation AT Huntsville, AL  |  0, Oklahoma  |  Posted Nov 5, 2026
Transportation & vehiclesPresolicitationNo Set aside used

Class Code: 16 NAICS Code: 336413 Subject: MOTOR-PUMP,HYDRAU Solicitation Number: SPRRA127RA008 Set Aside Code: N/A Description: No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA-AHAA, Jessica Coleman, Contract Specialist, via e-mail: jessica.coleman@dla.mil. For request for solicitation, provide your name, the company name and Cage Code and a telephone number. PRON: W58H0Z0098743768. The Government proposes to acquire on a Firm Fixed Price contract a quantity of 140 each of a MOTOR-PUMP,HYDRAULI; NSN: 1650-01-119-7429; Part Number: 145HS520-6 applicable to the CHINOOK. Production Lead Time (PLT) without First Article Testing is 140 each, 540 Days After Contract Award (DACA) with deliveries to TINKER AFB, OK, 73145-8000. This item is restricted to the following: THE BOEING COMPANY, CAGE CODE: 77272 BOEING DISTRIBUTION SERVICES, INC., CAGE CODE: 2V484 EATON AEROSPACE LLC, CAGE CODE: 62983 JAMAICA BEARINGS CO INC, CAGE CODE: 04836 The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to compete for future solicitations by visiting AvMC's public website: https://amrdec.army.afpims.mil/Directorates/STI/ All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies.

Closes Nov 20, 2026 · 4:30 PM
Read more →

SPRRA127RA007, PUMP, AXIAL PISTONS

Department of Defense · DLA Aviation AT Huntsville, AL  |  0, Oklahoma  |  Posted Nov 5, 2026
Transportation & vehiclesPresolicitationNo Set aside used

Class Code: 16 NAICS Code: 336413 Subject: PUMP,AXIAL PISTONS Solicitation Number: SPRRA127RA007 Set Aside Code: N/A Description: No telephone requests will be accepted. Direct your requests and communication to: ATTN: DLA-AHBA, Jessica Coleman, Contract Specialist, via e-mail: jessica.coleman@dla.mil. For request for solicitation, provide your name, the company name and Cage Code and a telephone number. PRON: W58H0Z0098627643. The Government proposes to acquire on a Firm Fixed Price contract a quantity of 100 each of a PUMP,AXIAL PISTONS; NSN: 1650-01-516-6740; Part Number: 145HS100-5 applicable to the CHINOOK. Production Lead Time (PLT) without First Article Testing is 100 each, 1290 Days After Contract Award (DACA) with deliveries to TINKER AFB, OK, 73145-8000. This item is restricted to the following: THE BOEING COMPANY, CAGE CODE: 77272 BOEING DISTRIBUTION SERVICES, INC., CAGE CODE: 2V484 EATON AEROSPACE LLC, CAGE CODE: 62983 JAMAICA BEARINGS CO INC, CAGE CODE: 04836 The rights to use the data needed to purchase this part from additional source(s) are not owned by the Government and cannot be purchased, developed, or otherwise obtained. It is uneconomical to reverse engineer this part. All offerors must meet prequalification requirements in order to be eligible for award. Firms that recognize and can produce the required item described above are encouraged to identify themselves. Firms are encouraged to seek source approval in order to compete for future solicitations by visiting AvMC's public website: https://amrdec.army.afpims.mil/Directorates/STI/ All responsible sources may submit an offer, which shall be considered by the Agency. The closing date annotated is an estimated date and may be adjusted dependent upon the date of release for solicitation; however, the solicitation will not close prior to the date stated above. Foreign Firms are reminded that all requests for solicitation must be processed through their respective embassies.

Closes Nov 20, 2026 · 4:30 PM
Read more →

AIR SPRING,VEHICULAR

Department of Defense · DLA Weapons Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesCombined Synopsis/SolicitationSmall Business Set Aside - Total

Proposed procurement for NSN 2510015585413 AIR SPRING,VEHICULAR: Line 0001 Qty 296 UI EA Deliver To: By: 0089 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 44. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 74410 90557205. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Closes Nov 20, 2026
Read more →

SHACKLE,LEAF SPRING AS

Department of Defense · DLA Weapons Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesCombined Synopsis/SolicitationSmall Business Set Aside - Total

Proposed procurement for NSN 2510015773282 SHACKLE,LEAF SPRING AS: Line 0001 Qty 27 UI EA Deliver To: By: 0089 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 4. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 64678 16-11890-001. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Closes Nov 20, 2026
Read more →

Parker Hannifin Sole Source Adds to LTC

Department of Defense · DLA Aviation  |  Richmond, Virginia  |  Posted Nov 5, 2026
Transportation & vehiclesPresolicitation

Defense Logistics Agency (DLA) Aviation, Richmond proposes to issue a Letter Request for Proposal (RFP) to support a DLA Strategic Initiative. This strategic effort includes multiple NSNs to support various sole source weapon systems / operational platforms. A total of 153 NSNs for various platforms / weapon systems are targeted for this RFP and contract action. OEM Parker Hannifin Corporation (59211) has been identified as the approved source of supply for the listed items; therefore, the proposed action is intended to be awarded on a sole source basis to the OEM. It is anticipated that 153 items will be awarded and priced with lead-times as add-ons to the OEM's existing Long-Term Contracts (LTCs): Captains of Industry (COI) Supplier Capabilities Contract (SCC) SPE4AX-21-D-9402 for commercial items and SPE4AX-21-D-9403 for military unique items. It is the Government's intent to use a letter solicitation format to the sole source Original Equipment Manufacturer (OEM); therefore, if a non-OEM source is interested in any of the NSNs, please notify the Contracting Officer prior to the synopsis closing date. These items have been identified as sole source; however, some items may have history showing awards to other than the OEM. Surplus dealers are also invited to respond to this synopsis. The response should include a completed surplus certificate, DLA Procurement Note C04, Government Surplus Property Material or adequate traceability documentation to show that the product is acceptable. (Note: DLA Procurement Note M05 Evaluation Factor for Unused Former Government Surplus Property, will apply and other Aviation sites will provide their equivalent surplus documentation, as applicable). Responses to this announcement from other than the OEM should identify items of interest and include evidence of ability to supply the items in accordance with the aforementioned acquisition strategy. In addition, respondents should identify the available quantities, prices, and lead-times. DLA will consider all such responses and may alter the acquisition strategy if purchase of existing surplus or newly manufactured inventory is in the best interest of the government. Responses to this announcement from other than the OEM are required by Thursday, November 19, 2026. A copy of the letter of interest should be forwarded to the contracting officer identified herein and SBA PCR (jamal.thomas@sba.gov). If your company desires to be reviewed and qualified as an "Approved Source" for any of the items listed, submit an application package through the Source Approval Request (SAR) Program as outlined in the attached SAR document. A SAR package contains all of the technical data needed to demonstrate that the prospective contractor can competently manufacture the product to the same level of quality, or better, than the Original Equipment Manufacturer (OEM). The onus is on the contractor to document and demonstrate their product is equal to, or better, than the currently approved item which DLA Aviation is procuring. (Note: To submit your SAR please send an email to: DLA-WS-OSBP@dla.mil, subject� request a SAR drop off�. After we receive your email request a �request for drop off� will be returned, where you can download your file. Include CAGE code, the NSN, and the email address where you want to receive the link. Current procurements will not be held pending review; therefore, any action will be for future procurements or strategic efforts. Export Control: Items cited require data which is restricted to contractors certified by DoD to access unclassified data per DoD 5220.22M. Certification is obtained by submitting DD Form 2345, Military Critical Technical Data Agreement, to the Defense Logistics Information Services. Additionally, letters expressing interest in subcontracting provided to the Contracting Officer will be forwarded to the identified Original Equipment Manufacturer (OEM). FAR Parts 12/15 procedures may apply. The attached 153 NSNs have been identified for the current procurement. If other NSNs are subsequently added, as defined by this strategic initiative and contract terms, they will be synopsized separately. The anticipated closing date is Friday, February 19, 2026. If you are interested in this opportunity, you may contact Kenya Allamby at kenya.allamby@dla.mil.

Closes Nov 20, 2026 · 3:00 PM ET
Read more →

N0038327QF053

Department of Defense · Navsup Weapon Systems Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesPresolicitationNo Set aside used

NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia intends to solicit on a sole source basis with Lockheed Martin Corp. for the repair of the following:\\ PN: 6120-0500-001\ NSN: 7R1680015728130\ QTY: 2\\ The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 3204(a)(1) as supplemented by FAR 6.302.\\ Source Approval Statement applies to NSN(s). These item(s) are being synopsized as a sole source repair to Sikorsky, as the Agency anticipates receiving a single acceptable offer from this source. It is expected that award will be issued under the existing Basic Ordering Agreement (BOA) N00383-26-G-AB01. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed waiting for a SAR approval.\\ The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies.\\ This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive repair.\\ This spare is not a Total Small Business Set-Aside.\\ Electronic procedures will be used for this solicitation and will be posted to NECO.\\ No telephone requests will be honored and no hard copies will be mailed out.\\ Interested organizations may submit their capabilities and qualifications to perform the effort by email at Samantha.m.freedman.civ@us.navy.mil.\\

Closes Nov 20, 2026 · 2:00 AM ET
Read more →

N0038327QF051

Department of Defense · Navsup Weapon Systems Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesPresolicitationNo Set aside used

NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia intends to solicit on a sole source basis with Sikorsky for the repair of the following:\\ PN: 70351-38100-051\ NSN: 7R1615015348106\ QTY: 1\\ The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 3204(a)(1) as supplemented by FAR 6.302.\\ Source Approval Statement applies to NSN(s). These item(s) are being synopsized as a sole source repair to Sikorsky, as the Agency anticipates receiving a single acceptable offer from this source. It is expected that award will be issued under the existing Basic Ordering Agreement (BOA) N00383-22-G-Y601. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed waiting for a SAR approval.\\ The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies.\\ This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive repair.\\ This spare is not a Total Small Business Set-Aside.\\ Electronic procedures will be used for this solicitation and will be posted to NECO.\\ No telephone requests will be honored and no hard copies will be mailed out.\\ Interested organizations may submit their capabilities and qualifications to perform the effort by email at Samantha.m.freedman.civ@us.navy.mil.\\

Closes Nov 20, 2026 · 2:00 PM ET
Read more →

N0038327QF050

Department of Defense · Navsup Weapon Systems Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesPresolicitationNo Set aside used

NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia intends to solicit on a sole source basis with Sikorsky for the repair of the following:\\ PN: 70361-23001-048\ NSN: 7R1615012429604\ QTY: 1\\ The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 3204(a)(1) as supplemented by FAR 6.302.\\ Source Approval Statement applies to NSN(s). These item(s) are being synopsized as a sole source repair to Sikorsky, as the Agency anticipates receiving a single acceptable offer from this source. It is expected that award will be issued under the existing Basic Ordering Agreement (BOA) N00383-22-G-Y601. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed waiting for a SAR approval.\\ The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies.\\ This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive repair.\\ This spare is not a Total Small Business Set-Aside.\\ Electronic procedures will be used for this solicitation and will be posted to NECO.\\ No telephone requests will be honored and no hard copies will be mailed out.\\ Interested organizations may submit their capabilities and qualifications to perform the effort by email at Samantha.m.freedman.civ@us.navy.mil.\\

Closes Nov 20, 2026 · 2:00 PM ET
Read more →

V-22 Flight Control System - Enhanced Capability

Department of Defense · Naval AIR Systems Command  |  Amarillo, Texas  |  Posted Nov 5, 2026
Transportation & vehiclesCombined Synopsis/SolicitationNo Set aside used

The Naval Air Systems Command (NAVAIR), V-22 Joint Program Office (PMA-275) intends to negotiate and issue a delivery order under a Basic Ordering Agreement to the Bell Boeing Joint Program Office, 401 Tiltrotor Drive, Amarillo, TX 79111 on a sole-source basis for: The V-22 FCS Enhanced Capability will include the following safety and capability-driven technology improvements to the aircraft: Level I handling qualities in critical mission tasks, tactile cueing of aircraft operating limits, and Hands-On Throttle and Stick (HOTAS) control of FCS modes. This action is being awarded on a sole source basis to the Bell Boeing Joint Program Office in accordance with the statutory authority permitting other than full and open competition under Title 10 U.S.C. 2304(c)(1), as implemented by FAR Part 6.302-1, "Only one responsible source and no other supplies or services will satisfy agency requirements." Bell Boeing is the sole designer, developer, and producer of the V-22 Tiltrotor aircraft and is the only known source that possesses the requisite knowledge and expertise required to perform this effort. Also, Bell Boeing is the only source that possesses the totality of engineering and technical data required to perform these efforts. The proposed contract action is for supplies or services for which the Government intends to solicit and negotiate with only one source under authority of FAR 6.302. Interested persons may identify their interest and capability to respond to the requirement. This notice of intent is not a request for competitive proposals. However, any capability statements received within fifteen days after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. For possible subcontracting opportunities, please contact Jen McKeon at jennifer.m.mckeon@boeing.com or Shari Askew at supplierdiversity@bh.com

Closes Nov 20, 2026 · 12:00 AM ET
Read more →

AFIT/ENG-Cleanroom DI-RO Type I Ultra-Pure Water System

Department of Defense · FA8601 Aflcmc PZIO  |  Wright Patterson Afb, Ohio  |  Posted Nov 5, 2026
Transportation & vehiclesSources SoughtNo Set aside used

Notice from the United States Air Force, Air Force Life Cycle Management Center (AFLCMC), Installation Contracting Division, Base Support Contracting Branch at Wright-Patterson Air Force Base (WPAFB), Ohio: INTRODUCTION: The AFLCMC Operational Contracting Branch at Wright-Patterson AFB, Ohio, on behalf of the Air Force Institute of Technology (AFIT), is conducting market research through a Sources Sought Notice to identify potential sources, including Small Businesses (SB), capable of providing AFIT/ENG-Cleanroom DI-RO Type I Ultra-Pure Water System. This notice is to determine the availability of qualified sources to support this requirement. A set-aside decision has not yet been made for this acquisition. REQUIREMENTS: The Government requires a contractor to provide all personnel, equipment, tools, materials, supervision, and other items and services necessary to perform he preventative maintenance, service and repair of the DI-RO type I water System for AFIT, Wright-Patterson Air Force Base, Ohio. The requirements are listed in the attached Performance Work Statement. SUBMISSION DETAILS: Interested parties are requested to submit a capability package that provides clear and convincing evidence of their ability to provide the services outlined above. In addition, interested parties must provide the following information: Company Name, Address, CAGE Code, and Unique Entity ID (UEI). Point of Contact (Name, Phone Number, and Email Address). Company/Business size status under a relevant NAICS code 488390. Prospective contractors must be registered in the System for Award Management (SAM) database at https://www.sam.gov to be eligible for a Department of Defense contract award. CLOSING: Responses to this Sources Sought notice must be submitted via email no later than November 23, 2026, at 11:00am Eastern Time. All correspondence sent via email must contain the subject line: �FA860127Q0027, Sources Sought: AFIT/ENG-Cleanroom DI-RO Type I Ultra-Pure Water System�. Be advised that due to network filters, attachments ending in .zip or .exe are not allowable and will be deleted. The points of contact for this action are Brian Algeo, Contract Specialist, at brian.algeo.1@us.af.mil, and Candice Snow, Contracting Officer, at candice.snow@us.af.mil. Cybersecurity Maturity Model Certification: In accordance with R-DFARS 252.204-7021 and R-DFARS 252.204-7025, a CMMC Level 1 assessment is a mandatory requirement for all offerors bidding with the Department of War. Under CMMC Level 1, all offerors must demonstrate full compliance by self-certifying with the 15 basic safeguarding requirements for Federal Contract Information (FCI) outlined in RFO 52.240-93(b)(1). Once your organization has confirmed its compliance with these 15 requirements, you must enter this self-certification into the Supplier Performance Risk System (SPRS) module within PIEE (https://piee.eb.mil). This serves as the official record of your certification for the Government. Contract award cannot be made to any offeror that is not fully compliant and whose assessment results are not properly recorded in the system of record.� This is a Sources Sought notice for market research purposes only. In accordance with Revolutionary FAR Overall (RFO) 15.101, responses to this notice are not considered offers and cannot be accepted by the Government to form a binding contract. Any information submitted by respondents to this notice is strictly voluntary and will not be reimbursed by the Government. The Government�s assessment of the capability statements received will factor into whether any forthcoming solicitation will be conducted as a full and open competition or as a set-aside. Attachments: Instructions Performance Work Statement

Closes Nov 23, 2026 · 11:00 AM ET
Read more →

NAWCAD HX-21 CH-53K ORGANIZATIONAL LEVEL CONTRACTOR MAINTENANCE SUPPORT (CMS)

Department of Defense · Naval AIR Warfare Center AIR DIV  |  Patuxent River, Maryland  |  Posted Nov 5, 2026
Transportation & vehiclesSources SoughtSmall Business Set Aside - Total

1.0 INTRODUCTION a. The Naval Air Warfare Center Aircraft Division (NAWCAD), Naval Test Wing Atlantic (NTWL), Air Test and Evaluation Squadron TWO ONE (HX-21), Patuxent River, MD, has a follow-on requirement for Contractor Maintenance Support (CMS) Services to perform Organizational Level (O-Level) maintenance support services on assigned CH-53K test aircraft. This Market Research tool is being used to identify potential and eligible firms, of all sizes, prior to determining the method of acquisition and issuance of a solicitation. The results of the Sources Sought will be utilized to determine if any Small Business Set[1]Aside opportunities exist. Additionally, this Sources Sought is being used to gather constructive information from industry to improve the Request for Proposal (RFP). This is for the NAWCAD HX-21 CH-53K O-LEVEL CMS. This is a follow-on requirement. The current contract information can be found in Section 3.0, paragraph b below. There have been significant changes to the scope as follows: estimated on-site personnel increasing from 62 FTEs to 75 FTEs. This is not subject to bundling or consolidation. b. The following documents are attached to this Sources Sought Notice: Draft Performance Work Statement (PWS) Draft Labor Categories and Staffing Matrix Draft Personnel Qualifications c. The following dates are anticipated time frames associated with this requirement: Estimated Draft RFP Release: 01 May 2027 Estimated Final RFP Release: 01 Aug 2027 Estimated Award Date: 01 May 2028 Period of Performance: 19 Aug 2028 � 18 Aug 2033 d. Primary Work Location/Place of Performance: Primary Work Location is detailed in Attachment 1, Draft PWS. 2.0 DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. 3.0 ANTICIPATED CONTRACT TYPE AND CONTRACT/PROGRAM BACKGROUND a. Anticipated Contract Type: C-Type Contract with Firm Fixed Price (FFP) CLINs for Labor and Cost Reimbursable CLINs for associated Other Direct Costs (ODCs). The Government is anticipating an additional Cost Reimbursable Performance Incentive CLIN. The anticipated Period of Performance includes one base period of 12 months with four one[1]year option periods for a total potential performance period of 5 years. b. The incumbent contract information is as follows: Incumbent Contractor: Adams Communication & Engineering Technology, Inc. Contract Number: N68520-20-D-0032 / N00421-23-F-0619 Contract End Date: 13 Aug 2028 Contract Type: FFP Previous Set-Aside Designation: Veteran-Owned Small Business (VOSB) Number of FTEs on the Contract: 62 FTEs c. Program Background: HX-21 has a follow-on requirement for CMS Services to perform O-Level (to include limited Intermediate Level (I-Level) and Depot Level (D[1]Level)) maintenance support services and other explicit test support tasks required to maintain assigned CH-53K aircraft to the proper standards required to meet the requirements of the HX-21 test schedule. The test schedule includes both flight and ground test events to meet the PMA-261 and other requirement owner program performance needs. The limited I-Level and D-Level work is contingent, provided skilled artisans and required tools are available and authorization is received from the cognizant authority. Services include aircraft maintenance and logistics support on aircraft, aircraft systems, and Support Equipment (SE) for which HX-21 has cognizant responsibility. Additional services include maintenance of prototype aircraft components, configuration and installation of internal/external ballast, and Helicopter Support Team (HST) duties, i.e. external sling load operations. The majority of work performance will be accomplished at Patuxent River, Maryland. Additional temporary work sites in direct support of projects are executed as detachments and include (but are not limited to) United States Naval Vessels, Department of War Installations, and Commercial Facilities which also encompass unscheduled emergent type maintenance support. A more detailed description is provided in Attachment 1, Draft PWS. 4.0 SPECIAL REQUIREMENTS AND REQUIRED CAPABILITES Any anticipated special requirements and required capabilities are detailed in Attachment 1, Draft PWS. This document details security clearance requirements for personnel, facility requirements, and any specific certifications that are required for the performance of this requirement. 5.0 ELIGIBILITY a. The applicable NAICS code for this requirement is 488190, Other Support Activities for Air Transportation, with a Small Business Size Standard of $40.0M. b. The Product Service Code is J015, Maintenance, Repair, and Rebuilding of Equipment: Aircraft and Airframe Structural Components. c. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Note: FAR 52.219-14 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count �first tier subcontracted� work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2020-O0008 dated 04/03/20 at https://www.acquisition.gov/browse/index/far). To assist in our market research and determination of any applicable small business set-aside for this effort, if you are a small business interested in priming this effort and plan to utilize �similarly situated entities� to meet the Limitations on Subcontracting, please identify the name & CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned similarly situated entity should be included in answering any questions outlined in the Sources Sought Notice (SSN) in order to assist the Government�s capability determination. 6.0 SUBMISSION REQUIREMENTS a. Interested parties should address the following questions in their response. The responses to these questions will aid the Government in determining whether a company is capable in performing the requirement, so it is important to address these areas with specific details. Organizational-Level Maintenance on Navy/Marine Corps Rotary Wing Aircraft. List all type/model rotary wing aircraft supported and total number of each within the past five years. Place emphasis on any modern fly-by-wire aircraft. Support ground and flight operations to include launch/recovery of rotary wing aircraft and hot pressure refueling. Describe all experience with ground and flight operations to include launch/recovery of rotary wing aircraft and hot pressure refueling. List all type/model aircraft and locations / supported organization. Safe for Flight (SFF) experience. The Contractor will be required to undergo a NAVAIR-led SFF Certification Inspection prior to commencing maintenance activities. Describe all experience with U.S. Navy SFF certification or similar experience. List all type/model aircraft and locations/supported organization. Cargo Capabilities. The CH-53K aircraft will regularly be reconfigured with internal cargo/ballast configurations and conduct external cargo loading using Helicopter Support Team procedures. State any experience with loading / rigging of internal and external slung cargo. Maintenance Training. State any experience with training a maintenance workforce on a new aircraft. List all type/model aircraft and locations / supported organization. Offsite Detachment Work. List all locations where work was performed while temporarily operating away from the primary work facility (within the last three years), to include shipboard operations on US Navy vessels. Recruitment Strategies. There is a limited community of CH-53K experienced maintenance personnel due to recent fleet fielding. List any experience with recruiting uniquely experienced personnel for �hard to fill� positions. Performance Incentives. State any experience with providing additional non-discretionary wages to SCA Labor hourly employees as a result of awarded performance incentives. Please note that under a Small-Business Set-Aside, in accordance with FAR 52.219-14, the small business prime must perform at least 50% of the work themselves in terms of the cost of performance. Provide an explanation of your company�s ability to perform at least 50% of the tasking described in this PBSOW for the base period as well as the option periods. Similarly situated small businesses may team together to meet the 50% requirement. If your company is planning to team with a similarly situated small business, the response must clearly identify the proposed team members and the capability statement must clearly articulate which portion of the work each team member will be responsible for. The response must be detailed enough for the Government to make a determination whether or not the proposed team will be able to perform 50% of the work when combined. Provide a statement including current small/large business status and company profile to include number of employees, annual revenue history, office locations, Unique Entity Identifier (UIE) number, etc. Respondents to this notice also must indicate whether they qualify as a Small, Small Disadvantaged, Women-Owned, HUBZone, or Service Disabled Veteran-Owned Small Business Concern under the NAICS code identified for this requirement. b. In addition to the above, the Government is requesting feedback on the draft PWS, draft labor categories and staffing matrix, and draft estimated labor rates by labor category. If there is any feedback on any of these documents, please include that within the capabilities statement submission. Specific details are requested to help in supporting the feedback. This feedback DOES NOT count against the page limitations for the capabilities statement and should be submitted as a separate file at the same time as the capabilities statement submission. The Government may or may not reach back out to the companies to discuss the feedback in depth. c. Interested parties shall adhere to the following instructions for the submittal of their capabilities statements. Page Limit and Format: Ten (10) 8.5 X 11 inch pages in Times New Roman font of not less than 10 point. Document Type: Microsoft Word, Adobe PDF, etc. Delivery: Electronic-mail (Email) Submission to the Contract Specialist, Kelly Abrams at kelly.l.abrams.civ@us.navy.mil Response date: Responses are due by 2:00PM EDT on 25 NOV 2026. No classified information shall be submitted in response to this Sources Sought. No phone calls will be accepted. All questions must be submitted via email to the Contract Specialist, Kelly Abrams at kelly.l.abrams.civ@us.navy.mil. All responses shall include Sources Sought Notice name/number, Company Name, Company Address, Company Business Size, and Points of Contact (POC), including names, phone numbers, and email addresses. All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government. Any information or materials provided in response to this Sources Sought Notice will not be returned. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice.

Closes Nov 25, 2026 · 2:00 PM ET
Read more →

V--USWFS Exclusive Use Smokejumper Aircraft Dash 8

Dept. of the Interior · IBC ACQ SVCS Directorate (00004)  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesCombined Synopsis/SolicitationSmall Business Set Aside - Total

USWFS Exclusive Use Smokejumper Dash 8 Aircraft, Ft. Wainwright, AK and Boise, Idaho

Closes Dec 2, 2026 · 2:00 PM
Read more →

LATCH ASSEMBLY,AIRC

Department of Defense · Navsup Weapon Systems Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesSolicitation

CONTACT INFORMATION|4|N763.14|TBD|215-697-4002|JULIANNA.FIANDRA@NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|TBD||TBD|TBD|TBD|TBD|SEE SCHEDULE|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|PHILADELPHIA| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| This RFQ is for a Repair and will be using competitive procedures. NAVSUP WSS requests that contractors submit a quote that includes either afirm-fixed price or TT&E pricing as well as estimate costs to repair thisitem. This requirement will be awarded to the offeror with the lowest pricetechnically acceptable (LPTA) quote. Can only be procured only from suppliers who provide FAA-Certified parts which possess a FAA Authorized Release Certificate, FAA Form 8130-3 Airworthy Approval Tag. Quotes may be emailed to the email address below and must be received onor before on the closing date listed on page 1 of the solicitation. Julianna.m.fiandra.civ@us.navy.mil This contract/delivery order/purchase order/modification is issued by theGovernment when deposited in the mail, transmitted by facsimile or sent by any electronic commerce method, including email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to issue this contract/delivery order/purchase order/modification. 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 1.2 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;HARTWELL CORPORATION; drawing number ( ;83014; ) ;149A6130-1; , Revision ;Latest; and all details and specifications referenced therein. 1.3 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.4 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item. It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition. 3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order. The term "contract" encompasses a contract, an order, or a project work order. 3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled). 3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired). 3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to to return the following items to a Ready For Issue (RFI) condition: LATCH ASSEMBLY,AIRC ;149A6130-1; P/N, ;7RH 1680 016099170 P8; NSN, ;Available repair manuals, drawings and specifications per p/n requirements; Tech Publications 3.3.3 RFI is defined as that condition allowing the items to perform properly and reliably in an operational environment in a manner they were intended to operate.The contractor must perform all repairs/upgrades at the facility identified within this SOW. Repairs performed by the contractor or subcontractor shall be performed in accordance with the specified drawings and repair manual(s). 3.4 Changes to such manuals used for repairs under this contract, or changes to drawings or specifications used in the manufacture of parts utilized in these repairs, require Procuring Contracting Officer (PCO) approval in accordance with the Configuration Management provisions of this Statement of Work or contract. Under no circumstances should the repair, test, and inspection extend beyond the requirements of this paragraph unless authorized by the Government QAR.In addition, requests for approval of changes to a repair source or repair facility shall be submitted in writing to the PCO prior to making any such change. 3.4.1 Any repairs performed using unapproved changes to such manuals, drawings, specifications, or changes to repair source or facility are done at the contractor's own risk. If the Government disapproves the requested change, the contractor shall replace any delivered items repaired using such unapproved manuals,drawing, specification, repair source or repair facility change. The contractor is not entitled to any equitable adjustment to the contract price or terms based on the Government's disapproval of a requested change to manuals, drawings, specifications, or to a repair source or facility. 3.4.2 References on Drawings and Specifications:For repair and overhaul purposes only. All references to the "prime contractor" or the "actual manufacturer" appearing on the drawings and / or specifications or technical data furnished by the Government shall be read as the "Government Designated Agency" 3.4.3 Process Control Documentation: The contractor shall prepare and maintain repair procedures, and test / inspection information / procedures which shall be made available to the Government for review and approval. The procedures shall include sequential diagrams of processes, as well as the performance specifications to perform the testing / inspection procedures. Those processes shall be frozen after approval of the inspection / Test. 3.4.4 Beyond Economical Repair (BER). An item is BER if the cost of the repair exceeds 75% of the production quantity price to replace the item, current at time of award. This replacement price is for the purposes of BER determinations only, and may not be used or relied on by the offeror in the pricing of the repairs required by this contract. Items determined BER are not included in the contract price. The contractor shall obtain written concurrence from DCMA for all units determined by the contractor to be BER. All such determinations, including the basis for the determination, the repair required, the proposed price to repair and the DCMA written concurrence shall be provided by the contractor to the PCO, with a copy to the inventory manager. After receipt of the required documentation, the PCO shall provide the contractor disposition instructions or contractual authority for repair of the item. The contractor is not authorized to proceed with the repair until notification to proceed is received from the PCO. Any disposal ordered shall be performed by the contractor in accordance with all applicable regulations and in accordance with all DCMA disposal procedures and requirements. 3.4.5 Missing on Induction (MOI). A Weapons Repairable Assembly (WRA) is subject to this MOI provision if the item received by the contractor for repair is missing one or more Shop Replaceable Assemblies (SRAs). Contractor replacement of MOI SRAs is not included in the contract price. The contractor shall immediately notify DCMA when an item is received with MOI SRA(s) and shall obtain written verification from DCMA for all WRAs determined to have MOI SRA(s). The contractor shall provide all such determinations, including identification of the missing SRA(s), and the DCMA written verification, to the Inventory Manager with a copy to the PCO and ACO prior to induction and/or repair of the WRA. The contractor shall not induct and/or repair WRAs with MOI SRAs until instructions on how to proceed are provided to the contractor by the Inventory Manager (where no adjustment price to the contract is required) or by the PCO. Items received by the contractor missing consumable parts are not MOI items. Rather, repair of such items and replacement of the missing consumable parts are included in the contract price and the item shall be inducted and repaired by the contractor under this contract. 3.4.6 Replacing Failed or Missing Shop Replaceable Assembly (SRA) when repairinga Weapons Replaceable Assembly (WRA). 3.4.7 A. When the contractor believes one or more SRA(s) within a WRA are either: 3.4.8 Beyond Economic Repair (BER) or Beyond Repair (BR) i. e. the unit is not capable of being repaired because of the extent of physical damage), or Missing on Induction (MOI), the contractor shall obtain written verification from DCMA and advice from the Inventory Manager whether a SRA may be replaced by one or more of the following options: Ship in place from an existing spares or repair contract, if any, MILSTRIP the SRA(s), otherwise be provided direction for obtaining the SRA(s) at no cost to the contractor.The detailed procedures are set forth in Section 6.0 of the WEB-BASED COMMERCIAL ASSET VISIBILITY (CAV) STATEMENT OF WORK. 3.4.9 B.When not otherwise provided for (or precluded) by other terms of this contract, the contractor may seek written authorization to replace failed SRA(s) with Ready For Issue SRA(s). When authorized, the procedures set forth in paragraph 3.0 of Section 6.2 of the WEB-BASED COMMERCIAL ASSET VISIBILITY (CAV) STATEMENT OF WORK shall be followed. 3.4.10 Over and Above Repair (OAR). An item sent to the contractor shall be considered to require over and above (OAR) repair effort if the repair required is not the type of repair that would be anticipated as a result of normal Navy operation of the item and is not included in the contract pricing due to the nature or scope of the repair needed for that particular item. Therefore, repair of OAR items may be subject to equitable adjustment. The Contractor shall obtain written concurrence from DCMA for all units determined by the contractor to require OAR effort. All such OAR determinations, including the basis for the determination, the repair required, the proposed price to repair and the DCMA written concurrence, shall be provided by the contractor to the PCO prior to undertaking repair of the item. After receipt of the required documentation, the PCO shall provide the contractor disposition instructions or contractual authority for repair of the item. Any ordered disposal shall be performed by the contractor in accordance with all applicable regulations and DCMA disposal procedures and requirements. 3.5 4.0 PARTS AND MATERIALS 3.5.1 General. The contractor is responsible for supplying all parts and material necessary to perform the required repairs under this contract unless parts or material are specifically identified as Government Furnished Material (GFM). All parts and material used in performance of this contract shall be in accordance with the latest approved revision of applicable drawings and specifications and shall be new in accordance with FAR 52.211-5, Material Requirements, which is incorporated by reference herein. Authorization to use other than new material as defined by FAR 52.211-5 requires written approval from the PCO. In addition, cannibalization must be approved by the PCO. Cannibalization of units that have not been inducted is not typically authorized and requires specific approval by the PCO. 3.5.2 The contractor shall ensure it has access for the duration of this contract to updated drawings and specifications for parts and material required for repairs performed under this contract. Any change to such parts/material drawings or specifications requires Government approval in accordance with the Configuration Management provisions of this Statement of Work. Written approval from the PCO must be obtained prior to any change to the manufacturing source or manufacturing facility for all parts which require source approval, unless the contractor is the Design Control Agent (DCA) (i.e. the entity responsible for maintaining the latest configuration data) for the the contract item. If the contractor is the DCA, the contractor may approve approve changes to manufacturing source or manufacturing facility for all parts, including those which require source approval. Any repairs performed using unapproved changes to such drawings, specifications or manufacturing source or facility are done at the contractor's own risk. If the Government disapproves the requested change, the contractor shall replace any delivered items repaired using such unapproved change. The contractor is not entitled to any equitable adjustment to the contract price or terms based on the Government's disapproval of a requested change to the drawings, specifications or manufacturing source or facility. 3.5.3 Purchased Material Control and Parts Control. The contractor shall establish and maintain a system of control over purchased parts and material. Such controls shall, at a minimum, assure that the parts and and material purchased are in compliance with the requirements of this contract. 3.5.4 Receiving Inspection of Purchased Parts and Material. (1)Purchased items shall be inspected upon receipt at the contractor's facility to assure conformance with all requirements of the applicable drawings and specifications or (2)the contractor shall provide prior to the contract award evidence for Government review and approval of a purchased parts and material system which provides for the inspections to assure conformance with all requirements of the applicable drawings and specifications. Evidence of such inspections of such inspections shall be maintained by the contractor or subcontractor for Government review.The inspection report shall, at a minimum, include a record of all dimensional data (coordinate/positional), material, finish, and process with appropriate pass/fail criteria such as certifications and actual dimensonal readings. 3.5.5 ^^^NOTE^^^PART CANNIBALIZATION IS NOT AUTHORIZED UNLESS SPECIFICALLY APPROVED BY NAVSUP WSS AND THE BDE. 3.5.6 3.6 SOURCE AND LOCATION OF REPAIR SOURCE: 3.6.1 The contractor shall specify the name of the Source/Division performing the work and the actual location where work will be performed. LATCH ASSEMBLY,AIRC ;THE BOEING COMPANY; Company Name , ;MAIL STOP 45-24 P O BOX 3707; SEATTLE, WA 98124-2207; Address , ;81205; Cage Code inspection will be accomplished on the contractor's equipment 3.7 5.0 CONTRACTOR QUALITY REQUIREMENTS: 3.7.1 Quality Program. The Contractor shall establish, implement, document and maintain a quality system that ensures conformance to all applicable requirements of ISO 9001/ SAE AS9100. The Contractor's quality management system/program shall be designed to promptly detect, correct and prevent conditions that adversely affect quality. 3.7.2 Calibration System Requirements. Contractor shall maintain a calibration system that meets the requirements of ANSI/NCSL Z540.3, ISO-10012-1 or an equivalent calibration program acceptable to the Government. 3.8 6.0 CONFIGURATION MANAGEMENT (CM): 3.8.1 The contractor shall maintain a configuration management plan in accordance with the provisions of NAVSUP WSS configuration management clause NAVICPIA18. (Refer to contract). 3.9 7.0 MARKINGS. 3.9.1 Marking shall be as indicated in the contract when applicable. 3.10 8.0 STORAGE; 3.10.1 The contractor shall provide a proper enclosed warehouse environment for both material items awaiting repair and assets which have been repaired and are awaiting shipment to ensure the items are not damaged while being stored. 4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE

Closes Dec 4, 2026 · 4:30 PM ET
Read more →

LATCH ASSEMBLY,AIRC

Department of Defense · Navsup Weapon Systems Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesSolicitation

CONTACT INFORMATION|4|N763.14|TBD|215-697-4002|JULIANNA.FIANDRA@NAVY.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|TBD||TBD|TBD|TBD|TBD|SEE SCHEDULE|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|PHILADELPHIA| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| THIS SOLICITATION IS HEREBY EXTENDED TO 04 DEC 2026. This RFQ is for a Repair and will be using competitive procedures. NAVSUP WSS requests that contractors submit a quote that includes either afirm-fixed price or TT&E pricing as well as estimate costs to repair thisitem. This requirement will be awarded to the offeror with the lowest pricetechnically acceptable (LPTA) quote. Can only be procured only from suppliers who provide FAA-Certified parts which possess a FAA Authorized Release Certificate, FAA Form 8130-3 Airworthy Approval Tag. Quotes may be emailed to the email address below and must be received onor before on the closing date listed on page 1 of the solicitation. Julianna.m.fiandra.civ@us.navy.mil This contract/delivery order/purchase order/modification is issued by theGovernment when deposited in the mail, transmitted by facsimile or sent by any electronic commerce method, including email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to issue this contract/delivery order/purchase order/modification. 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 1.2 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;HARTWELL CORPORATION; drawing number ( ;83014; ) ;149A6130-1; , Revision ;Latest; and all details and specifications referenced therein. 1.3 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.4 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item. It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition. 3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order. The term "contract" encompasses a contract, an order, or a project work order. 3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled). 3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired). 3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to to return the following items to a Ready For Issue (RFI) condition: LATCH ASSEMBLY,AIRC ;149A6130-1; P/N, ;7RH 1680 016099170 P8; NSN, ;Available repair manuals, drawings and specifications per p/n requirements; Tech Publications 3.3.3 RFI is defined as that condition allowing the items to perform properly and reliably in an operational environment in a manner they were intended to operate.The contractor must perform all repairs/upgrades at the facility identified within this SOW. Repairs performed by the contractor or subcontractor shall be performed in accordance with the specified drawings and repair manual(s). 3.4 Changes to such manuals used for repairs under this contract, or changes to drawings or specifications used in the manufacture of parts utilized in these repairs, require Procuring Contracting Officer (PCO) approval in accordance with the Configuration Management provisions of this Statement of Work or contract. Under no circumstances should the repair, test, and inspection extend beyond the requirements of this paragraph unless authorized by the Government QAR.In addition, requests for approval of changes to a repair source or repair facility shall be submitted in writing to the PCO prior to making any such change. 3.4.1 Any repairs performed using unapproved changes to such manuals, drawings, specifications, or changes to repair source or facility are done at the contractor's own risk. If the Government disapproves the requested change, the contractor shall replace any delivered items repaired using such unapproved manuals,drawing, specification, repair source or repair facility change. The contractor is not entitled to any equitable adjustment to the contract price or terms based on the Government's disapproval of a requested change to manuals, drawings, specifications, or to a repair source or facility. 3.4.2 References on Drawings and Specifications:For repair and overhaul purposes only. All references to the "prime contractor" or the "actual manufacturer" appearing on the drawings and / or specifications or technical data furnished by the Government shall be read as the "Government Designated Agency" 3.4.3 Process Control Documentation: The contractor shall prepare and maintain repair procedures, and test / inspection information / procedures which shall be made available to the Government for review and approval. The procedures shall include sequential diagrams of processes, as well as the performance specifications to perform the testing / inspection procedures. Those processes shall be frozen after approval of the inspection / Test. 3.4.4 Beyond Economical Repair (BER). An item is BER if the cost of the repair exceeds 75% of the production quantity price to replace the item, current at time of award. This replacement price is for the purposes of BER determinations only, and may not be used or relied on by the offeror in the pricing of the repairs required by this contract. Items determined BER are not included in the contract price. The contractor shall obtain written concurrence from DCMA for all units determined by the contractor to be BER. All such determinations, including the basis for the determination, the repair required, the proposed price to repair and the DCMA written concurrence shall be provided by the contractor to the PCO, with a copy to the inventory manager. After receipt of the required documentation, the PCO shall provide the contractor disposition instructions or contractual authority for repair of the item. The contractor is not authorized to proceed with the repair until notification to proceed is received from the PCO. Any disposal ordered shall be performed by the contractor in accordance with all applicable regulations and in accordance with all DCMA disposal procedures and requirements. 3.4.5 Missing on Induction (MOI). A Weapons Repairable Assembly (WRA) is subject to this MOI provision if the item received by the contractor for repair is missing one or more Shop Replaceable Assemblies (SRAs). Contractor replacement of MOI SRAs is not included in the contract price. The contractor shall immediately notify DCMA when an item is received with MOI SRA(s) and shall obtain written verification from DCMA for all WRAs determined to have MOI SRA(s). The contractor shall provide all such determinations, including identification of the missing SRA(s), and the DCMA written verification, to the Inventory Manager with a copy to the PCO and ACO prior to induction and/or repair of the WRA. The contractor shall not induct and/or repair WRAs with MOI SRAs until instructions on how to proceed are provided to the contractor by the Inventory Manager (where no adjustment price to the contract is required) or by the PCO. Items received by the contractor missing consumable parts are not MOI items. Rather, repair of such items and replacement of the missing consumable parts are included in the contract price and the item shall be inducted and repaired by the contractor under this contract. 3.4.6 Replacing Failed or Missing Shop Replaceable Assembly (SRA) when repairinga Weapons Replaceable Assembly (WRA). 3.4.7 A. When the contractor believes one or more SRA(s) within a WRA are either: 3.4.8 Beyond Economic Repair (BER) or Beyond Repair (BR) i. e. the unit is not capable of being repaired because of the extent of physical damage), or Missing on Induction (MOI), the contractor shall obtain written verification from DCMA and advice from the Inventory Manager whether a SRA may be replaced by one or more of the following options: Ship in place from an existing spares or repair contract, if any, MILSTRIP the SRA(s), otherwise be provided direction for obtaining the SRA(s) at no cost to the contractor.The detailed procedures are set forth in Section 6.0 of the WEB-BASED COMMERCIAL ASSET VISIBILITY (CAV) STATEMENT OF WORK. 3.4.9 B.When not otherwise provided for (or precluded) by other terms of this contract, the contractor may seek written authorization to replace failed SRA(s) with Ready For Issue SRA(s). When authorized, the procedures set forth in paragraph 3.0 of Section 6.2 of the WEB-BASED COMMERCIAL ASSET VISIBILITY (CAV) STATEMENT OF WORK shall be followed. 3.4.10 Over and Above Repair (OAR). An item sent to the contractor shall be considered to require over and above (OAR) repair effort if the repair required is not the type of repair that would be anticipated as a result of normal Navy operation of the item and is not included in the contract pricing due to the nature or scope of the repair needed for that particular item. Therefore, repair of OAR items may be subject to equitable adjustment. The Contractor shall obtain written concurrence from DCMA for all units determined by the contractor to require OAR effort. All such OAR determinations, including the basis for the determination, the repair required, the proposed price to repair and the DCMA written concurrence, shall be provided by the contractor to the PCO prior to undertaking repair of the item. After receipt of the required documentation, the PCO shall provide the contractor disposition instructions or contractual authority for repair of the item. Any ordered disposal shall be performed by the contractor in accordance with all applicable regulations and DCMA disposal procedures and requirements. 3.5 4.0 PARTS AND MATERIALS 3.5.1 General. The contractor is responsible for supplying all parts and material necessary to perform the required repairs under this contract unless parts or material are specifically identified as Government Furnished Material (GFM). All parts and material used in performance of this contract shall be in accordance with the latest approved revision of applicable drawings and specifications and shall be new in accordance with FAR 52.211-5, Material Requirements, which is incorporated by reference herein. Authorization to use other than new material as defined by FAR 52.211-5 requires written approval from the PCO. In addition, cannibalization must be approved by the PCO. Cannibalization of units that have not been inducted is not typically authorized and requires specific approval by the PCO. 3.5.2 The contractor shall ensure it has access for the duration of this contract to updated drawings and specifications for parts and material required for repairs performed under this contract. Any change to such parts/material drawings or specifications requires Government approval in accordance with the Configuration Management provisions of this Statement of Work. Written approval from the PCO must be obtained prior to any change to the manufacturing source or manufacturing facility for all parts which require source approval, unless the contractor is the Design Control Agent (DCA) (i.e. the entity responsible for maintaining the latest configuration data) for the the contract item. If the contractor is the DCA, the contractor may approve approve changes to manufacturing source or manufacturing facility for all parts, including those which require source approval. Any repairs performed using unapproved changes to such drawings, specifications or manufacturing source or facility are done at the contractor's own risk. If the Government disapproves the requested change, the contractor shall replace any delivered items repaired using such unapproved change. The contractor is not entitled to any equitable adjustment to the contract price or terms based on the Government's disapproval of a requested change to the drawings, specifications or manufacturing source or facility. 3.5.3 Purchased Material Control and Parts Control. The contractor shall establish and maintain a system of control over purchased parts and material. Such controls shall, at a minimum, assure that the parts and and material purchased are in compliance with the requirements of this contract. 3.5.4 Receiving Inspection of Purchased Parts and Material. (1)Purchased items shall be inspected upon receipt at the contractor's facility to assure conformance with all requirements of the applicable drawings and specifications or (2)the contractor shall provide prior to the contract award evidence for Government review and approval of a purchased parts and material system which provides for the inspections to assure conformance with all requirements of the applicable drawings and specifications. Evidence of such inspections of such inspections shall be maintained by the contractor or subcontractor for Government review.The inspection report shall, at a minimum, include a record of all dimensional data (coordinate/positional), material, finish, and process with appropriate pass/fail criteria such as certifications and actual dimensonal readings. 3.5.5 ^^^NOTE^^^PART CANNIBALIZATION IS NOT AUTHORIZED UNLESS SPECIFICALLY APPROVED BY NAVSUP WSS AND THE BDE. 3.5.6 3.6 SOURCE AND LOCATION OF REPAIR SOURCE: 3.6.1 The contractor shall specify the name of the Source/Division performing the work and the actual location where work will be performed. LATCH ASSEMBLY,AIRC ;THE BOEING COMPANY; Company Name , ;MAIL STOP 45-24 P O BOX 3707; SEATTLE, WA 98124-2207; Address , ;81205; Cage Code inspection will be accomplished on the contractor's equipment 3.7 5.0 CONTRACTOR QUALITY REQUIREMENTS: 3.7.1 Quality Program. The Contractor shall establish, implement, document and maintain a quality system that ensures conformance to all applicable requirements of ISO 9001/ SAE AS9100. The Contractor's quality management system/program shall be designed to promptly detect, correct and prevent conditions that adversely affect quality. 3.7.2 Calibration System Requirements. Contractor shall maintain a calibration system that meets the requirements of ANSI/NCSL Z540.3, ISO-10012-1 or an equivalent calibration program acceptable to the Government. 3.8 6.0 CONFIGURATION MANAGEMENT (CM): 3.8.1 The contractor shall maintain a configuration management plan in accordance with the provisions of NAVSUP WSS configuration management clause NAVICPIA18. (Refer to contract). 3.9 7.0 MARKINGS. 3.9.1 Marking shall be as indicated in the contract when applicable. 3.10 8.0 STORAGE; 3.10.1 The contractor shall provide a proper enclosed warehouse environment for both material items awaiting repair and assets which have been repaired and are awaiting shipment to ensure the items are not damaged while being stored. 4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE

Closes Dec 4, 2026 · 4:30 PM ET
Read more →

Pedal Assembly, CONT

Department of Defense · DLA Aviation AT Oklahoma City, OK  |  Tinker Afb, Oklahoma  |  Posted Nov 5, 2026
Transportation & vehiclesSolicitation

This requirement is to procure a NSN: 1680-01-205-1178 RK PEDAL ASSEMBLY,CONT The Aft Crew station rudder pedal Linkages assembly that converts foot pressure inputs into electrical signals to control the rudder,brakes and nosewheel steering. cast aluminum

Closes Dec 5, 2026 · 2:00 PM
Read more →

RFP: N00383-27-R-B063; Navy Repair LTC

Department of Defense · Navsup Weapon Systems Support  |  Not listed  |  Posted Nov 5, 2026
Transportation & vehiclesSolicitationNo Set aside used

See attachment.

Closes Dec 5, 2026 · 4:00 PM ET
Read more →
← NewerPage 26 of 32Older →
Scroll to Top