Transportation & vehicles — open bids
750 open bids, newest first. Full details live here — you only leave for the official posting when you bid.
V--USWFS EU T3 Helo Fire - Fort Wainwright, AK
USWFS EU T3 Helo Fire - Fort Wainwright, AK
CYLINDER,HYDRAULIC BRA
Proposed procurement for NSN 1630011614419 CYLINDER,HYDRAULIC BRA: Line 0001 Qty 50 UI EA Deliver To: DLA DISTRIBUTION CHERRY POINT By: 0250 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION CHERRY POINT By: 0250 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.
Idaho Panhandle National Forest UTV and Track Set Purchase- Amendment
Solicitation 1240BD27Q0006 is hereby amended via Amendment 0001 to clarify domestic sourcing requirements and extend the closing date. The purpose of this amendment is to provide critical clarifications regarding the Buy American Act (BAA) requirements for CLIN 0002 (All-Season Track Set) and to formally extend the response deadline. Key Changes and Clarifications: Domestic Origin Requirement (BAA): Both the Utility Task Vehicle (CLIN 0001) and the Track Set (CLIN 0002) must qualify as domestic end products manufactured in the United States. Brand Name / Visual Reference Clarification: Any references or images featuring foreign-manufactured brands (such as Camso) in the original solicitation were for illustrative performance benchmarking purposes only. Proposing foreign-manufactured track systems does not comply with federal sourcing restrictions. Offerors must propose an American-made equivalent. Closing Date Extension: Original Closing Date: October 28, 2026, at 11:00 AM PDT Revised Closing Date: November 18, 2026, at 11:00 AM PST Instructions to Offerors: Active offerors who previously submitted proposals are permitted to submit revised packages substituting non-compliant components with domestic equivalents. Revised offers must explicitly specify the manufacturer name and manufacturing facility location for both items. A signed copy of the SF-30 (Amendment 0001) must be included as Page 1 of the revised quotation package. All other terms and conditions remain unchanged. Please review the attached SF-30 document for full details. This is a combined synopsis/solicitation for commercial products prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. The U.S. Forest Service (USFS), Idaho Panhandle National Forests, has a requirement for the procurement and delivery of one (1) Utility Task Vehicle (UTV) and one (1) compatible all-season track kit. The equipment will be utilized by the Fire/Fuels program for wildland fire suppression and prescribed fire operations over severe, uneven terrain. All equipment must be delivered new, fully assembled, fluids serviced, and in a 100% turnkey state ready for immediate field deployment upon arrival. Note: The UTV does not have to arrive with the track set physically installed on the vehicle. However, the vehicle must be fully prepped and the track kit must arrive brand new, complete, and ready to be installed by a certified dealer To be considered responsive, contractors must submit combined pricing for both line items below: CLIN 0001: Utility Task Vehicle (UTV) Quantity: 1 EA Delivery Location: IDAHO PANHANDLE NATIONAL FORESTS SUPERVISORS OFFICE 3232 WEST NURSERY ROAD COEUR D'ALENE ID 83815 CLIN 0002: All-Season Track Kit Quantity: 1 EA Specifications: Must be 100% factory-compatible, field-interchangeable, and align directly with the vehicle awarded under CLIN 0001. Salient Characteristics (Minimum Technical Specifications) Proposed vehicles must meet or exceed the following design limits and features: Engine & Cooling: 4-stroke, liquid-cooled engine. Cylinder Displacement: Min: 998 cc | Max: 1500 cc. Horsepower: Min: 80 hp | Max: 150 hp. Dimensions: Length (120�138 in), Width (63�66 in), Height (76�82 in). Ground Clearance: Min: 13 in | Max: 20 in. Capacities: Person Capacity (2�3), Payload (1000�1700 lbs), Box Capacity (1000�1500 lbs), Towing Capacity (2500�3500 lbs). Tires: 8 to 10 ply; Size Min: 27 x 9 x 14 | Max: 30 x 11 x 15. Included Accessories/Features: Enclosed cab with full doors, hard top roof, glass full tip-out windshield with wipers, sliding window rear panel, heater/defroster, protection headache rack, front/rear a-arm protectors, skid plate, front/rear bumpers, fender flares, rock sliders, chainsaw mount, LED light bar, rearview mirror, and a >4,500 lb winch. Track Specs: Rubber tracks with a steel frame designed for all-season flotation/traction. Minimum 2-year warranty on tracks; minimum 1-year warranty on the UTV. Origin: Must be manufactured in the U.S. Delivery & Shipping Terms Delivery Timeline: All items must be physically delivered within 90 calendar days from the formal date of award. Shipping: FOB Destination. Pricing must be fully inclusive of all freight, handling, and delivery charges. The contractor is responsible for offloading equipment at the specified facility. No loading dock or equipment available to unload. UTV does not have to arrive with tracks installed but kit must be ready to be installed by a certified Evaluation and Basis for Award The Government will conduct a Side-by-Side Comparative Evaluation of quotes in accordance with simplified commercial procedures (FAR 12.201-1 and 12.205(c)(2)). Formal scoring matrices will not be used. A single Firm-Fixed-Price (FFP) contract will be awarded based on the following factors: Technical Capability & Salient Characteristics: Degree to which the solution meets or exceeds design limits and accessory bundles. Delivery Timeline: Preference/favorable evaluation may be given to shorter delivery timelines than the mandatory 90 days. Price: Evaluated to ensure fairness and reasonableness. Submission Requirements Interested vendors must have an Active Registration in SAM (https://sam.gov) at the time of quote submission. Omitting a Unique Entity ID (UEI) will exclude the quotation package from consideration. Quotation packages must be organized in the following order and submitted via email to mindy.hickman@usda.gov: Failure to provide these documents will result in your offer being exluded from concideration. Spec sheets must be provided to complete an evaluation. SF-1449: Completed and signed (Blocks 17a, 30a, 30b, and 30c; including telephone, email, and SAM UEI in Block 17a). SF-30 Amendments: Acknowledged and signed (if any are posted by the CO). Schedule of Items: Completed pricing for CLIN 0001 and CLIN 0002. Technical Documentation: Drawings, spec sheets, or product brochures verifying compliance with salient characteristics. Closing Date for Receipt of Quotes: On or before 28 October 2026 no later than 11:00 AM PDT.
HYDRAULIC OIL COILER_End_Item_F-15_NSN_1650012288118RK_PN_UA538795-3
See attachment.
POWER CONTROL ASSEMBLY
Synopsis PR: FD2030-26-01914 1. Estimated issue date and estimated closing/response date: Issue: 20 November 2026 Closes: 21 December 2026 2. RFP# SPRTA1-27-R-0104 3. Service/Spare/Repair/OH: Spares 4. AMC: 1/C 5. Nomenclature/Noun: Power Control Assembly 6. NSN: 1680-01-258-5608 7. PN: 2101272-4-2 8. History: 15 Dec 2015, 2 each, Honeywell Aerospace US LLC (64547) 9. Description/Function: Provides emergency power to aircraft.. DIMENTIONS, 9.19 INCH LONG BY 3.59 INCH WIDE BY 4.75 INCH TALL. Weight 5.24 LBS. Material: Metal alloy with electronic components. 10. Total Line-Item Quantity: L/I 0001 - 13 Each 11. Application (Engine or Aircraft): F-16 12. Destination: L/I 0001 Ship to DTW004 13. Required Delivery: L/I 0001 Ship To DTW004, On or Before 07 DEC 2026 14. Qualification Requirements: This part requires engineering source approval by the design control activity in order to maintain the quality of the part. 15. Export Control Requirements: Yes 16. UID: Note to Contractor: UID requirements will apply 17. Qualified Sources: Honeywell International, Inc. (CAGE 64547) 18. Set-aside: This acquisition will not be set aside. 19. Mandatory Language: The Government does not own the data or the rights to the data needed to manufacture this item. Firms interested in participating in this procurement are encouraged to contact the OEM to inquire about the data or rights to the data. In accordance with FAR 5.207(c)(16)(i), all responsible sources may submit a bid, proposal, or quotation which shall be considered by the agency. Foreign owned firms are advised to contact the contracting officer or program manager before submitting a proposal to determine whether there are restrictions on receiving an award. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the procurement described make contract with the firm listed. This acquisition involves technology that has a military or space application. The extent of foreign participation has not yet been determined. Nothing in this notice contradicts other restrictions, identified in the synopsis notice or solicitation, regarding eligible sources (e.g., if this is a small business set aside, foreign sources may not participate as potential prime contractors but could, if otherwise eligible, participate as subcontractors). Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the supplies or services described. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. Government's obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer Electronic procedures will be used for this solicitation. Hardcopies of the solicitation will not be sent from this office. The solicitation will be available for download only at www.sam.gov. Authority: 10 U.S.C. 2304(c) (1), Justification: supplies (or Services) required are available from only one or a limited number of responsible source(s) and no other type of supplies or services will satisfy agency requirements. The proposed contract action is for supplies and services for which the Government intends to solicit and negotiate with only one, or a limited number of sources under the authority of FAR 6.302. This notice of intent is not a request for competition. However, all proposals received within 45 days (30 days if award is issued under an existing basic ordering agreement) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Note: While price will be a significant factor in the evaluation of offers, the final contract award decision may be based upon a combination of price and past performance factors as detailed in the solicitation. Note: An Ombudsman has been appointed to hear concerns from offerors or potential offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to the source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at (405) 855-3552. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Request for written quotation will be issued. Only written or faxed request received directly from the requestors are acceptable. The anticipated award date will be 90 days after the issuance of this notice. 20. Buyer name and email address: Questions concerning this synopsis or subsequent solicitation can be directed to the buyer Michael Hannan at micahel.hannan.1@us.af.mil.
TRIM SERVO ASSY,AIR
CONTACT INFORMATION|4|APAC.43|YIS|445-737-3530|SEAMUS.CORKERY@DLA.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|||X|ISO 9000 OR EQUIVALENT||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|INVOICE AND RECEIVING REPORT (COMBO)|N/A|TBD|SPRPA1|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|ONE YEAR FROM DATE OF DELIVERY |45 DAYS AFTER DISCOVERY OF DEFECT||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| ESTIMATE OF PERCENTAGE OF RECOVERED MATERIAL CONTENT FOR EPA DESIGNATED PRODUCTS (MAY 2008))|1|| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| INSTRUCTIONS TO OFFERORS--COMPETITIVE ACQUISITION (DEV 2026-O0048)(MAR 2026)|2||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| This solicitation is being issued under Emergency Acquisition Flexibilities (EAF) Authority formally known as Special Emergency Procurement Authority (SEPA). Drawings are not available for this Request for Quotation. Offerors are advised that offers received from sources which are not government-approved sources of supply will be deemed technically unacceptable, and therefore ineligible for award. Any distributors of approved source(s) MUST submit a copy of their authorized distributor letter, on the source?s letterhead, to the buyer point of contact indicated on the solicitation via email, at time of proposal submittal. \
ACTUATOR,MECHANICAL
CONTACT INFORMATION|4|APAB.27|YRG|215-514-6773|NICHOLAS.SMARRO@DLA.MIL| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|||X|ISO 9000 OR EQUIVALENT||||| FMS DELIVERY AND SHIPPING INSTRUCTIONS|3|X|TBD|TBD| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16| INVOICE AND RECEIVING REPORT (COMBO)|N/A|TBD|SPRPA1|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD|TBD| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|ONE YEAR FROM DATE OF DELIVERY|45 DAYS AFTER DISCOVERY OF DEFECT||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| INSTRUCTIONS TO OFFERORS--COMPETITIVE ACQUISITION (DEV 2026-O0048)(MAR 2026)|2||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||X| This solicitation is being issued under Emergency Acquisition Flexibilities (EAF) Authority formally known as Special Emergency Procurement Authority (SEPA). Drawings are not available for this Request for Quotation. Offerors are advised that offers received from sources which are not government-approved sources of supply will be deemed technically unacceptable, and therefore ineligible for award. Any distributors of approved source(s) MUST submit a copy of their authorized distributor letter, on the source?s letterhead, to the buyer point of contact indicated on the solicitation via email, at time of proposal submittal. \
CUSHION,SEAT,VEHICULAR
Proposed procurement for NSN 2540015000544 CUSHION,SEAT,VEHICULAR: Line 0001 Qty 327 UI EA Deliver To: By: 0081 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 49. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 27797 PM6620. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
HOOD,ENGINE COMPARTMEN
Proposed procurement for NSN 2510014732309 HOOD,ENGINE COMPARTMEN: Line 0001 Qty 166 UI EA Deliver To: By: 0089 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 24. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. This is a source controlled drawing item. Approved source is 5LRZ6 12338940-1. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
SEAL ASY HUB
Proposed procurement for NSN 2530007364672 SEAL ASY HUB: Line 0001 Qty 696 UI AY Deliver To: By: 0075 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 104. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. This is a source controlled drawing item. Approved source is 11083 1320704. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. The items furnished must meet the requirements of the drawing cited in the solicitation. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
COVER,TRANSMISSION
Proposed procurement for NSN 2520016556035 COVER,TRANSMISSION: Line 0001 Qty 4 UI EA Deliver To: By: 0081 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 1. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
HEADREST,SEAT,VEHICULA
Proposed procurement for NSN 2540013893170 HEADREST,SEAT,VEHICULA: Line 0001 Qty 189 UI EA Deliver To: By: 0179 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 28. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 54786 101473-1. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
CALIPER,DISC BRAKE
Proposed procurement for NSN 2530016570522 CALIPER,DISC BRAKE: Line 0001 Qty 4 UI EA Deliver To: By: 0075 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 1. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved sources are 0VSH3 BRDMCAL-10-12-316SS-SSPAD; 48CF5 BMS-CALP-3-6K-SS. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
CYLINDER ASSEMBLY,HYDR
Proposed procurement for NSN 2530013758150 CYLINDER ASSEMBLY,HYDR: Line 0001 Qty 33 UI EA Deliver To: By: 0075 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 4. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 0WJE1 3004582-002. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
COVER,FITTED,VEHICULAR
Proposed procurement for NSN 2540016315808 COVER,FITTED,VEHICULAR: Line 0001 Qty 24 UI EA Deliver To: By: 0080 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 3. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
CHAIN ASSEMBLY,BAND TR
Proposed procurement for NSN 2540015839967 CHAIN ASSEMBLY,BAND TR: Line 0001 Qty 1 UI EA Deliver To: By: 0080 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 1. The Guaranteed Minimum quantity will be 1. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 3PSD7 9250497. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
ARMOR,TRANSPARENT,VEHICULAR WINDOW
Contract Specialist: John McCarthy Email: John.mccarthy@dla.mil Solicitation will be issued on or about: 11/23/2026 Solicitation will close on or about: 12/28/2026 NSN: 2541-016706560 Nomenclature: ARMOR,TRANSPARENT,VEHICULAR WINDOW Set-Aside Type: Total Small Business Quantity: 485 EA FOB, Inspection, and Acceptance points as required per the solicitation. Required Delivery: 120 DAYS Ship-To Address: CLIN 0001 SW3121 DLA DISTRIBUTION ALBANY DDAG-T MCLB BLDG 1221 DOOR 20 814 RADFORD BLVD ALBANY GA 31704-1128 US CLIN 0002 W62G2T W1A8 DLA DIST SAN JOAQUIN 25600 S CHRISMAN ROAD 25600 S CHRISMAN RD REC WHSE 57 TRACY CA 95304-5000 US CLIN 0003 W25G1U W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US Approved Source(s) � TDP Rev B Gen 2 IAW BASIC DRAWING NR 19207 12600534 REVISION NR G DTD 01/10/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE QAP 16236 CDRL-TA-FAT-PCT-COQC REVISION NR DTD 10/19/2022 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12604893 REVISION NR R DTD 11/29/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600041 REVISION NR D DTD 07/09/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12593834 REVISION NR K DTD 03/19/2026 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12604894 REVISION NR B DTD 03/31/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12612043 REVISION NR A DTD 03/10/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12479550 REVISION NR C DTD 05/17/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600140 REVISION NR D DTD 12/17/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600517 REVISION NR C DTD 07/23/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600518 REVISION NR B DTD 01/13/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600527 REVISION NR A DTD 07/26/2016 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600516 REVISION NR G DTD 01/10/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600519 REVISION NR H DTD 10/31/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600528 REVISION NR A DTD 01/16/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600530 REVISION NR C DTD 11/04/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600531 REVISION NR A DTD 12/13/2016 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600532 REVISION NR C DTD 11/04/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12608381 REVISION NR A DTD 01/16/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12608387 REVISION NR A DTD 01/16/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600535 REVISION NR H DTD 10/31/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600538 REVISION NR D DTD 03/16/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600534 REVISION NR A DTD 04/17/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600534 REVISION NR DTD 11/18/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE QAP 16236 SQAP-PPAP-JLTV REVISION NR DTD 04/17/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 PPAP-JLTV REVISION NR DTD 01/01/2022 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 ATPD-2352 REVISION NR U DTD 12/01/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE QAP 16236 SQAP-ATPD2352-FAT REVISION NR A DTD 02/04/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE QAP 16236 SQAP-ATPD2352-PCT REVISION NR A DTD 02/04/2021 PART PIECE NUMBER: While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, and performance. DLA Internet Bid Board System (DIBBS) offers are acceptable for this solicitation. Offerors must complete the entire solicitation. Offers must be submitted on a hard copy of this SF 33 Request for Proposal (RFP), scanned, and uploaded through DIBBS (PREFERRED METHOD) or email proposals to: JOHN.MCCARTHY@DLA.MIL. All offers shall be in the English language and in US dollars. All interested suppliers may submit an offer. Based on market research this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government�s requirement with a commercial item with 15 days of this notice. This requirement will be solicited per FAR part 15.
ANGKOR SENTINEL 27 TRANSPORTATION SERVICES
Questions and Answers The RFQ says not to share it with other vendors, while the PWS contemplates subcontractors. May Prime Contractor provide necessary scope details to prospective performing subcontractors solely to obtain pricing? Please identify any approval or nondisclosure requirements. You are allowed to share the PWS and Combined Synopsis and Solicitation with prospective subcontractors. Please provide the referenced Excel Pricing Sheet and Section 889 form, or identify their download location. No excel pricing sheet provided, please provide an excel document format for the pricing referenced in the CLIN structure on Combined Synopsis and Solicitation. You can complete the Section 889 section on the Combined Synopsis and Solicitation. Should the two cultural-event options be separately priced and included in the evaluated total? The pricing table includes options, but the evaluation text states there are no options. Cultural Event CLINs shall also be evaluated. Please reconcile CLIN 0004 for DBA insurance with the instruction that DBA costs will not be separately priced or evaluated. DBA shall not be evaluated, since it would only be an estimate until awardee is selected. But interested vendors are requirement to have an estimate quote for DBA Insurance. Please confirm minimum seating of nine passengers per van and 45 per coach, excluding drivers, given inconsistent wording in PWS 5.2(a)-(b). Minimum seating excluding drivers are 45 Passengers/Seats; Disregard error on PWS 5.2(a) Title 40 Passenger Bus. Requirement is for 45 Passengers Minimum excluding drivers. The PWS describes the daily commute (13�27 February) as �Daily transit from Phum Serey Hotel to the PKO Training Center (morning departure and evening return).� Trips per day: Should vendors assume one round trip per day, with a morning trip from the Phum Serey Hotel to the PKO Training Center and an evening trip back to the hotel? Or should they plan for additional trips during the day? The daily commute trips from Phum Serey Hotel to PKO would typically be early morning anytime from 0500 � 0700 and return evening anytime from 1900 � 2000; please note the COR will provide pickup times in advance to vendor for coordination�s. Approximate times: If it is one round trip, do you know the approximate morning departure time and evening return time? Even a rough window would help vendors plan driver shifts within the 12-hour workday in the PWS. The daily commute trips from Phum Serey Hotel to PKO would typically be early morning anytime from 0500 � 0700 and return evening anytime from 1900 � 2000; please note the COR will provide pickup times in advance to vendor for coordination�s. Vehicles during the day: Should the coaches and drivers remain on standby at the training center between the morning and evening trips, or may they leave and return for the evening pickup? Coaches and Drivers may leave and return after pickup and drop off Could you provide the expected daily call sheet (routes, times, airport shuttle frequency)? Should the coaches be priced as on call 12 hours a day every day from 13 to 27 February, including weekends? . The daily commute trips from Phum Serey Hotel to PKO would typically be early morning anytime from 0500 � 0700 and return evening anytime from 1900 � 2000; please note the COR will provide pickup times in advance to vendor for coordination�s. Will arrivals use the new Techo International Airport (KTI) or the former Phnom Penh airport? Techo International Airport (KTI) Cultural day: how many passengers per coach, and is an overnight stay in Siem Reap expected? Minimum seating excluding drivers are 45 Passengers/Seats; Disregard error on PWS 5.2(a) Title 40 Passenger Bus. Requirement is for 45 Passengers Minimum excluding drivers. Overnight stay at Siem Reap anticipated. What are the expected headcounts and dates for the advance party, main body and rear party at the PKO Training Center? Approximately 90 Passengers, arrrival times stagged. Arrival Window: Two (2) days of dedicated arrival shuttle support. Departure Window: Two (2) days of dedicated departure shuttle support. Will the Government provide a VAT-exemption document that Cambodian subcontractors can apply to their invoices? If not, may VAT paid to subcontractors be included in our price? No VAT exemption document available, Prime Contractor is responsible for their subcontractors. 0001: 3 VAN , 06 Feb � 27 Feb , These three vans will be used for airport shuttle to Hyatt Regency , From Hyatt to Phum Serey Resort , Daily use for Phum Serey Resort and training site daily and sometime travel to Phnom Penh or Embassy . Correct, 3 Vans will be used for airport shuttle from Techno International Airport to Hyatt Regency Phnom Penh, From Hyatt Regency Phnom Penh to Training Center (PKO) Kampong Speu or Phum Serey Resort Hotel, and Daily travel between Phum Serey Resort and training site and sometime travel to Phnom Penh or Embassy. 0002: 1 VAN , 27 Feb � 05 Mar , This van will be used for travelling to PKO daily from Phnom Pen and airport shuttle This Van will be used for travel from PKO back to Phnom Penh on/around 26 or 27 Feb, it shall be used for airport shuttle from Hyatt Regency Phnom Penh to Techno International Airport, and trips within Phnom Penh. 0003: 2 (45 seats bus ) , 13 Feb � 27 Mar These two buses will be used for airport shuttle to Hyatt Regency , From Hyatt to Phum Serey Resort , Daily use for Phum Serey Resort and training site daily. and from Hyatt to airport when the team departure. Period of Performance is 13 Feb � 27 Feb 2027; and correct the two buses will be used for airport shuttle from Techno International Airport to Hyatt Regency Phnom Penh (Arrival Window: Two (2) days of dedicated arrival shuttle support & Departure Window: Two (2) days of dedicated departure shuttle support) Airport Arrival Window TBD on/around 13-14 Feb; Airport Departure Window TBD on/around 26-27 Feb. From Hyatt Regency Phnom Penh to Training Center (PKO) Kampong Speu or Phum Serey Resort Hotel, and Daily travel between Phum Serey Resort and training center 0004: Defense Base Act (DBA Insurance) , please advise the DBA insurance mean ? because our vehicle covered by insurance and covered passenger too , So we don't need to add cost on this clin 0004 DBA Insurance is required for services with the US Government, it is only required to cover your employee not the passengers. Please read 52.212-1 INSTRUCTIONS TO OFFERORS � ADDENDUM Option 1 & 2 , Will need 2 or 5 bus from designated hotel/PKO vicinity (Kampong Speu) to Siem Reap/Angkor Wat area. Option 1: Cultural Event Day Transportation Cost US Forces Two (2) � 45-passenger Coach Buses with Drivers, fully air-conditioned / climate-controlled, privacy blinds. Round-trip from designated hotel/PKO vicinity (Kampong Speu) to Siem Reap/Angkor Wat area. Includes all driver costs, fuel, tolls, parking, and necessary support. This would be an extension of CLIN 0003, the two buses shall be used for a cultural event trip to Siem Reap during the estimated window, dates/times shall be confirmed NLT 14 days prior. Option 2: Cultural Event Day Transportation Cost Cambodia Forces Five (5) � 45-passenger Coach Buses with Drivers, fully air-conditioned / climate-controlled, privacy blinds. Round-trip from designated hotel/PKO vicinity (Kampong Speu) to Siem Reap/Angkor Wat area. Includes all driver costs, fuel, tolls, parking, and necessary support. This is an additional 5 Buses to be used for a cultural event trip to Siem Reap during the estimated window, dates/times shall be confirmed NLT 14 days prior. Total of 7 Buses for Cultural Event Day. Signed 889 Form , What is form mean ? Contractors are required to be registered on SAM.gov. If you have an 889 compliant screenshot from SAM.gov that would be sufficient, you can also complete provision 52.204-26 COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES�REPRESENTATION on combined synopsis and solicitation. Amendment to Combined Synopsis and Solicitation Changes to PWS 5.2.7 c) From: "Equipment operators shall be proficient in conversational Basic English and able to translate directions / instructions from the COR." To: "Contractor Specified Contract Manager shall be proficient in conversational Basic English and able to translate directions / instructions from the COR while Equipment operators are recommended to be proficient in conversational Basic English and able to translate directions / instructions from the COR but not required. See attached Performance Work Statement (PWS) and Combined Synopsis and Solicitation Documents Questions can be sent to MAJ Pandy, Phillip at phillip.d.pandy2.mil@army.mil and SSG Mbawuike, Uchechukwu at uchechukwu.mbawuike.mil@army.mil. Last Date/Time for questions is 06 November 2026 @ 1300 1PM Hawaii Standard Time Zone. All responses must be submitted in PDF format and the Pricing Sheet must be submitted in Excel format via email to MAJ Pandy, Phillip at phillip.d.pandy2.mil@army.mil and SSG Mbawuike, Uchechukwu at uchechukwu.mbawuike.mil@army.mil. All submissions are due to the responsible Contracting Office no later than 20 November 2026 @ 1300 1PM Hawaii Standard Time Zone.
Lease and Maintenance of Temporary Aircraft Hangar Facilities Osan Air Base
Lease and Maintenance of Temporary Aircraft Hangar Facilities Osan Air Base, Republic of Korea
EXTINGUISHER, FIRE, AIRCRAFT, NSN# 1680015954096JY, PN# 472555-4
See the attached pre-solicitation synopsis.
GENERATOR CONTROL U
ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|||x|ISO9001 or higher||||| FMS DELIVERY AND SHIPPING INSTRUCTIONS|3||PU47|N52214.4| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report(Combo)||TBD|SPRPA1|TBD|TBD|TBD|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| WARRANTY OF SUPPLIES OF A NONCOMPLEX NATURE (JUN 2003)|6|365 days|45 days after discovery of defect||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| MINIMUM BID ACCEPTANCE PERIOD (APR 1984)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| EVALUATION-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEV 2026-O0028)(FEB 2026))|3|||| This solicitation is being solicited under Emergency Acquisition Flexibilities EAF) Authority formerly known as Special Emergency Procurement Authority (SEPA). THIS IS A CRITICAL APPLICATION ITEM (CAI). Customer requires new/unused material. \ 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS - NOT APPLICABLE 4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES ASSIGNMENT OF UNIQUE IDENTIFICATION (UID) AND SERIALIZATION SHALL BE IN ACCORDANCE WITH MIL-STD-130, (LATEST REVISION) REFERENCED BY MIL-DTL-18307H AT THIS TIME.
DIFFERENTIAL GEAR U
Proposed procurement for NSN 2520150266567 DIFFERENTIAL GEAR U: Line 0001 Qty 4 UI EA Deliver To: W1A8 DLA DISTRIBUTION By: 0090 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes may be submitted electronically.
Five-Year Requirements Contract
NAVSUP WSS is anticipating the award of follow on 5 Year Requirements Contract (LTC) for the repair coverage of the items identified in Attachment A (see attached). See Exhibit A for NSN, P/N, Nomenclature and estimated yearly quantities of the items currently needed for this BOA. For any questions concerning this notice, contact Meghan Gubicza, N723.15, meghan.e.gubicza.civ@us.navy.mil Orders issued under the Requirements Contract and pursuant to this synopsis will be issued pursuant to 10 USC 3204(A) (1). The item contemplated for procurement and repair requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. The only qualified source for this repair is BAE SYSTEMS INFORMATION & ELECTRONIC SYSTEMS INTEGRATION INC. (CAGE 19397). The subject items require Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochure listed below. Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Support/Business-Opps/ Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Support/Business-Opps/ This brochure identifies the technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirements, award of the subject requirement may continue based on Fleet support needs. The NAVSUP WSS Commercial Item Identification Brochure is now available at: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Support/Business-Opps/
AUDIO CONTROL PANEL
CONTACT INFORMATION|4|N791.10|T1M|7712290443|kelly.a.gipson2.civ@us.navy.mil| COMMERCIAL ITEM PROCUREMENT NOTICE - AWARD|4||||| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)|2||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8||||||||| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and receiving report||TBD|N00383|TBD|TBD|SEE SCHEDULE|TBD||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| MANDATORY USE OF WORKFLOW PRO (WFP) MOD ASSIST MODULE|1|Kelly Gipson| VALUE ENGINEERING (JUN 2020)|3|||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUNITY FOR VETERANS (DEV 2026-O0040)(FEB 2026)|4||||| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (DEV 2026-O0040)(FEB 2026)|4||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| SECURITY PROHIBITIONS AND EXCLUSIONS (CLASS DEVIATION 2026-O0025)(FEB 2026)|7|||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (DEVIATION 2026-O0043)(FEB 2026))|13|||||||||||||| ROYALTY INFORMATION (APR 1984)|1|| INSTRUCTIONS TO OFFERORS--COMPETITIVE ACQUISITION (DEV 2026-O0048)(MAR 2026)|2||| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| EVALUATION-COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEV 2026-O0028)(FEB 2026))|3|||| This solicitation is for repair of PN 5347-1. This solicitation will be using competitive procedures. Contractors may propose a Not-to-Exceed (NTE) repair unit price or a Firm Fixed Price. Proposals will be evaluated on an LPTA basis. If a NTE price is proposed, the ceiling price will be used as thebasis for evaluating whether the proposed price is the lowest proposed price. This requirement will be utilizing Emergency Acquisition Flexibilities (EAF). Quotes may be emailed to the below address and must be received by 04:30PM ESTon the closing date, listed in block 10 on page 1 of this solicitation: Kelly.a.gipson2.civ@us.navy.mil Quotes received after the closing date are considered to be late and will notbe considered for award. If only one acceptable quote is received in response to this solicitation,competitive procedures will shift to sole source negotiations.All contractual documents (i.e. contracts, purchase orders, task orders,delivery orders and modifications) related to the instant procurement areconsidered to be "issued" by the Government when copies are either depositedin the mail, transmitted by facsimile, or sent by other electronic commercemethods, such as email. The Government?s acceptance of the contractor?sproposal constitutes bilateral agreement to "issue" contractual documents asdetailed herein. Early and incremental deliveries accepted. The Government intends to make a single award to the eligible, responsiblequoter whose quote is technically acceptable and which is determined most advantageous to the Government, price considered. Repair Turnaround Time (RTAT) definition: The contractual delivery requirementis measured from asset Return to the date of asset acceptance under the termsof the contract. For purposes of this section, Return is defined as physicalreceipt of the F-condition asset at the contractor?s facility as reflected inthe Action Date entry in the Commercial Asset Visibility (CAV) system. Inaccordance with the CAV Statement of Work, the contractor is required toaccurately report all transactions by the end of the fifth regular businessday after receipt and the Action Date entered in CAV must be dated to reflectthe actual date of physical receipt. The Contractor must obtain final inspection and acceptance by the Governmentfor all assets within the RTATs established in the subsequent contract. Required RTAT: 0090 days after receipt of asset Throughput Constraint: Contractor must provide a throughput Constraint foreach NSN(s). Total assets to be repaired monthly after initial deliverycommences X/month (contractor fill in #). A throughput of ##____ per monthreflects no throughput constraint. Induction Expiration Date: 365 days after contract award date. Any assetreceived after this date in days is not authorized for repair withoutbi-lateral agreement between the Contractor and NAVSUP WSS ContractingOfficer. Reconciliation: A reconciliation modification will be issued after final Inspection andacceptance of all assets inducted under the subsequent contract. The partieshave agreed to a price (shown on the schedule page) for each unit at thenegotiated RTAT. Such prices are based on the Contractor meeting the RTATrequirements described within the schedule page. If the Contractor does notmeet the applicable RTAT requirement, consideration will be assessed andsubject to negotiation. Addendum to FAR 52.212-4 Contract Terms and Conditions Commercial Items Under paragraph (a), "Inspection and Acceptance" add the following: 1.FAR Clause 52.246-2 Inspection of Supplies-Fixed Price applies as amended herein. All product audits performed at the discretion of the DCMA QAR shall be conducted by witnessing contractor inspections or tests on a non-interference basis. (e.g., when advance notification is furnished of the time contractor inspections or tests will be performed, and that time arises and the QAR is unavailable, the contractor shall proceed. Verification shall then be accomplished by records review.) 2.The contractor shall establish, implement, document and maintain a quality system that ensures conformance to all applicable requirements of ISO9001:2008 "Quality Management Systems - Requirements /AS9100C "Quality Management Systems - Requirements for Aviation, Space and Defense Organizations" and a calibration system that addresses the elements of ISO-10012-1, ANSI/NCSL Z540 or an equivalent program approved by the Navy. 3.The government reserves the right to assess the contractor's compliance to its documented quality system throughout the performance of this contract. The quality system procedures, planning, and all other documentation, media, and data which comprise the quality system shall be made available to the government for their review and use. The acceptance of non-conforming supplies is a prerogative of and shall be as prescribed by the government. The government reserves the right to disapprove the quality system or portions t thereof when it fails to meet its intended objectives. 4.The contractor shall not make any configuration changes, engineering changes or part number changes to the contract/purchase order items, including, but not limited to, the item's hardware, software or firmware, unless approved by the Procurement Contracting Officer (PCO). In addition, approval by the appropriate technical authority may also be required. Guidance on how to submit a proposed engineering or part number change may be obtained from the PCO. 5.The contractor shall not manufacture any item for acceptance by the Government that incorporates a known departure from technical or contractual requirements unless a request for a deviation has been approved. Authorized deviations are a temporary departure from the requirements only and do not authorize a change to the item's configuration baseline. Any deviation, major or minor, must be approved by the PCO prior to acceptance. Minor variances must be reviewed and concurred with by the designated Government r representative (e.g. DCMA) prior to acceptance. \ 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 1.2 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;AVTECH CORP; drawing number ( ;30242; ) ;5347-1; , Revision ;latest; and all details and specifications referenced therein. 1.3 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.4 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item. It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition. 3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order. The term "contract" encompasses a contract, an order, or a project work order. 3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled). 3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired). 3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to to return the following items to a Ready For Issue (RFI) condition: AUDIO CONTROL PANEL ;5347-1; P/N, ;7RH 1680 015855462 P8; NSN, ;Available repair manuals, drawings and specifications per p/n requirements; Tech Publications 3.3.3 RFI is defined as that condition allowing the items to perform properly and reliably in an operational environment in a manner they were intended to operate.The contractor must perform all repairs/upgrades at the facility identified within this SOW. Repairs performed by the contractor or subcontractor shall be performed in accordance with the specified drawings and repair manual(s). 3.4 Changes to such manuals used for repairs under this contract, or changes to drawings or specifications used in the manufacture of parts utilized in these repairs, require Procuring Contracting Officer (PCO) approval in accordance with the Configuration Management provisions of this Statement of Work or contract. Under no circumstances should the repair, test, and inspection extend beyond the requirements of this paragraph unless authorized by the Government QAR.In addition, requests for approval of changes to a repair source or repair facility shall be submitted in writing to the PCO prior to making any such change. 3.4.1 Any repairs performed using unapproved changes to such manuals, drawings, specifications, or changes to repair source or facility are done at the contractor's own risk. If the Government disapproves the requested change, the contractor shall replace any delivered items repaired using such unapproved manuals,drawing, specification, repair source or repair facility change. The contractor is not entitled to any equitable adjustment to the contract price or terms based on the Government's disapproval of a requested change to manuals, drawings, specifications, or to a repair source or facility. 3.4.2 References on Drawings and Specifications:For repair and overhaul purposes only. All references to the "prime contractor" or the "actual manufacturer" appearing on the drawings and / or specifications or technical data furnished by the Government shall be read as the "Government Designated Agency" 3.4.3 Process Control Documentation: The contractor shall prepare and maintain repair procedures, and test / inspection information / procedures which shall be made available to the Government for review and approval. The procedures shall include sequential diagrams of processes, as well as the performance specifications to perform the testing / inspection procedures. Those processes shall be frozen after approval of the inspection / Test. 3.4.4 Beyond Economical Repair (BER). An item is BER if the cost of the repair exceeds 75% of the production quantity price to replace the item, current at time of award. This replacement price is for the purposes of BER determinations only, and may not be used or relied on by the offeror in the pricing of the repairs required by this contract. Items determined BER are not included in the contract price. The contractor shall obtain written concurrence from DCMA for all units determined by the contractor to be BER. All such determinations, including the basis for the determination, the repair required, the proposed price to repair and the DCMA written concurrence shall be provided by the contractor to the PCO, with a copy to the inventory manager. After receipt of the required documentation, the PCO shall provide the contractor disposition instructions or contractual authority for repair of the item. The contractor is not authorized to proceed with the repair until notification to proceed is received from the PCO. Any disposal ordered shall be performed by the contractor in accordance with all applicable regulations and in accordance with all DCMA disposal procedures and requirements. 3.4.5 Missing on Induction (MOI). A Weapons Repairable Assembly (WRA) is subject to this MOI provision if the item received by the contractor for repair is missing one or more Shop Replaceable Assemblies (SRAs). Contractor replacement of MOI SRAs is not included in the contract price. The contractor shall immediately notify DCMA when an item is received with MOI SRA(s) and shall obtain written verification from DCMA for all WRAs determined to have MOI SRA(s). The contractor shall provide all such determinations, including identification of the missing SRA(s), and the DCMA written verification, to the Inventory Manager with a copy to the PCO and ACO prior to induction and/or repair of the WRA. The contractor shall not induct and/or repair WRAs with MOI SRAs until instructions on how to proceed are provided to the contractor by the Inventory Manager (where no adjustment price to the contract is required) or by the PCO. Items received by the contractor missing consumable parts are not MOI items. Rather, repair of such items and replacement of the missing consumable parts are included in the contract price and the item shall be inducted and repaired by the contractor under this contract. 3.4.6 Replacing Failed or Missing Shop Replaceable Assembly (SRA) when repairinga Weapons Replaceable Assembly (WRA). 3.4.7 A. When the contractor believes one or more SRA(s) within a WRA are either: 3.4.8 Beyond Economic Repair (BER) or Beyond Repair (BR) i. e. the unit is not capable of being repaired because of the extent of physical damage), or Missing on Induction (MOI), the contractor shall obtain written verification from DCMA and advice from the Inventory Manager whether a SRA may be replaced by one or more of the following options: Ship in place from an existing spares or repair contract, if any, MILSTRIP the SRA(s), otherwise be provided direction for obtaining the SRA(s) at no cost to the contractor.The detailed procedures are set forth in Section 6.0 of the WEB-BASED COMMERCIAL ASSET VISIBILITY (CAV) STATEMENT OF WORK. 3.4.9 B.When not otherwise provided for (or precluded) by other terms of this contract, the contractor may seek written authorization to replace failed SRA(s) with Ready For Issue SRA(s). When authorized, the procedures set forth in paragraph 3.0 of Section 6.2 of the WEB-BASED COMMERCIAL ASSET VISIBILITY (CAV) STATEMENT OF WORK shall be followed. 3.4.10 Over and Above Repair (OAR). An item sent to the contractor shall be considered to require over and above (OAR) repair effort if the repair required is not the type of repair that would be anticipated as a result of normal Navy operation of the item and is not included in the contract pricing due to the nature or scope of the repair needed for that particular item. Therefore, repair of OAR items may be subject to equitable adjustment. The Contractor shall obtain written concurrence from DCMA for all units determined by the contractor to require OAR effort. All such OAR determinations, including the basis for the determination, the repair required, the proposed price to repair and the DCMA written concurrence, shall be provided by the contractor to the PCO prior to undertaking repair of the item. After receipt of the required documentation, the PCO shall provide the contractor disposition instructions or contractual authority for repair of the item. Any ordered disposal shall be performed by the contractor in accordance with all applicable regulations and DCMA disposal procedures and requirements. 3.5 4.0 PARTS AND MATERIALS 3.5.1 General. The contractor is responsible for supplying all parts and material necessary to perform the required repairs under this contract unless parts or material are specifically identified as Government Furnished Material (GFM). All parts and material used in performance of this contract shall be in accordance with the latest approved revision of applicable drawings and specifications and shall be new in accordance with FAR 52.211-5, Material Requirements, which is incorporated by reference herein. Authorization to use other than new material as defined by FAR 52.211-5 requires written approval from the PCO. In addition, cannibalization must be approved by the PCO. Cannibalization of units that have not been inducted is not typically authorized and requires specific approval by the PCO. 3.5.2 The contractor shall ensure it has access for the duration of this contract to updated drawings and specifications for parts and material required for repairs performed under this contract. Any change to such parts/material drawings or specifications requires Government approval in accordance with the Configuration Management provisions of this Statement of Work. Written approval from the PCO must be obtained prior to any change to the manufacturing source or manufacturing facility for all parts which require source approval, unless the contractor is the Design Control Agent (DCA) (i.e. the entity responsible for maintaining the latest configuration data) for the the contract item. If the contractor is the DCA, the contractor may approve approve changes to manufacturing source or manufacturing facility for all parts, including those which require source approval. Any repairs performed using unapproved changes to such drawings, specifications or manufacturing source or facility are done at the contractor's own risk. If the Government disapproves the requested change, the contractor shall replace any delivered items repaired using such unapproved change. The contractor is not entitled to any equitable adjustment to the contract price or terms based on the Government's disapproval of a requested change to the drawings, specifications or manufacturing source or facility. 3.5.3 Purchased Material Control and Parts Control. The contractor shall establish and maintain a system of control over purchased parts and material. Such controls shall, at a minimum, assure that the parts and and material purchased are in compliance with the requirements of this contract. 3.5.4 Receiving Inspection of Purchased Parts and Material. (1)Purchased items shall be inspected upon receipt at the contractor's facility to assure conformance with all requirements of the applicable drawings and specifications or (2)the contractor shall provide prior to the contract award evidence for Government review and approval of a purchased parts and material system which provides for the inspections to assure conformance with all requirements of the applicable drawings and specifications. Evidence of such inspections of such inspections shall be maintained by the contractor or subcontractor for Government review.The inspection report shall, at a minimum, include a record of all dimensional data (coordinate/positional), material, finish, and process with appropriate pass/fail criteria such as certifications and actual dimensonal readings. 3.5.5 ^^^NOTE^^^PART CANNIBALIZATION IS NOT AUTHORIZED UNLESS SPECIFICALLY APPROVED BY NAVSUP WSS AND THE BDE. 3.5.6 3.6 SOURCE AND LOCATION OF REPAIR SOURCE: 3.6.1 The contractor shall specify the name of the Source/Division performing the work and the actual location where work will be performed. AUDIO CONTROL PANEL ;The Boeing Co.; Company Name , ;MAIL STOP 45-24, P O BOX 3707, Seattle, WA 98124-2207; Address , ;81205; Cage Code inspection will be accomplished on the contractor's equipment 3.7 5.0 CONTRACTOR QUALITY REQUIREMENTS: 3.7.1 Quality Program. The Contractor shall establish, implement, document and maintain a quality system that ensures conformance to all applicable requirements of ISO 9001/ SAE AS9100. The Contractor's quality management system/program shall be designed to promptly detect, correct and prevent conditions that adversely affect quality. 3.7.2 Calibration System Requirements. Contractor shall maintain a calibration system that meets the requirements of ANSI/NCSL Z540.3, ISO-10012-1 or an equivalent calibration program acceptable to the Government. 3.8 6.0 CONFIGURATION MANAGEMENT (CM): 3.8.1 The contractor shall maintain a configuration management plan in accordance with the provisions of NAVSUP WSS configuration management clause NAVICPIA18. (Refer to contract). 3.9 7.0 MARKINGS. 3.9.1 Marking shall be as indicated in the contract when applicable. 3.10 8.0 STORAGE; 3.10.1 The contractor shall provide a proper enclosed warehouse environment for both material items awaiting repair and assets which have been repaired and are awaiting shipment to ensure the items are not damaged while being stored. 4. QUALITY ASSURANCE PROVISIONS - NOT APPLICABLE. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE