Category Bids

OR-FWS SHELDON NWR-RE-KEY HQ

ID- KOOSKIA NFH-OVERHEAD DOOR REPLACE

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 124PSA27Q0027 is issued as a Request for Quotation (RFQ) for replacement of cattle shades. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 238990 The small business size standard is $19.0M. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 124PSA27Q0027 is issued as a Request for Quotation (RFQ) for replacement of cattle shades. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 238990 The small business size standard is $19.0M. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.

The U.S. Army Corps of Engineers, New England District is issuing this Sources Sought Announcement for Construction Services for the replacing the wire ropes and designated associated sheave blocks for the number 1 service gate of the dam at the Franklin Falls Dam in Franklin NH. This announcement is to determine interest, availability and capability of 8(a), HUBZone, Service-Disabled Veteran-Owned, Women-Owned and Small Business concerns for this project. The NAICS code for this procurement is 237990 with a size standard of $22M. The project is planned to be solicited in the Spring of 2027 with construction to begin place in the Spring/Summer of 2027. The estimated construction cost is between $350,000 - $500,000. The project site is the inlet culvert on the lake side of the Franklin Falls Dam in Franklin, NH. Work for this project will likely include, but not be limited to, the following: Replace the existing stainless steel wire ropes that operate the number 1 service gate. Wire ropes must meet the following conditions: Meet US Steel Manufacture Requirements. Shall be 1,085 linear feet of 1� X 6X26 GALV XIP IWRC RRL PLAIN ENDS. The wire rope shall have a minimum breaking strength of 100 tons. The wire rope shall be lubed during the time of manufacture with accepted lubrication. Specification sections 35 01 70.13 and 35 20 16.53 will be included in the solicitation. Wire rope clips and thimbles will be designed by the contractor for this project and must fully conform with ASME B30 standards and proper amount of clips shall be provided for wire rope size and requirements for proper wire rope turnback. Remove and replace the lower sheave block assembly (five total) that is associated with the number 1 service gate. The following will be applicable for these assemblies: Sheave pins and bushings. Site plates, hitch plates, keeper plates Tap bolts, pipe separator and bolts Hitch pins Finishes and paint Contractors shall install the wire ropes and lower sheave blocks according to appropriate industry standards for Load Handling Equipment of this type and configuration. Interested firms should submit a capabilities package to include the following: business classification (i.e. HUBZone, small business, etc.), as well as qualifications and experience in performing the work components stated above. Please include at least two specific examples of the firm�s experience performing the work requirements stated above. The projects must have been performed within the last seven years. Please indicate the team subcontractor(s) (if any), including their prior experience and qualifications, which will be used to support the offeror�s effort, and their experience must also have been performed within the last seven years. Proof of bonding capability is required. Responses are limited to twenty pages. Responses are due by 25 November 2026 at 1:00 PM Eastern. Responses should be emailed to: Distephano Marcellus � Distephano.Marcellus@usace.army.mil Phone Contact: (978) 318-8890 Interested firms shall provide the above documentation in one original form and one copy. The Government will not pay for any material provided in response to this market survey nor return the data provided. This notice is for information purposes only and is not a request to be placed on a solicitation mailing list nor is it a Request for Proposal (RFP) or an announcement of a solicitation. The results of this survey will be considered to be in effect for a period of one year from the date of this notice. Government Agency URL: www.nae.usace.army.mil Government Agency URL Description: New England District, Corps of Engineers

This Sources Sought is for market research purposes only � it is not a Request for Proposal, Request for Quote, or Invitation for Bid. There is no commitment by the Government to issue a solicitation, make awards, or pay for respondents� expenditures made in response to this notice. Interested vendors are responsible for monitoring this notice for any subsequent amendments. All submissions become government property and will not be returned. Any solicitation issued resulting from this notice will be in a separate announcement. The purpose of this notice is to afford Industry the opportunity to submit company profiles with capabilities statements, provide acquisition strategy feedback, and express interest in the potential procurement. The U.S. Army Corps of Engineers (USACE) Europe District is considering issuing a solicitation for a new (not a reprocurement) Design-Build, Single Award Task Order Contract (DB SATOC), for construction projects in Baden-Wurttemberg and Rheinland-Pfalz. The SATOC would have a five-year ordering period with a maximum capacity of $49M or Euro equivalent, and task orders for construction projects may be between �100,000 and �5,000,000each. Task Orders are anticipated to be awarded in Euros. A solicitation may be publicized around first quarter of 2027, with the possibility of a preproposal conference and/or site visit, and contract award around third quarter of 2027. The solicitation may use the two-phase design-build procedures of RFO FAR 36, RFO FAR 16.5, RFO FAR 15, and other regulations and supplements. PROJECT DESCRIPTION The DB SATOC is intended to provide a quick response for facility repair, renovation, conversion, alteration, additions, construction, and the procurement/installation of equipment for minor construction, in support of the US Army Garrisons in the states of Baden-Wurttemberg and Rhineland-Pfalz in Germany. Similar to a Job Order Contract (JOC), this new contract vehicle would give the Government and Contractor opportunities for joint scoping. Unlike a JOC, however, there would not be a unit price book, and task orders may require designs. CAPABILITIES STATEMENT Vendors interested in the potential procurement shall submit a brief capabilities statement in English as one PDF or Word File and no more than six pages. The capabilities statement shall include the following: 1. Company name, address, point of contact (POC), and email address. Include Commercial and Government Entity (CAGE) code and Unique Entity Identifier (UEI) number from the company�s SAM registration. 2. Capability to perform contracts of similar magnitude and complexity. Describe projects completed within the past six years, if work was performed as a prime or subcontractor, and include the location, customer, and project value in local currency. 3. Capability for bonding, such as name of surety, and single and aggregate contract amounts. 4. Feedback, if any, on the contemplated acquisition strategy. Email capabilities statement to the following and reference W912GB271CUB in the subject line of the email: Melodie Clare at melodie.e.clare@usace.army.mil and Jordan Quantock at jordan.m.quantock3@usace.army.mil. Submissions will be shared with the Government project delivery team but otherwise will be held in strict confidence. No feedback will be provided to the respondents regarding their submission. If you have any questions, contact the POCs above by email. Note: Any solicitation issued resulting from this notice will be in a separate announcement. A company must be registered and active in SAM to be considered for contract award. Further instructions and information can be found at https://sam.gov/content/entity-registration.

The U.S. Army Corps of Engineer (USACE), Philadelphia District (NAP), anticipates a requirement for the Chesapeake and Delaware (C and D) Canal Building Replacement Project. The Chesapeake and Delaware or Canal connects the Delaware River to the Chesapeake Bay and Port of Baltimore. The canal is maintained from a field office located in Chesapeake City Maryland. This office consists of multiple buildings and shops that are essential to the continued operation of the canal. Several of these building have reached the end of their lifecycle and need to be replaced. This project will include the demolition and consolidation of the mechanics shop, bridge shop and storage buildings. A new building will be constructed to sever as a replacement of the buildings that are being removed. The building will be located along the east side of the project site. The building dimensions will be 60 feet x 150 feet with a clear ceiling height of 20 feet. The building will have a gable roof with the ridge running parallel to the length of the building. A pre- engineered metal building with tapered columns will be used. The columns will be enclosed with steel stud framing and gypsum board in the office areas. Vehicle and workshop areas will have propane fired heating. Office areas will be provided with air conditioning. The electrical service will be upgraded if necessary to provide power to the new building. The building will be connected into backup power from the existing diesel generator. Work will consist of the following activities: A.) The project scope includes all work required to design and construct a 9,000 square foot maintenance building in accordance with the Request for Proposal documents including the demolition of the four existing buildings and propane storage tank currently located at the site. Utilities serving each of the buildings being demolished must be demolished to the extents defined in section 02 41 00 Demolition. Requirements stated in this contract are minimums. Innovative, creative, and life cycle cost effective solutions, which meet or exceed these requirements are encouraged. Further, the Offeror is encouraged to seek solutions that will expedite construction (panelization, pre-engineered, etc.) and shorten the schedule. The intent of the Government is to emphasize the placement of funds into functional/operational requirements. Materials and methods must reflect this by choosing the most economical type of construction allowed by code for this occupancy/project. B.) The maintenance building must be provided with Heating, Ventilation, and Air Conditioning (HVAC), electrical, communications, fire protection, life safety, plumbing systems, waste oil storage, and compressed air systems. C.) A 3,000 square foot storage shed must be designed and constructed at the location identified on the site plan. The shed design must include power and lighting. D.) The scope of work also includes civil site work consisting of site paving, installation of stormwater drainage, connection into the domestic water utility, sanitary sewer utility connection for the new maintenance building, connection of existing sanitary sewer lines into the towns sanitary sewer utility, a vehicle wash area and fire hydrants. Site work is shown in Appendix A. Site electrical work must be completed to provide the maintenance building and storage shed with power fed from the existing switch gear shed. Site telecommunications work must be completed to provide the maintenance building with connection into the existing telecommunications utilities. E.) A propane storage tank must be provided onsite and be connected to the new maintenance building and the existing propane fired generator. The estimated period of performance will be 730 calendar days. The estimated magnitude of this project is between $5,000,000 and $15,000,000. The North American Industrial Classification System (NAICS) code is 236220 Commercial and Institutional Building Construction, with an SBA Size standard of $45.0M.

Stated in the notice: The estimated magnitude of this project is between $5,000,000 and $15,000,000.

PRE-SOLICITATION SYNOPSIS NOTICE ONLY: THE SOLICITATION WILL BE AVAILABLE ON OR ABOUT NOVEMBER 30, 2026 AT HTTPS://SAM.GOV/. THE SOLICITATION NUMBER IS N6945027R0008, FOR THE DESIGN-BID-BUILD (DBB) CONSTRUCTION PROJECT P233 AIR TRAFFIC CONTROL TOWER AND FLIGHT SIMULATOR TRAINING FACILITY AT KEESLER AIR FORCE BASE (AFB), BILOXI, MISSISSIPPI PROJECT TITLE: DESIGN BID BUILD (DBB) CONSTRUCTION PROJECT, P233 AIR TRAFFIC CONTROL TOWER AND FLIGHT SIMULATOR TRAINING FACILITY AT KEESLER AIR FORCE BASE (AFB), BILOXI, MISSISSIPPI PSC: Y1BA (Construction of Air Traffic Control Towers) NAICS: 236220 � Commercial and Institutional Building Construction THIS IS NOT A REQUEST FOR PROPOSALS OR AN INVITATION FOR BID. NO CONTRACT WILL BE AWARDED FROM THIS ANNOUNCEMENT. NO REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH PROVIDING INFORMATION IN RESPONSE TO THIS ANNOUNCEMENT OR ANY FOLLOW-UP INFORMATION REQUESTS. No telephone calls will be accepted requesting a bid package or solicitation. There is no bid package or solicitation currently available. In order to protect the procurement integrity of any future procurement that may arise from this announcement, information regarding the technical point of contact will not be given and no appointments for presentations will be made. Description: This acquisition may result in the award of a Design Bid Build (DBB) Firm Fixed Price (FFP) Construction contract of an Air Traffic Control Tower and Flight Simulator Training Facility at Keesler AFB, Mississippi. This project will construct a new Air Traffic Control Tower and adjacent Flight Simulator Facility. Project includes all utilities, site improvements, pavements, elevator, backup generator, and all necessary work for a complete and usable facility. Project will comply with Department of Defense Antiterrorism/Force Protection requirements per Unified Facilities Criteria 4-010-01 and Unified Facilities Criteria 3-600-01. A Bid Option is included for the demolition of Buildings 4209 and 4230, to include site grading and the installation of a security fence. Demolition in this bid option to only occur after the new Air Traffic Control Tower is complete. The estimated Period of Performance is 1,219 calendar days. The best value continuum source selection process to be used for this acquisition is the Best Value Tradeoff process as described in FAR 15.103-1. The Best Value Tradeoff process is appropriate and permits evaluation of proposals based on price competition, technical merit, confidence assessment and other factors; permits impartial and comprehensive evaluation of offeror proposals; permits discussions if necessary; and ensures selection of the source whose performance provides the best value to the Government. A sources sought notice was posted to sam.gov on October 27, 2026, requesting small business industry interest and capability statements. Based on responses from the notice it was determined that the requirement should be issued as Full and Open competition. The solicitation will be a negotiated DBB acquisition. Proposals will be solicited in a one-phase submission for a single solicitation. The solicitation will utilize source selection procedures, which require offerors to submit a technical proposal, past performance and experience information, and a price proposal for evaluation by the Government. Award will be made to the offeror whose total price and technical proposal offers the best value to the Government. Competition Requirements: Unrestricted basis, under full and open competition. Procurement Method: FAR Part 15, Contracting by Negotiation. Type of Contract: Firm-Fixed Price The NAICS code for this construction solicitation is 236220 with a size standard of $45,000,000. Project Magnitude is between $20,000,000 and $50,000,000. This is a new procurement. It does not replace an existing contract. No prior contract information exists. A Site Visit will be held for those offerors who choose to participate (exact date and time will be specified in the solicitation). Proposals will be due no earlier than 30 days after the solicitation is released (exact date and time will be specified in the solicitation). This will be an electronic solicitation, which can be downloaded from Sam.gov Opportunities at https://sam.gov/. The solicitation will be available at this site no earlier than 15 days after this pre-solicitation notice is posted. Offerors are responsible for checking the Sam.gov website for the solicitation and any subsequent amendments that may be issued. NO CONTRACT AWARD WILL BE MADE TO ANY CONTRACTOR THAT IS NOT REGISTERED OR IN THE PROCESS OF REGISTERING WITH THE SYSTEM FOR AWARD MANAGEMENT (SAM). PLEASE VISIT THE SAM WEBSITE AT https://www.sam.gov FOR INSTRUCTIONS ON HOW TO REGISTER.

Stated in the notice: Project Magnitude is between $20,000,000 and $50,000,000.

This project will construct a multi-story facility with a high-bay test laboratory, two low-bay test labs, and flexible-use light lab areas. Primary facilities include structural steel framing, concrete foundations and structural slab, elevated floor slabs, masonry and insulated metal panel exterior skin, built-up roofing system, HVAC, plumbing, and fire protection systems.

In accordance with FAR 5.101(b)(1)(i), this is a 15 day presolicitation notice that GSA will solicit contractors to refresh of the fourth-floor kitchenette of the Weinberger Courthouse in San Diego, CA. This effort includes isolating an electrical circuit and replacing existing cabinet doors and associated hardware, as well as the installation of new countertops and backsplash material.

Posting Amendment 0006 to provide official RFI Responses, updated Solicitation Documents, extend the Proposal Due Date, and other official information.

The purpose of Amendment 0005 is to provide last remaining RFI responses. This is a non-personnel services contract to perform inspections on Department of Defense fuel tanks. This service entails removal, disposal, transfer of remaining fuel, tank cleaning, replacing wiper seals, and providing an aboveground storage tank (AST) Inspection on tank(s) listed in Attachment B.

Repair Mechanical Systems IDIQ (FY 27-32)

Modification ** 11/2/26- Add Pictures Modification** 10/29/2026- Add Pre-Bid Meeting Minutes Modification** 10/27/2026 Pre-Bid Meeting will be held on Thursday Oct. 29, 2026- 8:00 AM CST, prior to the site visit to begin. If you are not able to attend the site visit but wanting to attend the Pre-Bid meeting, email Mrs. Buck at hbuck@bop.gov for an invite on TEAMS. ** Instructions to Offerors attached** modification 10-20-2026 **Clarification** Clarification for proposal at the bottom of this page. 10-19-2026 **Update of NCIC due date**Friday, October 23, 2026 This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Modification for site visit date only** Thursday Oct. 29, 2026- 8:00 AM CST Solicitation number 15BNAS27Q00000002 is issued as a Request for Quote (RFQ). The Federal Bureau of Prisons (FBOP), Federal Correctional Institution (FCI) Three Rivers, anticipates the issuance of a solicitation for the award of a firm-fixed-price construction contract for a project titled Replace Generators, Transformers, and Electrical Infrastructure, for FCI Three Rivers located at 1700 HWY 72 WEST, Three Rivers, TX 78071. This acquisition [is] set-aside for 8a small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. This announcement constitutes as the only solicitation; quotes are being requested and a written solicitation is issued (see attached) . You are required to provide all pages of the written attached solicitation with your complete quotation. Solicitation Number: 15BNAS27Q00000002 and is issued as a Request for Quotation (RFQ) A statement that the solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2026-1, Effective Date March 13, 2026. This is a 100 percent 8a small business set-aside. The Period of Performance for this project will be 450 Calendar Days from the issuance of the Notice to Proceed. The provision at 52.212-1, Instructions to Offerors-Commercial Products and Commercial Services, applies to this acquisition and a statement regarding any addenda to the provision. All quotes will be evaluated based on price and past performance. All quoters are required to submit a complete copy of their Offeror Representations and Certifications-Commercial Products and Commercial Services, with its offer. Clause at 52.212-4, Contract Terms and Conditions-Commercial Products and Commercial Services, applies to this acquisition. SCOPE OF WORK: The contractor will provide all necessary labor, materials, equipment, tools, and incidentals required to Replace Generators, Transformers, and Electrical Infrastructure, for FCI Three Rivers. See the attached Statement of Work for further detailed requirements. The North American Industrial Classification System (NAICS) code applicable to this requirement is 236220 (Commercial and Institutional Building Construction) with a corresponding small business size standard of $45.0 million average annual receipts for the firms preceding three fiscal years. The solicitation will only be distributed soley through the Contract Opportunity web-site at https://www.sam.gov. Hard copies of the solicitation will not be made available. The website provides download instructions for documents. All future information about this solicitation, including any amendments will also be distributed soley through this website. Interested parties are responsible for continuously monitoring this website to ensure that they have the most recent information about this proposed contract action. IMPORTANT: Any contractor interested in doing business with the Federal Bureau of Prisons must be registered in https://www.sam.gov. In order to qualify for award, your business size metrics information entered in your SAM registration will be reviewed by the Government to confirm your size business size meets the 8a small business size standard requirement and the U.S. Small Business Administration. All quoters are urged to double check their SAM registration and U.S. Small Business Administration and update as necessary, including the size metrics information. SITE VISIT: An organized site visit has been scheduled for Thursday - 10/29/2026 at 8:00am CST with Mr. Corey Villarreal, at FCI Three Rivers, HWY 72 WEST, Three Rivers, TX 78071. Participants are asked to meet in the lobby area. Attendance is not mandatory but highly advised. All NCIC paperwork must be submitted by 4:00?PM EST on Friday, October 23, 2026 to cvillarreal@bop.gov. Late submissions will not be accepted. Access to government property is subject to approval at the Government�s discretion. Please plan accordingly and ensure paperwork is completed ahead of time. NCIC form is Attachment 10. Questions: All questions are due November 6, 2026 by 4:00 PM EST to hbuck@bop.gov. All answers to questions will be posted on SAM.gov only. SUBMISSION OF QUOTES: All quotes will be submitted electronically via email to hbuck@bop.gov no later than November 30, 2026 at 11am EST. Clarification -- 10-19-26 Electronic copies of each quote shall be compatible with the following software products: Adobe Acrobat Reader 11 and Microsoft Office Suite 2016. Narrative portions of the proposal shall be in Adobe Acrobat portable document file (pdf) searchable text format. The Offeror shall not embed sound or video (e.g., MPEG) files into the proposal files. Electronic files shall be clearly identified for each volume, section, and item. Also see attached example of Cost Summary Spreadsheets- these can be used or something in the like format. PROPOSAL SUBMISSION REQUIREMENTS 1. TECHNICAL PROPOSAL Provide sufficient detail to demonstrate your approach to performing the required construction, including: Technical/Management approach Anticipated construction schedule with milestones Key personnel Quality control and safety approach Assumptions impacting performance 2. PRICE PROPOSAL Provide a complete price proposal, including: Total proposed price Price breakdown (labor, Material, Equipment) (see attached Sample) Basis of estimate Please submit all pages of the solicitation document along with your proposal and the following: 1) Technical Proposal 2) Price Proposal 3) Signed, completed Standard Form 1442. 4) Completed Representations and Certifications.

The U.S. Army Corps of Engineers (USACE), Omaha District (NWO) intends to pursue award of a $95M firm-fixed-price Tenant Renovation of Secure Spaces (TRSS) Multiple Award Task Order Contract (MATOC) to Defense Attache Office Renovation in support of the Defense Intelligence Agency (DIA) mission assignments OCONUS. The services are requested to meet the Defense Intelligence Agency (DIA) OCONUS specialized security upgrades in US facilities in support of a unique Defense Agency program. Project work is for overseas office renovation work in restricted core areas of facilities. Work includes secure material shipping to overseas locations from CONUS location, and restricted access requirements. On site work needs to be done by us citizens with top secret clearance. Please refer to the attached Sources Sought Notice for further details.

THIS IS NOT A SOLICITATION. THIS IS A REQUEST FOR INFORMATION ONLY. SEE ATTACHMENTS FOR FULL DETAILS. The anticipated project includes, but is not limited to: � Furnishing and installing a large roll-up door within an existing non-load-bearing concrete masonry unit (CMU) wall. � Demolition, cutting, removal, framing, finishing, and related work necessary to create the new door opening. � Relocation and/or modification of affected utilities, including electrical power, compressed air, and water lines. � Relocation of an existing air-conditioning unit and associated ductwork to accommodate installation and operation of new equipment. � Restoration of affected interior and exterior finishes. � Coordination of work in an operational facility and compliance with installation access, safety, environmental, and utility-outage requirements. See the attached questionnaire for full details available at this time.

Update 11/10/2026: QA_11.10.2026.pdf posted to Attachments. Update 11/03/2026: QA_11.3.2026.pdf posted to Attachments. Invitation for Bids (IFB) for Construction Project, AK FLAP ANCHORAGE 2021(1), Far North Bicentennial Park Enhancements. The IFB, plans, and physical data are posted under Attachments/Links. Note: This project is being advertised as Full and Open with HUBZone preference. The Interested Vendor List on SAM.gov is viewable only by users who are linked to an entity with an active Unique Entity Identifier (UEI) and hold an assigned role (such as Contract Opportunities Administrator, Data Viewer, or Data Entry). The Federal Government does not maintain or provide a separate plan holders list. If you need assistance, go to https://www.fsd.gov/gsafsd_sp.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 124PCA27Q0008 is issued as a Request for Quotation (RFQ) for Epoxy Floor Repairs. The project consists of providing all labor and materials to re-coat floors. Floor area to be recoated is approximately 2700 SF with approximately 450 linear feet of cove base. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 238330 Flooring Contractors. The small business size standard is $19.0M. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 124PCA27Q0008 is issued as a Request for Quotation (RFQ) for Epoxy Floor Repairs. The project consists of providing all labor and materials to re-coat floors. Floor area to be recoated is approximately 2700 SF with approximately 450 linear feet of cove base. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 238330 Flooring Contractors. The small business size standard is $19.0M. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.

This is a combined synopsis/solicitation for commercial construction prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation; quotes are being requested, and a separate written solicitation will not be issued. Solicitation number 1240LU27Q0001 is issued as a Request for Quotation (RFQ) for the Powell Duplex Improvements on the Nez Perce � Clearwater National Forest. The project consists of removing and replacing the existing roof(s), water damaged Structurally Insulated Panels (SIP), some structural members in the roof and walls of an existing residential duplex. The existing demolished materials shall be disposed of off Forest Service lands in accordance with all State and federal laws. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification System Code is 236118. The small business size standard is $45 Million. This acquisition is a total Small Business set-aside. All responsible sources may submit a quotation which will be considered by the agency. Amendment 01 - Summary: Due date for quotes is extended. Period of Performance is changed.

This project includes the replacement of 4� asbestos cement pipe (abandoned in place) with 4� HDPE water main and associated valves and connections to laterals. The work includes; Installation of 4450 linear feet of 4� HDPE pipeline, most of which will be shallow bury or laid on cleared ground and covered with imported fill from a government source. Cover an additional 1150 linear feet of existing pipeline with imported fill from a government source. Installation of 2 combination air-vacuum valves with utility boxes. Installing associated valves, daylight drains, and pumpout drains; and connecting to existing lateral mains and services.

This project includes the replacement of 4� asbestos cement pipe (abandoned in place) with 4� HDPE water main and associated valves and connections to laterals. The work includes; Installation of 4450 linear feet of 4� HDPE pipeline, most of which will be shallow bury or laid on cleared ground and covered with imported fill from a government source. Cover an additional 1150 linear feet of existing pipeline with imported fill from a government source. Installation of 2 combination air-vacuum valves with utility boxes. Installing associated valves, daylight drains, and pumpout drains; and connecting to existing lateral mains and services.

I. PURPOSE AND DISCLAIMER**********************The U.S. Army Corps of Engineers (USACE), Chicago District, is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support the requirement for upgrading our Commercial Gear Backup Power (CGBP) and associated control system at our electronic fish barrier located in Romeoville, Illinois. We are seeking to identify qualified Small Business concerns (including 8(a), HUBZone, SDVOSB, WOSB, and Small Business Joint Ventures/Teaming Arrangements) and Other-Than-Small Business concerns capable of performing this requirement. The intention is to procure these services on a competitive basis.**********************BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES (IN FULL OR IN PART) OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. All Small Business Set-Aside categories will be considered. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.**********************DISCLAIMER**********************THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMMATION PERTAINING TO THIS REQUIREMENT. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought.********************************************II. COMPREHENSIVE TECHNICAL DESCRIPTION and PROJECT SCOPE********************************************The Chicago Sanitary and Ship Canal (CSSC) Electric Dispersal Barrier facility requires a complex industrial electrical power generation, backup power, and automation and control system modernization project. This system is a critical component of the federal effort to prevent the movement of invasive aquatic species between the Great Lakes and Mississippi River basins. **********************Specifically, USACE needs to upgrade the backup generator and switchgear control systems at Permanent Barrier 1 (PB1) to correct unreliable operation caused by deficiencies in the original design, configuration, and wiring. The project requires replacing generator controllers, modernizing breaker controls and communications, and rebuilding the control software and operator interfaces to improve reliable operation on utility and backup power. Work will require testing, operator training, and a phased changeover to maintain continuous barrier operations. Work will be performed at an active, mission-critical facility requiring careful coordination with ongoing operations, planned equipment outages, and system changeovers to maintain operational readiness and minimize disruptions. A critical requirement is the integration of new equipment into an active industrial facility while protecting existing operations. The anticipated work may include engineering, design review, equipment upgrades and replacement, control system programming, integration, testing, and commissioning of interconnected electrical and industrial automation systems. ******************************************************************TECHNICAL CAPABILITIES:******************************************************************The project requires specialized expertise in: a) generator synchronization and load management, b) switchgear automation, c) protective relaying, d) programmable logic controllers (PLCs), e) human-machine interfaces (HMIs), industrial communications, and associated monitoring and data management systems.**********************Contractors must possess the technical capabilities necessary to work with the existing systems and integrate new equipment while maintaining compatibility and functionality. The existing facility incorporates Rockwell Automation ControlLogix PLCs, FactoryTalk View SE, FactoryTalk Transaction Manager, Microsoft SQL Server, Basler generator synchronization and control equipment, Schweitzer Engineering Laboratories (SEL) protective relays and RTAC equipment, and DEIF generator controllers. ATTACHMENT NOTICE: Interested parties must carefully review Attachment 1 (Equipment_SOW.xlsx ??? PB1 Equipment Modernization and SOW Matrix) attached to this notice in PIEE, the DoW Procurement Integrated Enterprise Environment, which details the specific equipment removals, modifications, additions, hard-wired control conversions, I/O transitions, and as-built drawing updates (across four separate contractor drawing sets) required under our anticipated scope.**********************Contractors must demonstrate their capability of obtaining a specialized Master Systems Integrator (MSI) or Industrial Automation and Control Systems (IACS) engineering firm to perform any needed engineering, programming, integration, testing, commissioning, and troubleshooting of the complex interconnected industrial control systems.**********************Contractors must demonstrate their ability to obtain qualified personnel. Qualified personnel include Electrical Generating Systems Association (EGSA) certified technicians or personnel possessing equivalent documented qualifications to support generator-related engineering, design reviews, integration, testing, and commissioning. If proposing to use equivalent, provide what documentation your firm considers as equivalent for USACE consideration.**********************The contractor must possess the technical and organizational capabilities to execute phased modifications, coordinate authorized shutdowns and system changeovers, implement temporary control arrangements where necessary, perform pre-commissioning and acceptance testing, and develop contingency measures to minimize operational disruptions and maintain the safety, reliability, and continuity of existing barrier operations.**********************III. REQUESTED INFORMATION FROM INTERESTED PARTIES********************************************Interested firms are invited to submit a Capability Statement (not to exceed 10 pages) addressing the following four (4) sections after reviewing the technical capability narrative above and Attachment 1 (Equipment_SOW.xlsx):SECTION A: ADMINISTRATIVE AND BUSINESS SIZE********************************************1. Company Name, Address, Point of Contact, telephone number and email, CAGE Code, and Unique Entity Identifier (UEI).**********************2. Business Size under NAICS 238210 ($19.0M Size Standard) and all applicable socioeconomic designations.**********************3. If proposing as a Small Business, confirm your understanding of FAR 52.219-14 (Limitations on Subcontracting) and your ability to perform at least 25% of the cost of contract performance (excluding the cost of materials) with your own organization or similarly situated small business entities. **********************4. Should this requirement be solicited as Full and Open Competition, other-than-small-business offerors will be required to submit an acceptable Small Business Subcontracting Plan in accordance with RFO 19.109 and FAR 52.219-9, as applicable. All respondents are asked to: a) Describe your experience meeting small business subcontracting goals on comparable construction or modernization projects, b) Identify potential subcontracting opportunities for small businesses within the attached scope of work, c)Provide preliminary estimated subcontracting percentages by socioeconomic category (e.g., WOSB, SDVOSB, HUBZone, SDB), and d) Identify anticipated challenges and strategies to maximize small business participation during execution.**********************SECTION B: TECHNICAL AND INTEGRATION EXPERIENCE********************************************1. TECHNICAL CAPABILITIES. Tailored capability statements addressing the particulars of this effort under the technical capabilities section above, with appropriate documentation supporting claims of organizational and staff capability. Detail what specific technical skills does your company possess which ensure capability to perform the tasks. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements, as well as experience of managing similar teams in the past.********************2. EQUIPMENT LIST REVIEW: Confirm your firm has reviewed Attachment 1 (Equipment_SOW.xlsx) and describe up to three (3) comparable projects executed within the past seven (7) years involving turnkey switchgear/generator control remediation, hard-wired relay conversions, and multi-vendor integration (Rockwell ControlLogix, SEL Relays/RTAC, Basler, and FactoryTalk View SE). Clearly delineate whether experience is based upon the prime, or any proposed subcontractors.**********************3. CERTIFICATIONS AND QUALIFICATIONS: Confirm your proposed teams compliance with the EGSA certification requirement or identify the equivalent documented qualifications your personnel possess to support this scope. Identify whether your proposed lead personnel hold: (a) Control Systems PE Licensure, (b) EGSA Certification, or (c) CSIA/Rockwell Integrator Certification.**********************4. PHASED CUTOVER AND FAT: Describe your firms capability to perform Factory Acceptance Testing (FAT), simulation prior to site delivery and execute a phased cutover at an active 24hr, 7day a week facility without unplanned outages.**********************SECTION C: COMMERCIAL SOLUTIONS AND LEAD-TIME********************************************1. COMMERCIAL SOLUTIONS: Based on your review of Attachment 1, identify what commercial solutions or minor modifications are available in the marketplace to meet these functional requirements.**********************2. ESTIMATED LEAD-TIME: Provide an estimated lead-time required to procure the necessary hardware components and complete the on-site upgrades, testing, drawing updates, and commissioning.********************************************IV. INSTRUCTIONS FOR RESPONSE SUBMISSION**********************Please submit capability packages electronically through the PIEE Solicitations Portal or via email to the designated Point of Contact by December 2, 2026, at 1:00 PM CST. Your response to this Sources Sought, including any capabilities statement, shall be electronically submitted to the Contract Specialist, Jane Doe, in either Microsoft Word or Portable Document Format (PDF). All data received in response to this Sources Sought that is marked or designated as corporate or proprietary will be fully protected from any release outside the Government.**********************The Government will evaluate market information to ascertain potential market capacity to: 1) provide services consistent, in scope and scale, with those described in this notice and otherwise anticipated; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; 3) implement a successful project management plan. **********************All questions must be submitted to the contract specialist.

INTRODUCTION The Department of Veterans Affairs (VA), Veterans Health Administration (VHA), Program Contracting Activity Central (PCAC) anticipates soliciting bids and subsequently awarding a single firm-fixed-price contract for the design-bid-build EHRM Training and Administrative Space Construction project at the St. Louis VA Health Care System (VAHCS) John Cochran campus located at 915 North Grand BLVD, St. Louis, MO 63106. PROJECT DESCRIPTION The VA Saint Louis Health Care System John Cochran Division requires a construction contractor to perform upgrades in support of the Electronic Health Record Modernization (EHRM) program. The construction area is located on the first floor of Building 2 and includes both training and administrative spaces. This project includes the execution of Phases 2, 3, and 4 of the associated design plans. Phase 2 addresses the North Training Rooms (Rooms 139, 140, 141, 142), totaling approximately 2,000 square feet. Work includes upgraded power and data infrastructure and new flooring and wall finishes. Phase 3 addresses the South Training Rooms (Rooms 126, 127, 128), totaling approximately 1,800 square feet. Work includes upgraded power and data infrastructure and new flooring and wall finishes. Additionally, Phase 3 includes the renovation of a 130-square-foot breakroom, with new floor and wall finishes, casework, a new sink, and a cold-water tie-in for an ice machine. Phase 4 addresses multiple areas: renovation of an approximately 1,400-square-foot corridor with new floor and wall finishes; upgrades to two offices (approximately 150 square feet each) with upgraded power and data infrastructure and new flooring and wall finishes; and upgrades to an existing data closet, including new floor and wall finishes, installation of an additional server rack with associated equipment, and replacement of the existing mini-split HVAC unit. Note: Phase 1 is excluded from this scope, as it was completed under a separate contract. Note: All power and data drops originally indicated as floor-mounted shall now be wall-mounted, as shown on revised drawings EP101 and TN101. Installation must match these updated sheet details; no floor-mounted outlets are permitted. ADMINISTRATIVE The solicitation will be issued as an Invitation for Bids (IFB) conducted in accordance with FAR part 14 and will be evaluated in accordance with the procedures listed in the solicitation. The solicitation will be issued as a total Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside. Offers received from other than SDVOSB concerns will not be considered. The applicable North American Industry Classification System (NAICS) code is 236220 with a size standard of $45.0 million. The solicitation will be issued in early to mid-October 2026. The period of performance is approximately 150 calendar days from the issuance of the notice to proceed. In accordance with VAAR 836.204, the magnitude of construction is between $250,000 and $500,000. This notice is not a request for competitive offers. All questions must be submitted in writing to the issuing office via email to Amanda.Webster@va.gov. Telephone calls will not be accepted.

Stated in the notice: In accordance with VAAR 836.204, the magnitude of construction is between $250,000 and $500,000.