Category Bids

Due to a transmission error, the solicitation document has been manually replaced, this amendment describes the changes in the new document.

Project No. 583-22-106 - Replace Electrical Panels & Expand Distribution

The Federal Bureau of Prisons (FBOP) herein issues solicitation 15BBNF27R10900002 for the award of a firm-fixed-price construction contract for a project entitled Replace Treadway Roofs at the Federal Medical Center (FMC) Lexington, located in Lexington, Kentucky. FMC Lexington is a federally owned facility located at 3301 Leestown Rd., Lexington, KY 40511. The project consists of the following: The Federal Bureau of Prisons (FBOP), Federal Medical Center Lexington, Kentucky, intends to award a single contract to a responsible entity to provide all labor, materials, equipment, tools, transportation, supervision, and disposal services required to remove and replace the existing 9,500 sq. ft. roofing system. This includes replacing 20% damaged plywood sheathing, 100% fascia boards , and removal of Dormers. Removal of box gutters with associated downspouts. All work should be performed safely, of high quality, and with minimal disruption to FBOP operations. The facility will remain occupied throughout construction. Contractor is required to attend a pre-work meeting in order to coordinate and plan with the on-site staff prior to the day of work. All work shall comply with local, state, and federal regulations. Access to the specifications and drawings attachments will require an active https://sam.gov vendor registration (log in) AND may require a specific role or domain linked to your registration. If you encounter problems requesting access to these documents, please contact the Federal Service Desk at 866-606-8220. Interested bidders must be registered in the System for Award Management (SAM) at https://sam.gov. The North American Industrial Classification System (NAICS) code applicable to this requirement is 238160 (Roofing Contractors) with a corresponding small business size standard of $19 million. The estimated magnitude of the project lies between $500,000 and $1,000,000 (NOTE: This range is not meant to imply that the project has necessarily been estimated/budgeted to the maximum of the selected range. It merely conveys that the estimate/budget lies somewhere within that range.) The solicitation will be distributed solely through the Contract Opportunity website at https://sam.gov. Hard copies of the solicitation will not be made available. The website provides download instructions. All future information about this solicitation, including any amendments, will also be distributed solely through this website. Interested parties are responsible for continuously monitoring this website to ensure that they have the most recent information about this proposed contract action. IMPORTANT: Any contractor interested in obtaining a contract award with the Federal Bureau of Prisons must be registered in the System for Award Management (SAM) at https://sam.gov. If you have questions about SAM, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org. This is a 100 percent small business set-aside. You must be registered in www.sam.gov as a small business (see FAR provision 52.219-1 in the Representations & Certifications section of your www.sam.gov registration). Pre-Proposal Site Visit (See Instructions to Bidders): (b) An organized site visit has been scheduled for November 18, 2026. (c) Participants will meet at 3301 Leestown Rd., Lexington, KY 40511.

Stated in the notice: The estimated magnitude of the project lies between $500,000 and $1,000,000 (NOTE: This range is not meant to imply that the project has necessarily been estimated/budgeted to the maximum of the selected range.

****SOURCES SOUGHT FOR MARKET RESEARCH PURPOSES ONLY**** This announcement seeks information from industry which will be used for preliminary planning purposes. No proposals are being requested or accepted with this announcement. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT SHALL BE AWARDED FROM THIS SYNOPSIS. NO SOLICITATION, SPECIFICATIONS OR DRAWINGS ARE AVAILABLE AT THIS TIME. 1. AGENCY: United States Army Corps of Engineers (USACE) Latin America and Caribbean District (SAA) 2. NAICS: 236220 - Commercial and Institutional Building Construction 3. PLACE OF PERFORMANCE: Peru 4. ACQUISITION INFORMATION: The U.S. Army Corps of Engineers (USACE), Latin America and Caribbean District (SAA), is issuing this Sources Sought announcement as a means of conducting market research to identify parties having an interest in and the resources to support a potential future design-build construction project at the Callao Naval Base, Lima, Peru. The result of this market research will contribute to determining the method of procurement. Estimated Magnitude of Construction: Between $25,000,000 and $50,000,000. Performance Period: 540 days after Notice to Proceed. Anticipated Award Date: Fiscal Year 2027 Quarter 3 Small Business Programs: In accordance with FAR 19.000(b)(1)(ii), the Procuring Contracting Officer (PCO) has elected not to apply FAR Part 19 (Small Business Programs) to this overseas procurement. Consequently, small business set-asides will not be utilized for this project in Peru. However, all responsible sources�including both U.S. concerns (large and small) and foreign entities�are encouraged to submit responses to this Sources Sought notice. 5. ANTICIPATED ACQUISITION STRATEGY: The acquisition strategy for this requirement will be determined based on the responses to this Sources Sought notice and other market research. The Government is considering several compliant acquisition pathways to ensure the successful delivery of this complex Design-Build project in Peru. All interested firms are strongly encouraged to submit a comprehensive capabilities statement, as the information received will be critical in determining the final method of procurement. The primary anticipated strategy is a Two-Phase Design-Build procurement under the authority of FAR Part 36.3. In this scenario, the Government would issue a public Phase 1 solicitation requesting offeror qualifications. Based on these qualifications, the Government would down-select the most highly qualified firms (typically no more than five) who would then be eligible to compete in Phase 2 and submit detailed technical and price proposals. However, based on the unique challenges of performing complex construction in Peru, the Government is also considering the following alternative strategies: Option 1: Limited Competition under FAR Part 6, Other Than Full and Open Competition. If market research reveals that only a very limited number of sources possess the unique combination of Design-Build expertise, mandatory Peruvian licensing (Registro Nacional de Proveedores - RNP), and demonstrated experience with specialized facilities (e.g., POL, medical, secure warehouses) in the local market, the Government may justify limiting competition. Option 2: Establishment of a Qualified Bidders List (QBL) under FAR Part 9.2. If the operational environment in Peru and the specialized nature of the requirement warrant it, the Government may decide to establish a formal Qualification Requirement. Under this authority, the Government would create a list of pre-qualified firms that demonstrate the essential standards for technical capability, financial stability, and in-country operational capacity. Future solicitations for this requirement would then be limited to firms on this established QBL. The Government�s final decision will be based on which strategy provides the best value and ensures a competitive environment among responsible and qualified contractors capable of meeting the demanding technical and logistical requirements of this project. 6. PROJECT DESCRIPTION: The contemplated scope consists of complete Design-Build services�including geotechnical verification, site preparation, civil works, architectural and engineering design after award, structural construction, mechanical/electrical/plumbing (MEP), specialized HVAC/fire suppression, Defense Base Act (DBA) insurance coverage, and Furniture, Fixtures, & Equipment (FF&E). Facility / Scope Package Primary Function Key Technical Considerations Building 110 Spare Parts Warehouse Heavy-duty slab design, industrial racking integration, material handling flow, automated logistics staging. Building 115 Clothing & Gear Warehouse High-density pallet storage, humidity and climate control, inventory distribution bays. Building 112 Material Warehouse Bulk staging, overhead crane/hoist accommodations, heavy equipment ingress/egress ramps. Building 113 Customs Warehouse Secure bonded holding areas, host-nation customs inspection layout, physical security infrastructure. Building 114 Petroleum, Oil, and Lubricants (POL) Warehouse Secondary containment, explosion-proof electrical systems, specialized foam/water fire suppression, environmental drainage controls. Building 111 Medicine & Medical Supplies Warehouse Temperature/humidity-controlled storage (cold chain capability), pharmaceutical-grade clean finishings, backup power integration. Building 120 DIRNOTEMAT & Quality Control Building Administrative offices, testing and quality inspection laboratories, specialized testing benches, IT/telecom infrastructure. Site & Ancillary Works Infrastructure & Integration Site grading, structural fill, perimeter security, access roads, utility connections, complete FF&E packages, and host-nation compliant permitting. 7. SOURCES SOUGHT: The purpose of this source sought is to gain knowledge of interest, capabilities and qualifications of contractors who have the capabilities to complete and perform contracts of this magnitude, and to address any questions, recommendations or concerns from Industry. The Government must ensure there is adequate competition among potential pool of responsible contractors. Prior Government contract work is not required for submitting a response under this Sources Sought announcement. The result of this market research will contribute to determining the method of procurement. 8. RESPONSES: The Capabilities Statement for this Sources Sought is not intended to be a Request for Proposal nor Invitation for Bid, nor does it restrict the Government to an ultimate acquisition approach. It is to request statements regarding the company's ability to demonstrate existing-or-developed expertise and experience in relation to the areas specified herein. Any commercial brochures or currently existing marketing material may also be submitted. This synopsis is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. Interested parties are requested to provide a capabilities statement addressing the following areas. Section 1: Company Information Company Name, Address, and Website Point of Contact (Name, Title, Phone, Email) CAGE Code and SAM UEI Number Business Size and Status (e.g., Small Business, Large Business) Bonding: What bonding or guarantee methods are available to your company to secure contract performance and protect downstream subcontractor/labor payments for a project located in Peru? Please specify if your company utilizes US Treasury-listed Surety Bonds, Peruvian Bank Letters of Guarantee (Carta Fianza), or Insurance-backed Guarantees (P�liza de Cauci�n). Relevant NAICS Codes Section 2: Interest and Experience in Peru Please confirm your company's interest in performing a design-build construction project of this magnitude and complexity in Lima, Peru. Summary of prior construction experience in Peru or South America. Address our minimum operational needs of experience with: Peruvian construction standards (Reglamento Nacional de Edificaciones), professional licensing requirements (Colegio de Ingenieros del Per� / Colegio de Arquitectos del Per�); Local labor laws, and tax/customs processes (SUNAT). Describe your firm's capability to obtain the necessary permits and licenses required for construction work in Peru and to comply with all applicable host nation laws and regulations. Discuss your firm's experience with international logistics, including the transportation of materials and equipment to project sites in South America. Discuss your firm�s familiarity with base security clearance procedures, host-nation military vetting, and port access protocols. Section 3: Design-Build and Technical Capabilities Provide a brief overview of your firm�s design-build experience as a prime contractor. Short Description of your firm's D-B delivery model (in-house engineering vs. joint-venture/partnership with qualified Peruvian or international A-E design firms). Provide examples of similar to the Project Description (warehouse, logistics, or similar industrial facilities your firm has designed and constructed). Overview of your logistical strategy for material staging, port-of-entry handling at Callao, procurement of heavy construction materials in Lima, and securing qualified local subcontractors and skilled labor. Section 4: Market Factors Please identify any significant market factors (e.g., availability of qualified local labor, supply chain issues, subcontractor market in Peru) that could impact the successful execution of a project of this nature. What significant concerns or risks do you foresee with designing and constructing a facility in Lima, Peru? 9. SUBMISSION INSTRUCTIONS: Format: Responses may be submitted in PDF or Microsoft Word format (suggested length: 3�6 pages). Brochures do not count towards this page count. Submission Deadline: Please submit your responses by 4:00 PM Atlantic Standard Time (AST) on 10 December 2026. No hard copies will be accepted. Submission Point of Contact: Please email responses directly to: Renee Booth, Contracting Officer: Meranda.R.Booth@usace.army.mil Jaclyn Yocum, Contract Specialist: Jaclyn.C.Yocum@usace.army.mil Subject Line for Replies: Market Research Response: Callao, Peru Infrastructure Modernization Project - [Insert Company Name] 10. QUESTIONS: Questions regarding this Sources Sought Announcement may be directed to Contract Specialist, Jaclyn Yocum, at Jaclyn.C.Yocum@usace.army.mil AND Contracting Officer, Renee Booth, at Meranda.R.Booth@usace.army.mil. ****SOURCES SOUGHT FOR MARKET RESEARCH PURPOSES ONLY**** ****B�SQUEDA DE FUENTES �NICAMENTE PARA FINES DE INVESTIGACI�N DE MERCADO**** Este anuncio solicita informaci�n de la industria que se utilizar� para fines de planificaci�n preliminar. No se solicitan ni aceptan propuestas mediante este anuncio. ESTA NO ES UNA SOLICITUD DE PROPUESTAS Y NO SE ADJUDICAR� NING�N CONTRATO COMO RESULTADO DE ESTA SINOPSIS. EN ESTE MOMENTO NO HAY DISPONIBLES SOLICITUD, ESPECIFICACIONES NI PLANOS. 1. AGENCIA: Cuerpo de Ingenieros del Ej�rcito de los Estados Unidos (USACE), Distrito de Latino Am�rica y el Caribe (SAA). 2. NAICS: 236220 � Construcci�n de Edificios Comerciales e Institucionales** 3. LUGAR DE EJECUCI�N: Per�. 4. INFORMACI�N DE ADQUISICI�N: El Cuerpo de Ingenieros del Ej�rcito de los Estados Unidos (USACE), Distrito de Latino Am�rica y el Caribe (SAA), emite este anuncio de B�squeda de Fuentes como medio para realizar una investigaci�n de mercado destinada a identificar entidades que tengan inter�s y recursos para apoyar un posible proyecto futuro de construcci�n bajo la modalidad de dise�o y construcci�n en la Base Naval del Callao, Lima, Per�. Los resultados de esta investigaci�n de mercado contribuir�n a determinar el m�todo de adquisici�n. Magnitud estimada de la construcci�n: Entre USD 25,000,000 y USD 50,000,000. Per�odo de ejecuci�n: 540 d�as despu�s de la Notificaci�n para Proceder. Fecha prevista de adjudicaci�n: tercer trimestre del a�o fiscal 2027. Programas para peque�as empresas: De conformidad con FAR 19.000(b)(1)(ii), el Oficial de Contrataciones Adquirente (PCO) ha decidido no aplicar la Parte 19 del FAR (Programas para Peque�as Empresas) a esta adquisici�n en el extranjero. Por consiguiente, no se utilizar�n reservas para peque�as empresas en este proyecto en Per�. Sin embargo, se alienta a todas las fuentes responsables �incluidas tanto las empresas estadounidenses, grandes y peque�as, como las entidades extranjeras� a presentar respuestas a este aviso de B�squeda de Fuentes. 5. ESTRATEGIA DE ADQUISICI�N PREVISTA: La estrategia de adquisici�n para este requisito se determinar� con base en las respuestas a este aviso de B�squeda de Fuentes y en otras investigaciones de mercado. El Gobierno est� considerando varias v�as de adquisici�n que cumplan con los requisitos aplicables para asegurar la ejecuci�n exitosa de este complejo proyecto de dise�o y construcci�n en Per�. Se recomienda a todas las empresas interesadas que presenten una declaraci�n integral de capacidades, ya que la informaci�n recibida ser� fundamental para determinar el m�todo final de adquisici�n. La estrategia principal prevista es una adquisici�n de dise�o y construcci�n en dos fases, conforme a la autoridad de la Parte 36.3 del FAR. En este escenario, el Gobierno emitir�a una solicitud p�blica de la Fase 1 para requerir las calificaciones de los oferentes. Con base en dichas calificaciones, el Gobierno preseleccionar�a a las empresas mejor calificadas �por lo general, no m�s de cinco� que posteriormente ser�an elegibles para competir en la Fase 2 y presentar propuestas t�cnicas detalladas y propuestas de precio. Sin embargo, debido a los desaf�os particulares asociados con la ejecuci�n de construcci�n compleja en Per�, el Gobierno tambi�n est� considerando las siguientes estrategias alternativas: Opci�n 1: Competencia limitada conforme a la Parte 6 del FAR, distinta de la competencia plena y abierta. Si la investigaci�n de mercado revela que solo un n�mero muy limitado de fuentes posee la combinaci�n �nica de experiencia en dise�o y construcci�n, licenciamiento peruano obligatorio (Registro Nacional de Proveedores, RNP) y experiencia demostrada con instalaciones especializadas �por ejemplo, almacenes de petr�leo, aceites y lubricantes (POL), suministros m�dicos o almacenamiento seguro� en el mercado local, el Gobierno podr�a justificar la limitaci�n de la competencia. Opci�n 2: Establecimiento de una Lista de Licitantes Calificados (QBL) conforme a la Parte 9.2 del FAR. Si el entorno operacional en Per� y la naturaleza especializada del requisito lo justifican, el Gobierno podr�a decidir establecer un Requisito Formal de Calificaci�n. Conforme a esta autoridad, el Gobierno crear�a una lista de empresas precalificadas que demuestren los est�ndares esenciales de capacidad t�cnica, estabilidad financiera y capacidad operativa dentro del pa�s. Las futuras solicitudes para este requisito se limitar�an entonces a las empresas incluidas en esta QBL establecida. La decisi�n final del Gobierno se basar� en la estrategia que ofrezca el mejor valor y garantice un entorno competitivo entre contratistas responsables y calificados, capaces de cumplir los exigentes requisitos t�cnicos y log�sticos de este proyecto. 6. DESCRIPCI�N DEL PROYECTO: El alcance previsto comprende servicios completos de dise�o y construcci�n, incluidos: verificaci�n geot�cnica; preparaci�n del sitio; - obras civiles; dise�o arquitect�nico y de ingenier�a posterior a la adjudicaci�n; construcci�n estructural; sistemas mec�nicos, el�ctricos y de plomer�a (MEP); sistemas especializados de calefacci�n, ventilaci�n y aire acondicionado (HVAC) y de supresi�n de incendios; cobertura de seguro conforme a la Defense Base Act (DBA); y mobiliario, accesorios y equipo (FF&E). Instalaci�n / Alcance del Proyecto Funci�n principal Consideraciones t�cnicas clave Edificio 110 Almac�n de repuestos Dise�o de losa para cargas pesadas, integraci�n de estanter�as industriales, flujo de manejo de materiales y �reas de preparaci�n log�stica automatizada. Edificio 115 Almac�n de vestimenta y equipo Almacenamiento de pallets de alta densidad, control de humedad y clima, y �reas de distribuci�n de inventario. Edificio 112 Almac�n de materiales �reas de acopio a granel, instalaciones para puente gr�a/polipasto y rampas para el ingreso y salida de equipo pesado. Edificio 113 Almac�n de aduanas �reas seguras de almacenamiento bajo control aduanero, distribuci�n para inspecciones aduaneras del pa�s anfitri�n e infraestructura de seguridad f�sica. Edificio 114 Almac�n de petr�leo, aceites y lubricantes (POL) Contenci�n secundaria, sistemas el�ctricos a prueba de explosiones, supresi�n especializada de incendios con espuma/agua y controles de drenaje ambiental. Edificio 111 Almac�n de medicamentos y suministros m�dicos Almacenamiento con control de temperatura y humedad �incluida la capacidad de cadena de fr�o�, acabados sanitarios de grado farmac�utico e integraci�n de energ�a de respaldo. Edificio 120 Edificio de DIRNOTEMAT y Control de Calidad Oficinas administrativas, laboratorios de pruebas e inspecci�n de calidad, bancos especializados de prueba e infraestructura de tecnolog�as de la informaci�n y telecomunicaciones. Obras del sitio y obras complementarias Infraestructura e integraci�n Nivelaci�n del sitio, relleno estructural, seguridad perimetral, v�as de acceso, conexiones de servicios p�blicos, paquetes completos de mobiliario, accesorios y equipo (FF&E), y permisos que cumplan con los requisitos del pa�s anfitri�n. 7. B�SQUEDA DE FUENTES: El prop�sito de esta b�squeda de fuentes es obtener informaci�n sobre el inter�s, las capacidades y las calificaciones de contratistas con capacidad para completar y ejecutar contratos de esta magnitud, as� como atender preguntas, recomendaciones o inquietudes de la industria. El Gobierno debe asegurar que exista competencia adecuada entre el posible grupo de contratistas responsables. No se requiere experiencia previa en contratos gubernamentales para presentar una respuesta a este anuncio de B�squeda de Fuentes. Los resultados de esta investigaci�n de mercado contribuir�n a determinar el m�todo de adquisici�n. 8. RESPUESTAS: La Declaraci�n de Capacidades para esta B�squeda de Fuentes no constituye una Solicitud de Propuestas ni una Invitaci�n a Licitar, ni restringe al Gobierno respecto a un enfoque final de adquisici�n. Su finalidad es solicitar declaraciones sobre la capacidad de la empresa para demostrar conocimientos especializados y experiencia existentes o desarrollados en relaci�n con las �reas aqu� especificadas. Tambi�n pueden presentarse folletos comerciales o materiales de mercadeo existentes. Esta sinopsis tiene �nicamente fines de informaci�n y planificaci�n; no debe interpretarse como un compromiso del Gobierno, ni el Gobierno pagar� por la informaci�n solicitada. No se notificar� a los participantes sobre los resultados de la evaluaci�n. Se solicita a las partes interesadas que proporcionen una declaraci�n de capacidades que aborde las siguientes �reas: Secci�n 1: Informaci�n de la empresa Nombre de la empresa, direcci�n y sitio web. Punto de contacto (nombre, cargo, tel�fono y correo electr�nico). C�digo CAGE y n�mero UEI de SAM. Tama�o y condici�n de la empresa (por ejemplo, peque�a empresa o gran empresa). Garant�as: �Qu� m�todos de fianza o garant�a tiene disponibles su empresa para asegurar el cumplimiento contractual y proteger los pagos a subcontratistas y trabajadores de niveles inferiores en un proyecto ubicado en Per�? Especifique si su empresa utiliza fianzas de garant�a respaldadas por compa��as incluidas en la lista del Tesoro de los Estados Unidos, cartas fianza bancarias peruanas o p�lizas de cauci�n. C�digos NAICS pertinentes. Secci�n 2: Inter�s y experiencia en Per� Confirme el inter�s de su empresa en ejecutar un proyecto de construcci�n bajo la modalidad de dise�o y construcci�n de esta magnitud y complejidad en Lima, Per�. Resumen de experiencia previa en construcci�n en Per� o Am�rica del Sur. Aborde los siguientes requisitos operacionales m�nimos de experiencia: Normas de construcci�n peruanas (Reglamento Nacional de Edificaciones) y requisitos de licenciamiento profesional (Colegio de Ingenieros del Per� / Colegio de Arquitectos del Per�). Leyes laborales locales y procesos tributarios y aduaneros (SUNAT). Describa la capacidad de su empresa para obtener los permisos y licencias necesarios para realizar trabajos de construcci�n en Per� y para cumplir todas las leyes y reglamentos aplicables del pa�s anfitri�n. Describa la experiencia de su empresa en log�stica internacional, incluido el transporte de materiales y equipos a sitios de proyecto en Am�rica del Sur. Describa la familiaridad de su empresa con los procedimientos de autorizaciones de seguridad para acceso a bases, los procesos de evaluaci�n militar del pa�s anfitri�n y los protocolos de acceso portuario. Secci�n 3: Capacidades t�cnicas y de dise�o y construcci�n Proporcione una breve descripci�n general de la experiencia de su empresa en dise�o y construcci�n como contratista principal. Breve descripci�n del modelo de ejecuci�n de dise�o y construcci�n de su empresa, por ejemplo, ingenier�a interna frente a una empresa conjunta o asociaci�n con firmas peruanas o internacionales calificadas de arquitectura e ingenier�a (A-E). Proporcione ejemplos similares a la Descripci�n del Proyecto, tales como almacenes, instalaciones log�sticas u otras instalaciones industriales similares que su empresa haya dise�ado y construido. Proporcione una descripci�n general de su estrategia log�stica para el acopio de materiales, la gesti�n en el puerto de entrada del Callao, la adquisici�n de materiales pesados de construcci�n en Lima y la contrataci�n de subcontratistas locales y mano de obra calificada. Secci�n 4: Factores de mercado Identifique los factores de mercado significativos �por ejemplo, disponibilidad de mano de obra local calificada, problemas en la cadena de suministro o el mercado de subcontratistas en Per�� que podr�an afectar la ejecuci�n exitosa de un proyecto de esta naturaleza. �Qu� preocupaciones o riesgos significativos prev� respecto al dise�o y la construcci�n de una instalaci�n en Lima, Per�? 9. INSTRUCCIONES DE PRESENTACI�N Formato: Las respuestas podr�n presentarse en formato PDF o Microsoft Word (extensi�n sugerida: de 3 a 6 p�ginas). Los folletos no cuentan para este l�mite de p�ginas. Fecha l�mite de presentaci�n: Presente sus respuestas a m�s tardar a las 4:00 p. m., hora est�ndar del Atl�ntico (AST), el 10 de diciembre de 2026. No se aceptar�n copias impresas. Puntos de contacto para la presentaci�n: Env�e las respuestas directamente por correo electr�nico a: Renee Booth, Oficial de Contrataciones: Meranda.R.Booth@usace.army.mil Jaclyn Yocum, Especialista en Contrataciones: Jaclyn.C.Yocum@usace.army.mil L�nea de asunto para las respuestas: Respuesta a Investigaci�n de Mercado: Proyecto de Modernizaci�n de Infraestructura en Callao, Per� - [Insertar nombre de la empresa] 10. PREGUNTAS: Las preguntas relacionadas con este Anuncio de B�squeda de Fuentes pueden dirigirse a la Especialista en Contrataciones, Jaclyn Yocum (Jaclyn.C.Yocum@usace.army.mil ) y a la Oficial de Contrataciones, Renee Booth (Meranda.R.Booth@usace.army.mil), a las direcciones de correo electr�nico indicadas en el anuncio original. ****B�SQUEDA DE FUENTES �NICAMENTE PARA FINES DE INVESTIGACI�N DE MERCADO****

Stated in the notice: Estimated Magnitude of Construction: Between $25,000,000 and $50,000,000.

Amendment 0001 is issued to attach the Pre-Proposal Site Visit Sign-In sheet.

Please see attached for Amendment 0001 to the Solicitation.

This announcement constitutes a Source Sought Notice. This announcement seeks information from industry and will only be used for preliminary planning purposes. THIS IS NOT A SOLICITATION FOR BIDS AND NO CONTRACT SHALL BE AWARDED FROM THIS NOTICE. Respondents will not be notified of the results of the evaluation. The Jacksonville District of the U.S. Army Corps of Engineers is seeking interest from prospective offerors for a potential fiscal year (FY) 2027 award of the aforementioned project. The purpose of this Sources Sought Notice is to gauge of interest, capabilities and qualifications of various members of the Construction and Dredging Communities, to include Small Businesses, as the Government must ensure there is adequate competition amongst the potential pool of responsible contractors. The notice is also soliciting comments from the construction community addressing the potential use of Project Labor Agreements (PLA) for this large-scale construction project exceeding $35,000,000. No reimbursement will be made for any costs associated with providing information in response to said notice or any follow-up information requested. The proposed project will be a Firm Fixed Price (FFP) contract. The Jacksonville District anticipates the issuance of an Invitation For Bid (IFB). No reimbursement will be made for any costs associated with providing information in response to said sources sought notice or any follow-up information requested. DESCRIPTION OF WORK: The proposed project work will consist of nourishing approximately 4.1 miles shoreline along Kennedy Space Center between FDEP Range Monuments V-366 and V-386 in Brevard County, Florida. The project includes dredging approximately 2.5 million cubic yards (MCY) of material for construction of a beach berm and dune. Beach compatible sand for the project may be dredged from up to three (3) offshore borrow areas. Chester Shoals I is located east of Cape Canaveral in State waters and is centered approximately 1.7 miles offshore of Kennedy Space Center. Kennedy Shoals and Hetzel Shoals are located east of Cape Canaveral in Federal waters and are centered approximately 4.5 miles and 10 miles, respectively, offshore of Kennedy Space Center. Project work also includes, but is not limited to, beach tilling, turbidity monitoring, environmental species monitoring, and Munitions and Explosive of Concern (MEC) support. The project will have an estimated period of performance of 280 calendar days after issuance of Notice to Proceed (NTP), including 60 calendar days to commence work. Magnitude of construction is between $25,000,000 and $100,000,000. The NAICS Code is 237990 Other Heavy and Civil Engineering Construction and the SMALL BUSINESS STANDARD SIZE IS $45,000,000.00. Anticipated solicitation issuance date is on or about June 1, 2027 and the anticipated bid opening day is on or about July 1, 2027. The official Synopsis citing the solicitation number will be issued on the SAM.gov Contracting Opportunities Website: www.sam.gov. An Invitation for Bid will be issued in electronic format only and will be posted on the System for Award Management (SAM) website at https://www.sam.gov/. In order to receive notification of any issued amendments, interested parties must register as an interested vendor on the SAM website at https://www.sam.gov/. Please be advised, if you are not registered, the Government is not responsible for providing you with notification to any changes to this solicitation. You must be registered in the System for Award Management (SAM) in order to be eligible to receive an award from this solicitation. For additional information, please call 866-606-8220 or visit the SAM website at https://www.sam.gov/. Responses to this Sources Sought Notice shall be limited to 5 pages and shall include the following information: 1. Company/Contractor name, address, point of contact, phone number and e-mail address. 2. Company�s interest in bidding on the subject requirement when issued. 3. Company�s capability to perform a contract of this magnitude and complexity (include company�s capability to execute comparable work performed within the past 10 years). Company should provide at least 3 examples which, at a minimum, include the following: a. Brief description of the project b. Customer name c. Customer satisfaction d. Timeliness of performance e. Dollar value of the completed projects 4. Offeror shall identify their Small Business classification and Small Business Size _ Small Business _ Small Disadvantage Business _ 8(a) Small Business _ HUB Zone _ SDVOSB _ WOSB 5. If significant subcontracting or teaming is anticipated in order to deliver technical capability, firms should address the structure of such arrangement include Joint Venture information, if applicable � existing and potential. 6. Bonding Capacity (construction bonding level per contract and aggregate construction bonding level, both expressed in dollars) via letter from the bonding company. 7. Do you have knowledge that Project Labor Agreement (PLA) has been used in the local area on projects of this kind? If so, please provide supporting documentation? 8. Are you aware of skilled labor shortages in the area for those crafts that will be needed to complete the reference project? If so, please elaborate and provide supporting documentation where possible. 9. Are you aware of time sensitive issues/scheduling requirements that would affect the rate at which the referenced project should be completed? If so, please elaborate and provide supporting documentation where possible. 10. Identify specific reasons why or how you believe a PLA would advance the Federal Government�s interest in achieving economy and efficiency in Federal procurement. 11. Identify specific reasons why you do not believe a PLA would advance the Federal Government�s interest in achieving economy and efficiency in Federal procurement. 12. Identify any additional information you believe should be considered on the use of a PLA on the referenced project. 13. Identify any additional information you believe should be considered on the non-use of a PLA on the referenced project. 14. Does your company intend to bid/propose on this project if a PLA requirement is included in the solicitation? Does your company intend to bid/propose on this project if a PLA requirement is not included in the solicitation? 15. What are the likely cost impacts, if any, to your bid/proposal price if a PLA requiremen is included in the solicitation? Please provide as much detail as possible regarding any anticipated cost impacts (positive or negative) of the inclusion of a PLA requirement, including any information you can provide about the magnitude of the anticipated impact. NOTES: DO NOT SUBMIT A RESPONSE TO THIS NOTICE IF YOU DO NOT INTEND TO BID ON THIS PROJECT. DO NOT SUBMIT PROPRIETARY AND/OR BUSINESS CONFIDENITAL DATA. Submission Instructions: Interested parties who consider themselves qualified to perform the work associated with the subject requirement, are invited to submit a response to this Sources Sought Notice no later than December 22, 2026 at 5:00PM, local time. All responses under this Sources Sought Notice shall be sent to Mrs. Ruth Rodriquez via email at ruth.c.rodriguez@usace.army.mil and Mr. Guesley Leger at guesley.leger@usace.army.mil. Prior Government contract work is not required for submitting a response under this sources sought notice. You must be registered in the System for Award Management (SAM), in order to be eligible to receive an award from any Government solicitation. To register, go to www.sam.gov. For additional information visit the website for the Federal Service Desk (www.FSD.gov) which supports SAM or contact them at 866-606-8220 for assistance.

Stated in the notice: Magnitude of construction is between $25,000,000 and $100,000,000.

Presolicitation Notice Presolicitation Notice Page 3 of 3 Pre-Solicitation Notice Pre-Solicitation Notice Page 1 of 3 DESCRIPTION Solicitation No: 36C25227B0008 Project: Emergent Repairs North Water Tower 71 & South Water Tower 94 CON Project Number: 550-26-121 Location: Veterans Affairs Illiana Healthcare System (VAIHCS), Illinois This Pre-Solicitation Notice is NOT a request for submittals of any kind. The information provided is for planning purposes only and does not constitute a request for bid. This construction project will be set-aside for Service-Disabled-Veteran-Owned-Small-Businesses (SDVOSB). Contractor must provide all tools, materials, components, labor, and supervision for repair and painting of project 550-26-121 Emergent Repairs North Water Tower 71 & South Water Tower 94 CON. Provide other trades as required to accommodate this work. All services related to the Statement of Work (SOW) shall comply with all applicable federal, state, and local codes and regulations, and VA Codes, Standards and Executive Orders including but not limited to Veterans Affairs Illiana Healthcare System (VAIHCS) Construction Safety Policy, VA Infection Control Policy, Veterans Affairs Illiana Healthcare System (VAIHCS) site-specific requirements and Standard Operation Procedures and all work will be provided with one-year parts and labor warranty from date of acceptance by the VA. Work is to be completed within 135 calendar days of receipt of a Notice to Proceed. In accordance with Public Law 109-461, and pursuant to 38 USC 8127(d), competition is restricted to SDVOSB firms. The solicitation, which will be posted on https://sam.gov will include all drawings, plans and specifications related to this requirement and be issued on/about November 23, 2026 with bids due on/about January 6, 2026. The bidder is responsible to monitor and download any amendments from https://sam.gov which may be issued for this solicitation. There will be a pre-bid site visit held for this project, and all prospective bidders are encouraged to attend. Details of the pre-bid site visit will be included in the solicitation package. In accordance with VAAR 819.7003 (b), at the time of submission of bids, and prior to award of any contracts, the bidder must represent to the CO that it is a (1) SDVOSB eligible under VAAR Subpart 819.70; (2) Small business concern under the NAICS code assigned to this acquisition; and (3) SDVOSB listed as verified in SBA database at: https://search.certifications.sba.gov/ The project magnitude range is between $1,000,000 and $2,000,000. The North American Industry Classification System (NAICS) for this procurement is 237110 (Water and Sewer Line and Related Structures Construction); size standard $45.0 million applies. In order to receive a contract, you shall be registered and current in SAM.gov. If you are not registered with System for Award Management (SAM) you may register online at https://sam.gov.

SPECIAL NOTICE Fort Campbell Operation and Maintenance, Army (OMA) Construction and Related Facility Support Requirements Contractor Repository � Fort Campbell, KY (Federal Acquisition Regulation (FAR) 12.201-1(d) (DEVIATION 2026-O0028)) PURPOSE The Mission and Installation Contracting Command (MICC), Fort Campbell, KY, is issuing this Special Notice to identify small business concerns interested in receiving future request for quotations for various construction and related facility-support requirements at Fort Campbell, KY. In accordance with Federal Acquisition Regulation (FAR) 12.201-1(d) (DEVIATION 2026-O0028), the Government intends to establish and maintain a repository of interested and qualified small businesses concerns. The repository will be used to efficiently distribute future requirement-specific requests for quotations to firms that respond to this notice and represent that they can perform the applicable work. The Government�s objectives are to: I. Reduce administrative costs and procurement lead time; II. Improve opportunities for small business concerns; III. Promote efficiency and economy in contracting; and IV. Avoid unnecessary burdens for the Government and contractors. This Special Notice is not a solicitation, request for quotations or commitment by the Government to issue a purchase order (PO). The Government will not reimburse respondents for any costs associated with preparation or submission of a response to this notice. 1. Anticipated Requirements The Government anticipates requirements primarily associated with NAICS Code 236220, Commercial and Institutional Building Construction, including repair, alteration, maintenance, minor construction, and related facility-support work. Although NAICS Code 236220 (Size Standard: $45.0 Million. Product Service Code (PSC): Z2JZ - Repair or alteration of miscellaneous buildings.) is identified as the primary anticipated NAICS code for this notice. Individual future requirements may require a different NAICS code, product service code (PSC), size standard, scope, licensing requirement, bonding threshold, or other requirement appropriate to the specific work. Anticipated work may include, but is not limited to: General construction, repair, and alteration of facilities; Carpentry, masonry, welding, roofing, painting, electrical, plumbing, and heating, ventilation, and air conditioning (HVAC) work; Civil, site, drainage, earthwork, and related utility work; Demolition and removal services; Hoist and crane inspection, maintenance, repair, and related services; Environmental, energy-conservation, logistical, and other facility-support requirements; and Other construction or service requirements supporting Fort Campbell facilities and infrastructure. 2. Geographic Area Performance will occur at Fort Campbell, KY, (Zip Code: 42223) and may include associated facilities located within: Tennessee: Montgomery and Stewart County Kentucky: Christian and Trigg County 3. Acquisition, Eligibility, and Registration Requirements The Government anticipates executing future requirements through individual purchase orders (POs) on an as-needed basis. Individual POs are anticipated to range from $2,000 to $9,000,000. Each individual PO or associated request for quotation will specify the applicable statement of work, performance location, completion date or period of performance, submission instructions, evaluation criteria, and other terms and conditions. To be considered for future opportunities, interested contractors must meet and maintain the following requirements, as applicable to each individual requirement: Small Business Participation: This initiative is focused on expanding opportunities for small business concerns. The Government encourages participation from all small business socioeconomic categories, including Small Business (SB), Small Disadvantaged Business (SDB), 8(a) Business Development Program participants, Historically Underutilized Business Zone (HUBZone) small businesses, Service-Disabled Veteran-Owned Small Businesses (SDVOSB), and Women-Owned Small Businesses (WOSB). SAM Registration: Contractors must maintain an active registration in the System for Award Management (SAM) and possess a valid Unique Entity Identifier (UEI) to be eligible for award. Installation Access: Contractors must be able to obtain and maintain the personnel credentials, vehicle access, insurance, and other installation-access requirements necessary to perform work at Fort Campbell. Requirement-specific access instructions will be provided for each individual PO, as applicable. Insurance and Bonding: Contractors must be able to provide current and valid proof of general liability insurance and meet applicable bonding requirements at the time of award. Any required bid guarantees, performance bonds, payment bonds, or other insurance and bonding documentation will be identified in the individual request for quotation or PO. Inclusion in the contractor repository does not constitute prequalification, guarantee receipt of a future request for quotation, or guarantee award of a PO. 4. Repository Process and Future Requirement Notices This Special Notice will remain open for 12 months from the date of posting, unless cancelled earlier by the Government. The Government may renew or repost the notice annually, as needed. Firms responding to this notice may be included in the Government�s repository of interested contractors. Inclusion in the repository: Does not constitute prequalification; Does not establish a contract, blanket purchase agreement, ordering agreement, or other contractual instrument; Does not guarantee that a firm will receive a future requirement notice, be invited to quote, or receive an award; and Does not relieve a firm from meeting the terms, conditions, and evaluation criteria established for each individual requirement. When a requirement is identified that falls within the scope of this notice, the Government intends to distribute a requirement-specific notice by email to repository firms identified as potentially capable of performing that work. Each requirement-specific notice may include: A scoping statement or description of the requirement; Applicable NAICS code, PSC, and size standard; Site-visit date, time, location, and access instructions, if applicable; Submission instructions and proposal due date; Required statement of work (SOW), technical approach, pricing, or other quote content; Evaluation criteria and basis for award; and Any applicable bonding, licensing, insurance, safety, security, or other performance requirements. Site visits may be conducted for individual requirements. Attendance is not mandatory; however, attendance is strongly encouraged. The Government will evaluate quotations and make any award in accordance with the procedures, terms, and evaluation criteria stated in the individual requirement-specific notice. 5. Response Instructions Interested small business concerns should submit a capability statement by email to MICCIDEA@army.mil with the subject line: Response to Fort Campbell RFO 12.201-1(d) Contractor Repository � [Company Name] In addition to the email, please complete the repository form. The link (IDEAS Construction Repository Form) and a QR code have been provided. Responses should only include the following: I. Company Information Legal business name; Physical and mailing address; Unique Entity Identifier (UEI); Commercial and Government Entity (CAGE) code; II. Point of Contact (POC) Information Primary point of contact, title, telephone number(s), and email address. (This email and information provided on the form, will be used to send future project opportunities) Point of contact, title, telephone number(s), and email address of individual who can oblige the company. III. Socioeconomic Status Applicable socioeconomic designations, if any, such as small business, 8(a), HUBZone, service-disabled veteran-owned small business (SDVOSB), women-owned small business (WOSB), or small disadvantaged business (SDB). NOTE: This opportunity is only open to Small Businesses. IV. Bonding and Licensing Single-project and aggregate bonding capacity, if applicable; Relevant state or local licenses, certifications, and trade credentials; Any relevant safety, quality-control, or inspection certifications. V. SAM Registration Confirmation that the firm is registered in the System for Award Management (SAM) and that its registration is active, or the firm�s plan and anticipated date to obtain active registration before award. 6. General Contractor Intake Form MICC Fort Campbell maintains a General Contractor Intake Form for any business interested in doing business with Fort Campbell. The General Contractor Intake Form, available through the link (General Contractor Intake Form) below under �Links,� is separate from the MICCFTCINNOVATION contractor repository established under this Special Notice and does not limit participation to any particular North American Industry Classification System (NAICS) code, product service code (PSC), industry, or type of requirement. Businesses may complete the General Contractor Intake Form to provide company and capability information for inclusion in a centralized contractor repository. The Government uses information submitted through this form to identify potential sources suited for specific requirements, support rapid acquisition strategies, and expedite market research for short-fuse or emergent operational needs. The Government may also use this repository to directly solicit and compete requirements among qualified, registered contractors. Contractor capability statements and data play a vital role in our process, as they help the Government determine the appropriate market research, notification, competition, and solicitation procedures for each individual requirement. However, submission of the General Contractor Intake Form, or inclusion in the general contractor repository, does not constitute prequalification; establish a contract, blanket purchase agreement, ordering agreement, or other contractual instrument; or guarantee that a firm will receive notice of a future requirement, be invited to quote, or receive an award. 7. Notice Disclaimer The Government may update this notice or issue clarifications as necessary. Firms are responsible for monitoring SAM.gov for amendments, updates, or replacement notices. This Special Notice is issued for market research and planning purposes. It does not constitute a solicitation or an obligation on the part of the Government. The Government may modify, suspend, cancel, or discontinue this notice and the associated repository process at any time. Note: Please do not submit redundant inquiries. All updates and future steps regarding the repository will be communicated directly to the email addresses gathered through this notice.

Market Research Only � Not a Request for Proposal Title: Counter-Unmanned Aircraft System (C-UAS) Netting Installation for Aircraft Sunshade Structures Notice Type: Sources Sought NAICS Code: 238990 � All Other Specialty Trade Contractors Response Due Date: 13 November 2026, 4:00 PM Local Time Submit Responses To: matthew.lahr.3@us.af.mil 1. Purpose The United States Air Force is conducting market research to identify qualified sources capable of providing all design, materials, labor, and equipment necessary to furnish and install counter-Unmanned Aircraft System (UAS) netting on existing aircraft sunshade structures. A primary purpose of this notice is to determine whether this requirement can be set aside for small businesses under the SBA guidelines for NAICS 238990. The Government is seeking to determine the availability and capability of small business concerns (including 8(a), HUBZone, SDVOSB, and WOSB) to perform this work. This notice is issued solely for market research and small business set-aside determination purposes in accordance with FAR Part 10. It does not constitute a Request for Proposal (RFP), Invitation for Bid, or any other form of solicitation. The Government does not guarantee that a contract will result from this notice, and the Government will not reimburse any costs incurred by interested parties in preparing or submitting a response. The Government is also interested in unique and innovative solutions, including any proof-of-concept or operational C-UAS netting installations already fielded or under evaluation at other Department of Defense installations. 2. Requirement Overview The contractor shall design, furnish, and install counter-UAV netting on all four sides of six (6) existing aircraft sunshade structures. Each structure is approximately: Length: 630 feet Width: 65 feet Height: 30 feet Configuration: 6 bays per structure A drawing of the aircraft sunshade structures is attached to this notice. Primary Objective: Prevent Group 1 (�small�) Unmanned Aerial Vehicles from penetrating the interior of the sunshade structures to protect aircraft and personnel. 3. Technical Requirements (Minimum) The proposed netting system must meet or exceed the following: Material: UV-resistant, moisture-resistant, capable of withstanding temperatures up to 400�F. Polyester or Nylon are preferred. Tensile strength: 200 lbs or greater. Mesh opening: Netting squares no larger than 3 inches across. Performance: Capable of stopping Group 1 small UAVs from penetrating the structure without compromising the netting. Wind Load: Must meet Miami-Dade County Wind Load rating requirements. Retractability: Netting installed on the north- and south-facing sides shall be quickly and easily retractable to allow normal aircraft entry and exit. Engineering Support: The contractor shall utilize licensed professional engineers (as applicable). Structural engineers may be required to evaluate the load capacity of the existing metal sunshade structures and design appropriate attachment methods. The contractor is responsible for all design, material procurement, fabrication, installation, testing, and any structural modifications required for a complete and functional system. 4. Capabilities Package Requirements All interested parties (large and small businesses) are encouraged to submit a capabilities package limited to 10 pages total. The package must include, at a minimum: a. Company name, CAGE code, UEI number, business size status (including small business size standard under NAICS 238990), and socioeconomic category (if applicable). b. Relevant past performance on similar projects (large-scale netting, screening, protective systems, or specialized fabric installations on metal structures, preferably aviation-related). c. Technical approach or conceptual design solution addressing the material, performance, wind-load, retractability, and engineering requirements. d. Experience with structural engineering analysis and load calculations on existing metal structures. e. Description of any innovative or unique C-UAS netting solutions your company has developed or installed. f. Rough Order of Magnitude (ROM) pricing and estimated period of performance (optional but highly desired). g. Any other information demonstrating your company�s ability to successfully perform this requirement. Small businesses are especially encouraged to respond and clearly identify their business size status. 5. Submission Instructions Email your capabilities package to: matthew.lahr.3@us.af.mil Subject Line: �C-UAS Sunshade Netting Sources Sought � [Company Name]� Deadline: No later than 13 November 2026, 4:00 PM Local Time 6. Disclaimer This Sources Sought notice is for information and planning purposes only. Responses will be used to assess industry interest and capability, and specifically to determine whether a small business set-aside is feasible. The Government is under no obligation to issue a solicitation or award a contract as a result of this notice. The Government will not pay for any information submitted in response to this notice.

This is notice of an upcomming contracting opportunity and site visit. A site visit has been scheduled for 11/19/2026 at 0930. Interested parties MUST follow instructions below in order to gain access to DSCR; it is a secure facility and access is permitted ONLY to those who have been vetted and approved. NOTE: This contracting opportunity is for overhead door repair service at Defense Supply Center Richmond. The resultant contract will be an Indefinite Delivery Purchase Order(IDPO). This notice is being published at this time in order to allow adequate time for vetting of persons interested in attending the upcomming site visit. In order to attend the site visit interested parties MUST follow the instructions below no less than 5 business days prior to the site visit. This is to allow time for vetting by base security. Plan on arriving at DSCR an hour prior to the site visit time, as the processing time through the visitor center fluctuates. Follow the link below to register through DBIDS, and a QR code should be provided for each visitor. The QR codes MUST be emailed to the Project Manager, Mike O'Connor (Work Cell: 804-306-5273). The QR code MUST be emailed to the project manager as soon as possible due to the lengthy vetting process of approximately 5 business days. The project manager will also serve as the sponsor for site visit attendees. A new system was implemented on 3 January 2023 to screen visitors and contractors for installation access at DSCR.The new system is designed to increase efficiencies, enhance the protection of personal information during the vetting process and eliminate the use of hard copy DLA Form 1815s. The new screening system will require visitors and contractors to pre-enroll in DBIDS (Defense Biometric Identification System). To begin the process, visitors and contractors will complete registration through the pre-enrollment website: https://dbids-global-enroll.dmdc.mil. Upon entry of their information, visiting personnel will be provided an electronic form to download, which will have an individualized barcode and alpha numeric code. The codes need to be sent to the visiting person�s sponsor(Mike O'Connor). Once in receipt of the barcode, the sponsor will email Security and Emergency Services and provide the barcode and sponsorship information. Once the visitor/contractor is vetted and approved for installation access, Security & Emergency Services will notify the sponsor that the visitor/contractor can go to the DSCR Visitor Center to obtain his/her pass. At the Visitor Center, the visitor provides the barcode and code provided earlier in the process and completes the credentialing process. See attached SOW for full requirement details. Parties interested in this project are advised and expected to have reviewed the entire SOW prior to site visit attendance. This notice of an upcomming contracting opportunity which will be awarded as an indefinite delivery purchase order(IDPO) for overhead door repair service at Defense Supply Center Richmond. The full solicitation will be published on, or around, 11/09/2026 and will remain open for a period not less than 30 days. A site visit will be held on 11/19/2026 at 0930. See map on p.49 of the attached Statement of Work(SOW) for the meeting location for the site visit.

This project is for the construction of EHRM Infrastructure Upgrades at the Louis A Johnson VA Medical Center in Clarksburg, WV.

Timucuan Ecological and Historic Preserve TIMU-335507 Stabilize Kingsley Plantation Shoreline with Seawall Extension

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 12441926Q0040 is issued as a Request for Quotation (RFQ) for Waterline Replacements. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 237110 The small business size standard is $45 million. This acquisition is a Total Small Business Set-aside. All responsible sources may submit a quotation which will be considered by the agency. This project is located at the Oconaluftee Job Corps Civilian Conservation Center located four miles from Cherokee, North Carolina in Swain County. The address is 502 Oconaluftee Job Corps Rd, Cherokee, NC 28719. For additional information, Offerer's should review the solicitation and attachments in their entirety. There will be one (1) site visit on 16 October 2026 at 1000 EST. The location is 502 Oconaluftee Job Corps Rd, Cherokee, NC 28719. The POC is Rebecca Ensley . In order to facilitate conference preparations, contractors must RSVP with the number of attendees no later than 72 hours prior to the start of the site visit. RSVPs must be sent to Rebecca Ensley at Rebecca.Ensley@usda.gov .

***ADDRESS HAS BEEN UPDATED in the LOCATION/LOGISTICS SECTION*** The U.S. Army Corps of Engineers (USACE) Louisville District is issuing this special notice to announce an Industry Day for upcoming construction requirement for Construction of a 300-member Army Reserve Center (ARC) at Defense Supply Center, Richmond, VA. The Louisville District is considering Construction Manager at Risk (CMAR) under 10 USC �2808a Other Transaction Authority for this requirement. This notice is for informational and planning purposes to allow interested parties to prepare for and provide feedback prior to the official Request for Qualifications (RFQ) release. INDUSTRY DAYS USACE intends to conduct an Industry Day on 19 November 2026 at 0900 Eastern Time to provide an overview of the project, potential acquisition strategy, and anticipated requirements. This event will provide interested parties with an opportunity to gain additional insight into the project and potential Construction Manager at Risk (CMAR) approach under an Other Transaction (OT) framework, ask questions, and provide input in advance of the official RFQ release. General questions from industry participants will be permitted during the Industry Day; however, all discussions and responses provided during the event are considered unofficial and for informational purposes only. Statements made during the Industry Day do not constitute commitment, authorization, or binding guidance related to the future RFQ. Official Questions and Answers (Q&A) will be accepted and addressed following the release of the RFQ. Contractors and subcontractors interested in participating are requested to submit their Name, Company Name and contact information (email and phone) to the USACE Contracting Specialist no later than 1600 on 17 November 2026. Please use the information below to request Installation/Base access: Step 1: Badge Requests: To obtain pass/badge for one day or more, the contractor shall complete DBIDS pre-registration online using the following link DBIDS Pre-Enrollment or at https://dbids-global-enroll.dmdc.mil/preenrollui/#/landing-page. Once pre-registration has been complete, the visitor/contractor shall record and send the QR code/alpha-numeric code as a PDF/screenshot to the COR/PM via email (if multiple people are visiting or being vetted, the contractor shall compile all QR/alpha-numeric codes into a single email) at least 5 business days prior to visit/start date. The contractor shall include requested dates, times and names of personnel in the email. Failure to provide all the above information may lead to delays in requests being processed which could result in missed site visits, meetings etc. The COR/PM will notify the contractor upon their approval or denial. If approved, the contractor will have 30 days to pick up their visitor pass or project badge. When picking up the project badge the contractor is required to present their QR or alphanumeric code along with a valid form of ID. When filling out the QR code form, for the Service Site - select All. State � Virginia. Filter � Defense Logistics Agency Richmond. Note, a valid DOD ID card (Retired military, CAC etc.) is NOT permitted to be used to enter DCSR for commercial purposes. Step 2: Send a copy of their QR codes to Steven.Hall@DLA.MIL and he can forward them to security for vetting. Usually security will get back within a day or two of the submittal and let me know if they�ve been approved or not and then they are able to come and pick up a badge at the pass office. LOCATION/LOGISTICS Industry Day Presentation Location: 6090 Strathmore Road (Bldg 70), North Chesterfield, VA 23237 (Red, brick building with a large chimney right past the visitors center when you enter the gate) NOTE: Onsite parking space may be limited, overflow parking is available in the vicinity. PROJECT OVERVIEW Project Title: Construction of Army Reserve Center (ARC) Location: Richmond, Virginia Agency: U.S. Army Corps of Engineers, Louisville District NAICS Code: 236220 PROJECT DESCRIPTION Primary facilities include a 56,500 SF Army Reserve Center and 1200 SF Unheated Storage Building. Facilities will be designed in accordance with the Army Reserve Design Guide. Supporting facilities include land clearing, general site improvements, lighting, walks, signage, curbs and gutters, storm drainage, paving, information systems, and utility connections. Sustainability/Energy and cybersecurity measures are included. All fixtures, furnishings, and equipment will be provided. Antiterrorism force protection and physical security measures will be incorporated into the design including minimum standoff distances from roads, parking areas and vehicle unloading areas. Access for individuals with disabilities will be provided. Facilities will be designed to a minimum life of 40 years in accordance with DoD's Unified Facilities Criteria 1-200-02 including energy efficiencies, building envelope and integrated building systems performance. The project contains options such as: Bona fide need collateral equipment. The Contract Duration is estimated at 790 calendar days from Notice to Proceed on Construction Award. ACQUISITION STRATEGY � PRE-AWARD USACE, Louisville District plans to use a streamlined competitive selection process: Step 1 � White Papers/Qualification Statements: Interested parties will submit a Statement of Qualifications (max # of pages to be defined in formal RFQ. Following evaluation of the qualification packages, the Government intends to down-select a target of three (3) highest qualified firms to proceed to Step 2. Step 2 � Pitch Presentations: Down-selected firms will participate in live pitch meetings. One company will be selected as the Construction Manager for negotiation and award of Agreement 1 for preconstruction services. The Government intends to negotiate a Guaranteed Maximum Price (GMP) for construction of the ARC, which will be added as a bilateral modification at a later date. ACQUISITION STRATEGY � AWARD The agreement would be awarded to the most qualified Construction Manager at Risk (CMAR) to provide preconstruction services and construction. Phase 1 of the CMAR agreement would include pre-construction services. The selected CMAR would act as an expert consultant to the Government, collaborating directly with USACE and the third-party Designer of Record during active design progression. The Government�s intent is to award the Phase I Agreement for Preconstruction Services prior to the 95% design review meeting. Phase 2 of the agreement would include scope for all construction activities necessary to complete the project. The agreement will be Firm-Fixed-Price (FFP). All interested parties should monitor the official solicitation announcement, which will provide complete details and submission instructions. Draft documents may be provided at a future date for feedback and informational purposes only and are subject to change upon issuance of the formal Project RFQ. VIRTUAL PARTICIPATION OPPORTUNITY For those who are unable to attend the Industry Day event in person, the Louisville District plans to stream the event through Microsoft Teams. The details related to the MS Teams event are provided below: Microsoft Teams Meeting Join: https://dod.teams.microsoft.us/meet/993202545806?p=OoGJrDe3gE2XSV5cjy Meeting ID: 993 202 545 806 Passcode: aR7VH6d9

11/5/2026: Amendment 0001 issued Questions & Answers attached _______________________________________________________ This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Quotes are being requested and a separate written solicitation will not be issued. Solicitation number 47PF5327Q0001 is issued as a request for quotation (RFQ) for Elevator Maintenance & Related Services. This acquisition is not set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. (i) Reference Attachment B, Electronic Offer Sheet for a list of line-item number(s) and items, quantities, and units of measure (including option(s). (ii) Reference the Performance Work Statement for a description of requirements for any items to be acquired in performance of this requirement. (iii) Contemplated Period of Performance one year base period (March 1, 2027 to February 29, 2028) and four one-year options and the option to extend. The location of performance is at the Kinneary US Courthouse in Columbus, OH, Bricker Federal Building in Columbus, OH, Bricker Parking Garage in Columbus, OH, and Rice Federal Building & US Courthouse in Dayton, OH. (iv) Reference the Terms and Conditions of this solicitation for a list of solicitation provisions that apply to the acquisition. (v) Reference the Terms and Conditions of this solicitation for a list of the contract clauses that apply to the acquisition. (vi) Solicitation Deadlines: Question Deadline: November 3, 2026, 3:00PM EST Quote Deadline: November 16, 2026, 3:00PM EST Questions and Quote Shall be Submitted to: Natasha Cunningham, Contracting Officer at natasha.cunningham@gsa.gov (vii) Contracting Officer Point of Contact: Natasha Cunningham, 201 Superior Ave, Cleveland, OH 44114, natasha.cunningham@gsa.gov (viii) Services codes: North American Industry Classification System (NAICS): 238290, Other Building Equipment Contractors, with a size standard of $22 million. The product and services code (PSC) is Z1AA Maintenance of Office Buildings Services. (ix) Site Visit: Quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award. A site visit is scheduled for October 26 and 27, see Appendix C. (x) Evaluation will be conducted in accordance with FAR 52.212-2 (GSA Class Deviation RFO-2025-12) and FAR 12.203 (GSA Class Deviation RFO-2025-12).

ROOF REPAIR OR REPLACEMENT

Bowling Alley Maintenance and Repairs - AFRH - Gulfport, MS

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 127EAX26Q0069 is issued as a Request for Quotation (RFQ) for the design, removal and replacement of the Barillas Lookout Tower cab with a new cab and lighting protection system. An optional bid item for the Encino Vista Lookout Tower is to replace/install a brand-new comprehensive lightning protection system. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 236220, Commercial and Institutional Building Construction. The small business size standard is $45M. This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency. The purpose for amendment 00001 is to; 1) Update the Site Visit Dates as follows; a) Barillas Peak Lookout Tower: October 13, Meet at Pecos Ranger District Office @ 9:00am (MST); 32 South Main Street, Pecos, NM 87552, leave office for site by 9:30am (MST) b) Encino Vista Lookout Tower: October 14, Meet at the Coyote Ranger District Office @ 9:00am (MST); 20 Private Drive 1707, Coyote, NM 87012, leave office for site by 9:30am (MST) Provide name of company representative(s) attending the visit to Aaron Trujillo by email aaron.trujillo@usda.gov or phone 575-779-7756. 2) Extend RFI Due Date from 10/01/2026 to 10/19/2026, 2:00 PM Pacific Time. Please submit all RFI's to the following POC's a) Richard Ortega at Richard.ortega@usda.gov b) Troy McCullough at troy.mccullough@usda.gov 3) Extend the Quote Due Date from 10/12/2026 to 11/06/2026, 2:00 PM Pacific Time. Amendment 2 provides the following information: Attachment 2 - Revises/corrects typo's on Schedule of Items Attachment 7 - adds WD NM2026001 Attachment 8 - provides responses to RFI's 001-044 Attachment 9 - provides list of attendees for site visit Attachments 10-17 - requested drawings and specifications

11/5/2026 - Amendment 0001 has been added. See the attached SF30 and the following attachments: 1. Questions and Answers 2. Map 3. Attachment B Submission Package Revised This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Part 12. This announcement constitutes the only solicitation. Quotations are being requested and a separate written solicitation will not be issued. Solicitation number 12444627Q0003 is issued as a Request for Quotation (RFQ) for the repair/replacement of a fire hydrant. This acquisition is set-aside for small business concerns. The applicable North American Industry Classification Standard Code is 237110. The small business size standard is $45M This acquisition is a Total Small Business Set-Aside. All responsible sources may submit a quotation which will be considered by the agency.

MARKET RESEARCH FOR SMALL BUSINESS FIRMS DUE BY 2:00 PM EST on November 16, 2026. THIS IS A SOURCES SOUGHT NOTICE ONLY. This is not a solicitation or a request for proposal and no contract will be awarded from this notice. No solicitation or specifications are available at this time. Please monitor sam.gov as this Sources Sought Notice will not be linked to the solicitation. The General Services Administration (GSA), Acquisition Project Delivery Division, is conducting market research to determine if any SDVOSB, HUB Zone, EDWOSB or 8(a) Small Business Concern has the current relevant qualifications, experience, personnel, and capability to perform the work described herein. All interested Small Business firms should respond. This Sources Sought Notice is being issued by the General Services Administration (GSA), Acquisition Project Delivery for Construction Services for the Department of State (DOS). The place of performance will be the Harry S. Truman (HST) Federal Building (FB), located at 2201 C Street NW, Washington, DC 20520. This is a Repair and Alteration (R&A) project�s anticipated scope of work includes field verification of existing roof and structural conditions, fabrication and installation of anchorage components, structural attachments, drilling/coring, welding where required, roof penetrations, flashing, waterproofing, protection of existing roof systems, rooftop equipment, solar infrastructure, lightning protection systems, drainage components, and occupied interior spaces, as well as testing, labeling, certification, as-built drawings, warranties, and closeout documentation. The contractor will be responsible for conducting a mandatory site visit, identifying and resolving discrepancies or constructability concerns prior to fabrication or installation, submitting required shop drawings and stamped calculations, coordinating with applicable Government stakeholders for site access, security, phasing, and operational impacts, maintaining or reinstating existing roof warranties, implementing compliant fall protection measures, and providing a phasing plan identifying roof zones, work sequence, security boundaries, access and hoisting routes, fall protection methods, and phase durations. The HST FB is fully occupied and will remain so during this construction effort. Special attention needs to be taken to ensure that this modernization does not impact the DOS�s operations and mission. Estimated Construction Cost Range is $15,000,000 and $25,000,000.00. Period of Performance is approximately 850 calendar days from date of Notice to Proceed. NAICS Code: Construction of Buildings - 236220 - Commercial and Institutional Building Construction with a size standard of $45 Million. PSC Code: Z2AA -- Repair or Alteration of Office Buildings All qualified Small Businesses are encouraged to respond. Respondents will not be notified of the results of the evaluation. The main purpose of this Sources Sought Notice is to assist the Contracting Officer in determining if a Set-Aside is the acceptable strategy for the procurement. It is requested that interested parties submit a brief capabilities package. The package shall address, at a minimum, the following: Examples of projects worked within the last five years of similar size, scope, complexity and duration as the work indicated. State whether your firm worked as a prime or subcontractor, contract value, brief description of how the referenced contract relates to the work described and provide an agency or owner point of contact. Company profile, to include number of employees, annual receipts, office location(s), and SAM UEI. Evidence to establish your company's standing as a SDVOSB, HUBZone, EDWOSB or 8(a) small business concern, under applicable NAICS. Describe how you will provide a fair market price given the geographical location of this project. A positive statement of your intention to submit a bid for this requirement if set aside for your socio-economic group. AGAIN, THIS IS NOT A REQUEST FOR PROPOSALS. Responses must contain sufficient detail for the Government to make an informed decision regarding your capabilities. Responses must be received no later than 2:00 PM, Local Time on November 16, 2026. Please submit your capability statement via e-mail to Molly A. Lewis, Contract Officer, at Molly.Lewis@gsa.gov. Questions regarding this notice may be addressed to Molly.Lewis@gsa.gov. Failure to submit all information requested will result in a contractor not being considered as an interested small business concern.

Project Title/Location: DESIGN-BID-BUILD P084 NEXT GENERATION TORPEDO INTEGRATION LAB, NAVAL STATION NEWPORT, NEWPORT RI SOLICITATION NO. N4008526R0178 This acquisition is being solicited on an unrestricted basis with full and open competition. THIS SOLICITATION INCLUDES CMMC LEVEL 1 (SELF) REQUIREMENTS IN ACCORDANCE WITH DFARS 252.204-7025 (DEVIATION 2026-0038) AND 252.204-7021 (DEVIATION 2026-0038). This project is considered a �Large-scale Construction Project� as defined in FAR 22.502 (DEVIATION 2026-O0040). Accordingly, the requirements of FAR Subpart 22.5 (DEVIATION 2026-O0040) will apply. The Offeror shall submit a signed Project Labor Agreement with their Price Proposal submission, in accordance with FAR Provision 52.222-33 (DEVIATION 2026-O0038) and FAR Clause 52.222-34 (DEVIATION 2026-O0038). Offerors that do not include a signed Project Labor Agreement complying with the terms of FAR 52.222-33 (DEVIATION 2026-O0038) and 52.222-34 (DEVIATION 2026-O0038) shall be considered nonresponsive and ineligible for award. All correspondence regarding this solicitation shall be directed via email to Demetrice Jenkins at demetrice.jenkins2.civ@us.navy.mil. Description of Work: This design-bid-build project will include the construction of a multi-story steel frame 12,920 SF laboratory and office facility. The facility will support a variety of functions including depot level testing of critical torpedo systems. Construction consists of a steel frame building with a shallow foundation, metal standing seam roof and masonry and metal panel exterior walls. The project includes all pertinent site preparations and site improvements, including underground stormwater retention system, mechanical and electrical utilities, telecommunications, landscaping, drainage, parking and exterior lighting. For Option 1, P1016 Consolidated RDT&E Systems Facility, this project will include the construction of a multi-story 17,978 SF laboratory facility supported by shallow foundations. The facility will utilize structural steel framing with a standing-seam roof. Exteriors are planned as a combination of masonry veneer and metal panel siding. Demolition includes removal of Building 1272T, a 548 m2 engineering facility.

PROJECT DESCRIPTION: Burro Creek Road is located in Mohave County, 71 miles southwest of Kingman, Arizona. The project is located in rolling terrain, with elevations along this section ranging from approximately 1,885 to 2,255 feet. The project begins at the bridge over Burro Creek and ends at the cattle guard near the intersection with US Hwy 93. The project's length is approximately 1.3 miles. SCOPE OF THE WORK: The proposed of this resurfacing, restoration, and rehabilitation (3R) project is to improve access to the camping and day use areas at the Burro Creek Campground, reduce maintenance costs and erosion, improve sediment control, drainage and safety. The scope of work for this project includes the following major construction activities and items: Pavement Rehabilitation: 1.3 miles of roadway resurfacing incorporating Full Depth Reclamation (FDR) and Asphalt Concrete Pavement, along with applicable fog seals and tack coats. Drainage Improvements: Installation of cross culverts and reconstruction of an existing headwall. Additional drainage work includes ditch grading and reconditioning, berms, bank stabilization, and the addition of flared end sections and riprap aprons throughout the project. Earthwork & Stabilization: Embankment benching, slope stabilization, slope scaling, and specific bridge approach repairs at the eastern abutment to resolve undercutting concerns Safety & Traffic Control Items: Installation of new regulatory and warning signs, pavement markings and the placement of boulders to control public access at specific locations throughout the project. The project is structured with a base Schedule A encompassing the primary roadway rehabilitation, and an Option X which includes work associated with repairing bridge sedimentation, addressing undercutting at the bridge approaches, and boulder placement. PRINCIPAL WORK ITEMS: Roadway Aggregate: 1,600 TONS Ditch Reconditioning: 2,000 LNFT Full Depth Reclamation: 1.3 MILE Asphalt Concrete Pavement: 3,600 TON 18-Inch Pipe Culvert: 100 LNFT 24-Inch Pipe Culvert: 175 LNFT Boulder: 100 EACH ANTICIPATED SCHEDULE: Advertisement � October 2026 Award-January - 2027 Construction � January 2027 through October 2027 ESTIMATED COST RANGE: Between $2,000,000 and $5,000,000

SOURCES SOUGHT DESIGN BUILD 36C26127R0011 This is a pre-solicitation notice under FAR 5.203(a), FAR 5.204, and FAR 36.601-1, and FAR 36.3 of the Department of Veterans Affairs, Network Contracting Office (NCO) 21 intent to contract for a Design Build Contract for the VA Sierra Nevada Health Care System (VASNHCS) Project No. 654-27-130, Eliminate Trip Hazards Facility Wide, located at VASNHCS, Reno, Nevada. The applicable North American Industry Classification System (NAICS) Code is 236220, and the small business size standard is $45 Million. A construction firm shall be responsible for both the design and construction of the project. This design effort includes, but is not limited to, providing Schematic Design (SDs), Design Development (DDs), Construction Documents (CDs), and Construction Period Services (CPS) necessary to perform construction to Eliminate Trip Hazards Facility Wide at VASNHCS. The contract work requires multiple disciplines for the design. The Prime firm shall be a licensed/registered professional firm. The disciplines required include, but are not limited to: Architectural, Civil, Structural, Plumbing, Fire Life Safety, Sustainability, Security, Construction Cost Estimating, Signage/Way-Finding, Landscaping and Geotechnical. Interested parties are advised that in keeping with the Veterans First Contracting program under 38 U.S.C. 8127-8128, as implemented under VA Acquisition Regulation (VAAR) subpart 819.70 and VA Procurement Policy Memorandum 2016-05 Implementation of the Veterans First Contracting Program, if the Contracting Officer has a reasonable expectation that two or more small business concerns owned and controlled by Service-disabled veteran-owned small business (SDVOSB) concerns will submit responses to the solicitation and that award can be made at a fair and reasonable price that offers the best value to the United States, the requirement will be set-aside for SDVOSB concerns. If an SDVOSB set-aside is not appropriate, the requirement will be evaluated to determine whether a Veteran Owned Small Business (VOSB) set-aside is appropriate. The term SDVOSB / VOSB under the Veterans First Contracting program has the same meaning as defined in FAR subpart 2.101, except for acquisitions authorized by 38 U.S.C. 8127 and 8128 for the Veterans First Contracting Program SDVOSB and VOSB concerns must be listed as verified in the SBA Small Business Search (SBS) database at https://search.certifications.sba.gov/ in addition to meeting the NAICS code small business size standard to be eligible for award under Veterans First Contracting Program set-asides. Interested parties are encouraged to provide the following capability information to the Contract Specialist, Nicole Renfrew, via email at Nicole.Renfrew@va.gov by 10:00 A.M. Pacific Standard Time on November 17, 2026. Please complete the attached form with the following information: Business Size (Large/Small) Business Socio-Economic Status (SDVOSB, VOSB, WOSB, 8(a), HUBZone, etc.) Copy of current SAM record SAM Unique Entity Identification (UEI) number Copy of SBA SBS record showing verified status: SDVOSB/VOSB concerns only. Bonding Capacity: Provide your surety name, your maximum bonding capacity per project and your aggregate maximum bonding capacity. The bonding capacity per project must be $5 Million to be deemed acceptable for this notice. The Government will use this information when determining its business set-aside decision, taking into consideration the requirements outlined in VA Procurement Policy Memorandum 2016-05 Implementation of the Veterans First Contracting Program. It is anticipated that the solicitation will be issued on or about December 01, 2026. It is the intent of the Government to make a single firm-fixed price Design Build contract award for this requirement. Questions regarding this Sources Sought notice should be directed, in writing, to the Contract Specialist Nicole Renfrew, via email at Nicole.Renfrew@va.gov. This synopsis is not to be construed as a commitment by the Government and no contract will be awarded as a direct result of this Sources Sought announcement. Attachment 1 Sources Sought Response Form